高地震区公路隧道地震动力响应分析

基于土一结构相互作用理论,对高地震区一实际重大工程的公路隧道洞口段结构进行了抗震计算,得到了衬砌结构各控制点的位移、加速度及内力响应规律。结果表明：在人工合成地震波条件下,衬砌墙脚、拱腰为抗震薄弱位置;结构的加速度波形与输入波形相似;这些结果为抗震设计提供了一些依据。     

空间索引与多尺度表达的一体化模型研究

在分析各种常用索引的基础上,依据各自的适用范围,提出了对点对象建立格网索引,对线、面对象建立改进四叉树索引的组合优化策略。设计的改进四叉树索引避免了传统四叉树的重复索引,提高了数据访问的效率。     

上海市建设用地勘测定界若干问题探讨

对在上海市建设用地勘测定界过程中涉及的土地权属界线认定、原土地用途划分时所现的若干问题进行了详细探讨,同时从政策角度、技术角度提出了以上问题的相应解决途径。     

提高管线探测水平分辨率的技术方法

在平顶山矿工路路面改造工程中,使用GX-2型及RD-4000型地下管线探测仪探测地下管网布设情况。根据地下管线种类、管线布设方位、埋置深度、探测难度大小进行了多次试验,在此基础上确定了电磁探测技术与方法：利用直连法提高被测管线中的交变电流,压制邻近平行管线和地下介质中的异常反映;在多管并存、且间距较小的情况下,应选择“梯度法”对磁场水平分量垂直梯度ΔHx进行观测,以得到最大清晰异常;另外,还应根据具体情况,合理选择诸如压制旁侧管线法、选择发射法、偏移感应法、动源发射法等发射方式,保证目标管线中有较强异常呈现。在管线密集区,应尽可能地降低工作频率,以减小旁侧管线中产生的二次电流及二次磁场;为防止信噪比下降,可适当减小收发距,以提高接收机的灵敏度。     

Multi-Scale Texture Modeling

Patterns of crystallographic preferred orientation are referred to as texture. The specific subject of texture analysis is the experimental determination and interpretation of the statistical distribution of orientations of crystals within a specimen of polycrystalline material, which could be metals or rocks. The objective is to relate an observed pattern of preferred orientation to its generating processes and vice versa. In geosciences, texture of minerals in rocks is used to infer constraints on their tectono-metamorphic history. Since most physical properties of crystals, such as elastic moduli, the coefficients of thermal expansion, or chemical resistance to etching depends on crystal symmetry and orientation, the presence of texture imparts directional properties to the polycrystalline material. A major issue of mathematical texture analysis is the resolution of the inverse problem to determine a reasonable orientation density function on SO(3) from measured pole intensities on , which relates to the inverse of the totally geodesic Radon transform. This communication introduces a wavelet approach into mathematical texture analysis. Wavelets on the two-dimensional sphere and on the rotational group SO(3) are discussed, and an algorithms for a wavelet decomposition on both domains following the ideas of Ta-Hsin Li is given. The relationship of these wavelets on both domains with respect to the totally geodesic Radon transform is investigated. In particular, it is shown that the Radon transform of these wavelets on SO(3) are again wavelets on . A novel algorithm for the inversion of experimental pole intensities to an orientation density function based on this relationship is developed.     

CSU－RAMS模式在区域气侯模拟中的应用

将ＣＳＵ－ＲＡＭＳ（中尺度）数值模式改造成“区域气候数值模式”以及进行区域气候数值模拟的试验研究。说明将有限区域中尺度数值模式与ＧＣＭ模式嵌套应用到区域气候数值模拟研究上能够取得有意义的结果。它能在一定程度上改善ＧＣＭ模式的不足。可以更为细致地描述大气环流的变化特征,是了解区域气候变化的有效方法之一。     

The propagation of a single shear crack: A displacement discontinuity model

Numerical studies using the displacement discontinuity method show that a single shear crack under compression propagates in its own direction, because such propagation results in the maximum release of strain energy. The methods of linear elastic fracture mechanics may not be used for such a closed crack, and the stress intensity factors are meaningless in that case. Laboratory observations of propagation by means of kinks at an angle of approximately 70° to the crack may be due to heterogeneities, to the effect of a preexisting crack, to end effects, to microcracking, or to some combination of these factors. Such kinks may thus be local phenomena which cannot release most of the strain energy, and are not incompatible with our numerical results which are based on a global energy balance.     

Estimation of statistical parameters for censored lognormal hydraulic conductivity measurements

Field tests of hydraulic conductivity (e.g., injection test, pumping test, etc.) in low permeability formations are subject to censoring due to the detection limit of the instruments used. An iterative method of estimating the mean and variance of hydraulic conductivity data with a presumed log-normal distribution function is presented. This method accounts for the data that are actually below the lower detection limit (called truncated data) and thus gives distribution parameters that are more representative for the underlying distribution. The proposed method is then tested on two simulated normally distributed random datasets having different variances. The results show that the means and variances estimated by the proposed method are very accurate. Finally, the method is used to estimate the mean and variance of hydraulic conductivity data from single hole water injection tests in a fractured geological formation.     

Estimation of covariance matrix from geochemical data with observations below detection limits

Multivariate statistical analyses have been extensively applied to geochemical measurements to analyze and aid interpretation of the data. Estimation of the covariance matrix of multivariate observations is the first task in multivariate analysis. However, geochemical data for the rare elements, especially Ag, Au, and platinum-group elements, usually contain observations the below detection limits. In particular, Instrumental Neutron Activation Analysis (INAA) for the rare elements produces multilevel and possibly extremely high detection limits depending on the sample weight. Traditionally, in applying multivariate analysis to such incomplete data, the observations below detection limits are first substituted, for example, each observation below the detection limit is replaced by a certain percentage of that limit, and then the standard statistical computer packages or techniques are used to obtain the analysis of the data. If a number of samples with observations below detection limits is small, or the detection limits are relatively near zero, the results may be reasonable and most geological interpretations or conclusions are probably valid. In this paper, a new method is proposed to estimate the covariance matrix from a dataset containing observations below multilevel detection limits by using the marginal maximum likelihood estimation (MMLE) method. For each pair of variables, sayY andZ whose observations containing below detection limits, the proposed method consists of three steps: (i) for each variable separately obtaining the marginal MLE for the means and the variances, , , , and forY andZ: (ii) defining new variables by and and lettingA=C+D andB=C–D, and obtaining MLE for variances, and forA andB; (iii) estimating the correlation coefficient _YZ by and the covariance _YZ by . The procedure is illustrated by using a precious metal geochemical data set from the Fox River Sill, Manitoba, Canada.     

Global climatic change – the latest scientific understanding

IPCCs statement in its 1995 report (IPCC 1996) that a human influence was discernible in global climate has been widely quoted but often misunderstood. The character of the evidence underpinning this detection statement is explained so that its strengths and weaknesses can be better understood and the subtleties of its message better appreciated. To demonstrate the close linkage between the government-approved summary and the underlying chapters of the IPCC report the detailed evolution of the detection statement from first draft through to the form finally approved by the IPCC is described.