AutoCAD与其他常用软件的数据转换

本文就AutoCAD与生产应用中常用的ARCGIS、ARC／INFO、MicroStation、3DS等软件系统之间的数据转换作一些浅谈。     

泥浆脉冲随钻测量系统研究

介绍了泥浆脉冲随钻测量系统信号传输的3种基本工作方式:压力正脉冲、压力负脉冲和连续压力波.泥浆脉冲信号在传输过程中主要受钻探泵、井底动力机、泥浆中的气泡及活动钻具的干扰;钻井深度、泥浆中的气泡量、含砂量和泥浆类型对信号衰减有一定的影响.     

固沙林庇护区内降尘特征的初步观测

采用野外定位实测法,连续两年对科尔沁沙地24龄人工固沙杨树(Populussimonii)林庇护区内4～6月份及强沙尘暴事件中的降尘特征进行了观测研究。结果表明:(1)林地庇护区内4、5月份的降尘量较多,分别为273和437kg/hm2,6月份的降尘量较少,为171kg/hm2。(2)林地中央的滞尘效应在风蚀季节和强沙尘暴天气过程中十分显著。(3)林地庇护区内的降尘中粒径<0.02mm颗粒含量占60.7%,降尘中的全C、全N和速效P含量分别高达1.676%、0.163%和210.66mg/kg,这对风沙土表层土壤的细化和养分的积累具有重要的生态学意义。     

Soil property variation mapping through data mining of soil category maps

Spatial information on soil properties is an important input to hydrological models. In current hydrological modelling practices, soil property information is often derived from soil category maps by the linking method in which a representative soil property value is linked to each soil polygon. Limited by the area‐class nature of soil category maps, the derived soil property variation is discontinuous and less detailed than high resolution digital terrain or remote sensing data. This research proposed dmSoil, a data‐mining‐based approach to derive continuous and spatially detailed soil property information from soil category maps. First, the soil–environment relationships are extracted through data mining of a soil map. The similarity of the soil at each location to different soil types in the soil map is then estimated using the mined relationships. Prediction of soil property values at each location is made by combining the similarities of the soil at that location to different soil types and the representative soil property values of these soil types. The new approach was applied in the Raffelson Watershed and Pleasant Valley in the Driftless Area of Wisconsin, United States to map soil A horizon texture (in both areas) and depth to soil C horizon (in Pleasant Valley). The property maps from the dmSoil approach capture the spatial gradation and details of soil properties better than those from the linking method. The new approach also shows consistent accuracy improvement at validation points. In addition to the improved performances, the inputs for the dmSoil approach are easy to prepare, and the approach itself is simple to deploy. It provides an effective way to derive better soil property information from soil category maps for hydrological modelling. Copyright © 2014 John Wiley & Sons, Ltd.     

New Modes of Environmental Governance in Greater Sage-Grouse Conservation in Oregon

Abstract

Natural resource challenges often span administrative jurisdictions and include actors and processes operating at different spatial and political scales. We applied concepts of new environmental governance to analyze Oregon’s approach to greater sage-grouse conservation. Through one in-depth case study in Lake County, we traced features of new environmental governance (cross-scale interactions, decentralization, and capacities of actors) through different governance levels. Interviews and qualitative analysis revealed that decentralization of administrative functions facilitated cross-scale interactions and relied on intermediaries, gap-filling, and perceptions of legitimacy at lower levels. State and agency guidelines steered the effort and were accompanied by financial and technical resources from multiple arenas, which increased local capacity. This study adds to the understandings of environmental governance for implementing multi-actor, multi-level conservation arrangements in resource-dependent communities. Further exploration of connections between higher levels and local contexts will reveal important, new ways to link policies with on-the-ground outcomes.     

Influence of heterogeneity on unsaturated hydraulic properties: (1) local heterogeneity and scale effect

Spatial heterogeneity is ubiquitous in nature, which may significantly affect the soil hydraulic property curves. The models of a closed‐form functional relationship of soil hydraulic property curves (e.g. VG model or exponential model) are valid at point or local scale based on a point‐scale hydrological process, but how do scale effects of heterogeneity have an influence on the parameters of these models when the models are used in a larger scale process? This paper uses a two‐dimensional variably saturated flow and solute transport finite element model (VSAFT2) to simulate variations of pressure and moisture content in the soil flume under a constant head boundary condition. By changing different numerical simulation block sizes, a quantitative evaluation of parameter variations in the VG model, resulting from the scale effects, is presented. Results show that the parameters of soil hydraulic properties are independent of scale in homogeneous media. Parameters of α and n in homogeneous media, which are estimated by using the unsaturated hydraulic conductivity curve (UHC) or the soil water retention curve (WRC), are identical. Variations of local heterogeneities strongly affect the soil hydraulic properties, and the scale affects the results of the parameter estimations when numerical experiments are conducted. Furthermore, the discrepancy of each curve becomes considerable when moisture content becomes closer to a dry situation. Parameters estimated by UHC are totally different from the ones estimated by WRC. Copyright © 2012 John Wiley & Sons, Ltd.     

Thresholds of intrabed flow and other interactions of turbidity currents with soft muddy substrates

Controlled laboratory experiments reveal that the lower part of turbidity currents has the ability to enter fluid mud substrates, if the bed shear stress is higher than the yield stress of the fluid mud and the density of the turbidity current is higher than the density of the substrate. Upon entering the substrate, the turbidity current either induces mixing between flow‐derived sediment and substrate sediment, or it forms a stable horizontal flow front inside the fluid mud. Such ‘intrabed’ flow is surrounded by plastically deformed mud; otherwise it resembles the front of a ‘bottom‐hugging’ turbidity current. The ‘suprabed’ portion of the turbidity current, i.e. the upper part of the flow that does not enter the substrate, is typically separated from the intrabed flow by a long horizontal layer of mud which originates from the mud that is swept over the top of the intrabed flow and then incorporated into the flow. The intrabed flow and the mixing mechanism are specific types of interaction between turbidity currents and muddy substrates that are part of a larger group of interactions, which also include bypass, deposition, erosion and soft sediment deformation. A classification scheme for these types of interactions is proposed, based on an excess bed shear stress parameter, which includes the difference in the bed shear stress imposed by the flow and the yield stress of the substrate and an excess density parameter, which relies on the density difference between the flow and the substrate. Based on this classification scheme, as well as on the sedimentological properties of the laboratory deposits, an existing facies model for intrabed turbidites is extended to the other types of interaction involving soft muddy substrates. The physical threshold of flow‐substrate mixing versus stable intrabed flow is defined using the gradient Richardson number, and this method is validated successfully with the laboratory data. The gradient Richardson number is also used to verify that stable intrabed flow is possible in natural turbidity currents, and to determine under which conditions intrabed flow is likely to be unstable. It appears that intrabed flow is likely only in natural turbidity currents with flow velocities well below ca 3·5 m s^?1, although a wider range of flows is capable of entering fluid muds. Below this threshold velocity, intrabed flow is stable only at high‐density gradients and low‐velocity gradients across the upper boundary of the turbidity current. Finally, the gradient Richardson number is used as a scaling parameter to set the flow velocity limits of a natural turbidity current that formed an inferred intrabed turbidite in the deep‐marine Aberystwyth Grits Group, West Wales, United Kingdom.     

Magnetic Influences of Cement Dust on Soil in Industrial Area and Its Environmental Implications

To monitor environmental implications of cement dust on soil in industrial area, magnetic parameters and mineral compositions were measured by the samples of the cement dust, cement factory dustfall, cement, coal ash, topsoil of green space in the factory and topsoil outside the factory. Results showed that the major magnetic minerals in the samples were magnetite, the magnetic mineral particle size of cement dust, dustfall, cement and coal ash was coarse Multi-Domian (MD) and Pseudo-Single-Domain (PSD). As topsoil of green space in the factory and topsoil outside the factory were polluted by cement dust, their magnetic properties had been obviously changed; the concentration of magnetic minerals elevated and particle size became coarser. The magnetic parameters (χ_fd,χ_ARM/χ,χ_ARM/SIRM) value can reflect the pollution level of the soil, the lower its value was, the more serious soil was polluted. X-ray diffraction results showed that the mineral compositions of the topsoil of green space in the factory and topsoil outside the factory were quartz and calcite, which were the same as cement dust. Magnetic parameters combination characteristics of topsoil can monitor the soil environmental changes in cement industry area.     

基岩水井压裂增水机理分析

基岩地层压裂增水与岩层性质密切相关,不同岩性其力学性质及其裂隙构造不同,压裂机理与工艺方法就不同。根据基岩地下水岩层特点,结合水力压裂增水试验,着重分析了水力压裂的形成机制,探寻了不同岩层及其力学性质与压裂的关系。     

油气上窜速度实用计算方法

油气上窜速度对钻井施工中下一步施工方案的制定具有重要参考价值。文章在总结分析前人经验的基础上结合现场施工实际对传统油气上窜速度计算公式加以修正,并对修正后的公式中涉及到的参数进行了逐一分析,在不影响正常施工工序的条件下使公式中各参数取值准确性进一步提高。通过现场工程测试,该方法简单实用且计算准确性较高。该计算方法在保证计算结果准确性的同时,也具备较强的现场可操作性,通过大量的实践检验后可进一步推广。