Accuracy improvement of ASTER stereo satellite generated DEM using texture filter

The grid DEM(digital elevation model) generation can be from any of a number of sources:for instance,analogue to digital conversion of contour maps followed by application of the TIN model,or direct elevation point modelling via digital photogrammetry applied to airborne images or satellite images.Currently,apart from the deployment of point-clouds from LiDAR data acquisition,the generally favoured approach refers to applications of digital photogrammetry.One of the most important steps in such deployment i...     

灰岩成因-结构分类的进展及其相关问题讨论

由Folk在1959，1962年及Dunham在1962年所提出的灰岩因－结构分类体系，具有划时代的意义，至今还得到极为广泛的应用，Embry和Klovan在1971年关于生物礁灰岩的成因－结构分类，即关于骨架灰岩，障积灰岩，粘结灰岩的成因－结构分类的第一次重要的补充，它解决了与生物作用有关的灰岩不符合Folk和Dunham的结构成熟度概念的矛盾，而对成岩作用及其产物的更深入研究，地质学家们发现了许多布成岩作用形成的泥晶化作用和颗粒化作用，由它们所形成的岩石也不符合Folk和Dunbam的结构成熟度概念，导致了Wright在1992年提出了一个更完整的灰岩成因－结构分类体系，把灰岩分为生物作用类，沉积作用类及成岩作用类三大类，即Folk和Dumban描述的分类均属于沉积作用类。要特别指出的是，在从松散沉积物到已石化的竖硬石头的成岩过程中，不但灰岩的结构会发生变化，而且组分也会发生变化，从而使灰岩的成因－结构分类变得更加复杂，关于这方面还存在许多有待进一步研究的问题。在审视Wright在1992年的分类体系时，有必要在沉积作用类中增加“非正常沉积作用亚类灰岩”，针对许多非礁相地层中发育的由生物礁岩石构成的生物层及生物丘，因而有必要对生物作用灰灰岩进行更进一步的分类。     

柯树北岩体岩石谱系单位的建立及构造环境分析

柯树北岩体为陆壳改造型（S型）花岗岩，具有结构和成分演化序列，运用岩石结构列序法，将其划分为6个单元，归并为1个超单位，按侵入体空间展布形式，岩体地质学，岩石学，构造地球化学等资料，提出了岩浆侵位是受区域拉张应力控制的认识。     

湖北清江画面石图案的纹理类型及其地质成因

清江画面石是近二十年来出现的一种新的观赏石石种,原石主要为中泥盆统云台观组灰白色石英砂岩.清江画面石具有观赏价值的关键因素是构成画面的各类图案.本文将画面石图案的纹理类型划分为三种类型——线型、条带型和梳型,并对每种类型进行了详细描述.在野外调查基础上,通过岩石特征、微观结构构造、地球化学特征等综合对比分析,对三种类型的清江画面石图案的地质成因进行初步讨论,认为线型（即裂隙）的形成可能与燕山期或之后区域构造活动有关,条带型（即层理）形成于泥盆纪的原生沉积构造,而梳型则可能是由于外来物质在成岩期后沿着层理面或纹层面向下渗流而成,推测形成于燕山期之前,但需进一步研究确定.三种图案中的不同颜色,是由含有铁锰质氧化物的地下水或地表径流水等沿裂隙、层理面或渗流面浸染或部分交代填隙物而成,在现代河流下切作用下,崩落入水,经过流水搬运、冲刷,最终形成了清江画面石.     

From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.     

Textural segmentation of digital rock images into bedding units using texture energy and cluster labels

The texture of digital rock images, as recorded, for instance, with borehole imaging devices, is shown to reflect different bedding types. Textural segmentation of borehole images, therefore, subdivides the recorded sequence into bedding units. We show that a textural segmentation algorithm based on the concept of texture energy achieves good results when compared with synthetic as well as real data in which petroleum geologists have performed zonations on cores. Texture energy involves filtering of the original image with a set of texture sensitive masks. The filtering is done as a finite convolution over the size of the masks. On the resulting images the variance is computed over a relatively large sliding window, which, in its practical implementation, covers the full width of the image. The resulting nine one-dimensional curves are then clustered hierarchically into a user-determined number of image texture or lithological bedding classes. Principal component analysis previous to clustering can be used to reduce redundancy in the data. A recurring and relatively ill-defined problem in this field are macro-textures, i.e., the cyclic interbedding of two or more bedding types. We show that sliding Fourier transforms and variable mask scale can successfully address the zonation of macro-textures. In general, the method gives best results with mask sizes equivalent to 2–4 centimeters, reflecting the length scale at which the investigated geological bedding seems to have its highest variation.     

湖北宜昌石板溪金矿区断层空间结构及其控矿规律研究

断层空间结构包括变形结构和几何结构两部分。本文在解析石板溪金矿区主要断层变形结构和几何结构的基础上，探讨了其空间结构模式和控矿规律。     

大青山造山带中基底再造杂岩的特征及其指示意义

大青山造山带中基底再造杂岩主要由高温韧性剪切变形变质作用的糜棱片麻岩类、部分重烙作用形成的混合岩化糜棱片麻岩类及太古宙地壳残块三部分组成。进一步研究表明该基底再造条岩不仅可以作为一个特定的构造岩性单元,属于造山带根部地壳的一部分,而且其中前两部分既不属于太古富变质上壳岩和侵入岩系,也不属于早元古代变质上亮岩,而是早元古代造山带演化过程中,变形变质作用和部分重熔作用对太古宙基底综合改造作用的产物。基底再造杂岩的研究为进一步探讨前寒武纪克拉通内硅铝壳造山作用的性质、规模和成因机制提供了极为重要的地质证据和信息。     

安山岩中黄铜矿矿石分析和制硫酸铜工艺的研究

安山岩中的黄铜矿是庐江中生代陆相火山热液型铜矿床的原生矿，矿石中主要伴生黄铁矿及少量斑铜矿、赤铁矿和褐铁矿。物相分析结果，黄铜矿的粒度很细，只有细磨才能单体解离；它在矿石中分布极不均匀，且与脉石矿物接触疏松，适于粗磨抛尾。物性分析结果，黄铜矿在４００～５３０℃、斑铜矿在４５０～６００℃、黄铁矿在５００～６８０℃氧化分解。实验研究表明，矿石经磨碎磁选，大部分的粗粒级的铁矿物能够回收；粗磨抛尾可获得铜、硫的粗精矿；然后再经硫酸化焙烧、酸浸、过滤、提纯、浓缩结晶可制得工业级硫酸铜。浸渣做炼铁原料，黄钾铁矾做Ｆｅ２Ｏ３颜料，有时还可回收金、银。     

我国藻菌生物成因的金矿研究

生物成矿作用分为生物直接成矿作用和生物间接成矿作用,生物直接成矿作用的标志结构为生物有机胶体结构。生物间接成矿作用的标志结构为“矿交代生物”结构,我国陕西二台子－半仓沟金矿,四川东北寨金矿、川甘拉尔玛金矿和云南金厂金矿等均为典型为实例,矿石中普遍含有多种金属矿物生物结构,还含多种生物有机组分。成矿物质具有多源性特征,硫同位素具混合型特征,矿床成型机制可与“人工碳吸附系统”聚金机制相类比,含金层位可