应力路径和干湿状态对堆石料颗粒破碎的影响研究

堆石料颗粒破碎是引起高土石坝变形的重要因素。在大坝填筑、蓄水期,堆石料的应力路径和干湿状态均是变化的。通过大型三轴试验,系统地研究了应力路径和干湿状态对堆石料颗粒破碎规律的影响。试验结果表明：（1）相同初始条件下,按不同应力路径达到同一轴向应变停机时测定的颗粒破碎率是不同的,等围压?3试验产生的颗粒破碎最大,等平均主应力p试验的次之,等最大主应力?1试验的最小,但不同应力路径下的颗粒级配演化规律是一致的。（2）相同初始条件下,湿样的颗粒破碎率明显高于干样,且二者的差距随着围压的增大而增大,不同干湿条件下的颗粒级配演化规律同样是一致的。（3）建立的考虑母岩强度的颗粒破碎率与塑性功的关系可以较好地统一描述不同应力路径及干湿状态下的颗粒破碎。该研究成果可为建立复杂应力路径及干湿变化条件下考虑颗粒破碎的堆石料弹塑性本构模型提供依据。     

考虑颗粒破碎效应的堆石料静动力本构模型

为合理反映颗粒破碎对堆石料力学特性的影响,基于试验结果分析,得出了堆石料在压缩和剪切作用下的颗粒破碎特性规律。通过引入压缩破碎和剪切破碎的相关参数,借鉴已有本构模型的合理定义,吸收临界状态理论和边界面理论的优点,发展了考虑颗粒破碎和状态相关的堆石料静动力统一弹塑性本构模型,并阐述了模型参数的确定方法。该模型不仅能够反映堆石料在静力荷载作用下的低压剪胀、高压剪缩、应变软化和硬化等特性,还能够反映在循环荷载作用下应力-应变的滞回特性和残余变形的累积效应。最后为验证模型的合理性,分别对堆石料的静力三轴和循环三轴试验进行了数值模拟预测,结果表明：模型预测与试验数据吻合良好,所提出的本构模型能够合理地描述颗粒破碎对堆石料静动力变形特性的影响。     

双轴压缩条件下颗粒材料中力链的演化

针对无黏性颗粒材料,开展了柔性边界双轴压缩数值试验,分析了不同围压下力链的数量、方向概率等随轴向应变的变化。研究结果表明：不断加载使得游离的高应力颗粒有所减少,荷载更多的被力链承担;统计意义上,力链最大长度为9个颗粒。轴向±30o范围内力链概率随应变的发展与偏应力一致,而与其邻接的[40o,60o]和[120o,140o]两个方向上的力链概率随应变的发展与偏应力相反;双轴试样剪切破坏时有单剪切带和双剪切带两种模式,当[40o,60o]和[120o,140o]两个角度区间的力链概率有较大差异时,剪切带出现在力链较少的角度区间;当这两个角度区间力链概率接近时,试样中将出现两个剪切带。     

砂土微观结构样品制备技术及量化方法研究

土体的微观结构是决定其工程特性的重要内在因素,但对于砂土而言,如何制备适合微观分析的样品以及快速准确量化结构参数一直面临诸多挑战。为此,提出一种真空冷冻干燥?注胶相结合的砂土样品制备技术,该技术可在有效去除土样水分的同时保持样品原状结构不被扰动,并可用于后续加工处理。针对不同粒度的砂土样品,分别使用扫描电子显微镜和光学显微镜对制备的试样进行观察,基于自主研发的土体微观结构定量分析系统SMAS对拍摄的照片进行精细量化分析,提出了由土颗粒数量、颗粒周长、表观孔隙率、形状系数、等效直径、分形维数和形态比等参数构成的量度指标体系对砂土样品微观结构特征进行定量评价。研究结果表明：提出的真空冷冻干燥?注胶相结合的砂土样品制备技术具有操作简单、稳定可靠等特点,能有效维持砂土的原状结构;比较而言,扫描电镜更适用于粉细砂的微观结构分析,而光学显微镜更适用于中粗砂的微观结构分析;SMAS能有效识别微观结构图像中的土颗粒及孔隙,为定量分析砂土或其他土体的微观结构特征提供了高效的工具。     

贵州上二叠统龙潭组煤系地层地球化学特征及物源分析:来自黔普地1井的证据

为厘清贵州上二叠统龙潭组煤系地层的物源,以黔西南地区黔普地1井为研究对象,采集了上二叠统龙潭组的岩心进行稀土元素分析。结果表明,龙潭组的稀土总量较高(177.03×10^-6～592.58×10^-6),轻、重稀土分馏明显,稀土元素配分模式呈轻稀土富集、重稀土相对亏损的右倾型;(La/Sm)_N为2.63～4.72,(Gd/Yb)_N值为1.47～2.218,表明轻稀土分馏较重稀土严重;δEu无异常。研究表明,其形成的构造环境与大陆边缘与大陆弧相近,推测黔普地1井二叠系龙潭组物质来源以玄武岩为主。     

‘Box‐Profile’ Ion Implants as Geochemical Reference Materials for Electron Probe Microanalysis and Secondary Ion Mass Spectrometry

Although electron probe microanalysis and secondary ion mass spectrometry are widely used analytical techniques for geochemical and mineralogical applications, metrologically rigorous quantification remains a major challenge for these methods. Secondary ion mass spectrometry (SIMS) in particular is a matrix‐sensitive method, and the use of matrix‐matched reference materials (RMs) is essential to avoid significant analytical bias. A major problem is that the number of available RMs for SIMS is extremely small compared with the needs of analysts. One approach for the production of matrix‐specific RMs is the use of high‐energy ion implantation that introduces a known amount of a selected isotope into a material. We chose the more elaborate way of implanting a so‐called ‘box‐profile’ to generate a quasi‐homogeneous concentration of the implanted isotope in three dimensions, which allows RMs not only to be used for ion beam analysis but also makes them suitable for EPMA. For proof of concept, we used the thoroughly studied mineralogically and chemically ‘simple’ SiO₂ system. We implanted either ⁴⁷Ti or ⁴⁸Ti into synthetic, ultra‐high‐purity silica glass. Several ‘box‐profiles’ with mass fractions between 10 and 1000 μg g^?1 Ti and maximum depths of homogeneous Ti distribution between 200 nm and 3 μm were produced at the Institute of Ion Beam Physics and Materials Research of Helmholtz‐Zentrum Dresden‐Rossendorf. Multiple implantation steps using varying ion energies and ion doses were simulated with Stopping and Range of Ions in Matter (SRIM) software, optimising for the target concentrations, implantation depths and technical limits of the implanter. We characterised several implant test samples having different concentrations and maximum implantation depths by means of SIMS and other analytical techniques. The results show that the implant samples are suitable for use as reference materials for SIMS measurements. The multi‐energy ion implantation technique also appears to be a promising procedure for the production of EPMA‐suitable reference materials.     

地质雷达方法在上海市轨道交通明珠线工程中的应用

地质雷达方法在上海市轨道交通明珠线工程中的应用表明,此方法在探测地下障碍物中能依靠雷达图象识别其类型、材质、深度等,有利于快速、准确定位,有一定的优越性。     

Duluth Complex apatites: Age reference material for LA–ICP–MS‐based fission‐track dating

Anorthositic series apatites of the Duluth Complex, Minnesota, USA, have high spontaneous fission‐track densities of up to ~10⁷ cm^–2 and a homogeneous age of ~900 Ma, allowing high‐precision fission‐track dating based on LA–ICP–MS U analysis. Absolute fission‐track dating, track‐length measurement and chemical composition analysis were performed to evaluate a cooling history, which is essential for age reference materials. Preliminary inverse modelling for a sample with a shortened track‐length distribution yielded a monotonic cooling history from ~100°C at 925 Ma. The apatites incur an over‐etching problem when employing the commonly used etching protocol involving 5.5 M HNO₃.     

Numerical evaluation of soft inter‐slab joint in concrete‐faced rockfill dam with dual mortar finite element method

Recently constructed concrete‐faced rockfill dams (CFRDs) often use soft inter‐slab joints to prevent axial compression‐induced extrusion damage in the concrete face. Due to the complexity of the multibody contact and the lack of information on the actual behavior of soft joints, it is highly challenging to numerically assess the effect of soft joints in CFRDs. In this paper, we present a numerical approach for the three‐dimensional modeling of CFRDs with hard and soft joints. A dual mortar finite element method with Lagrange multiplier is developed to treat the multibody contact in hard joints with impenetrability condition. The soft joint slab‐filler‐slab contact system is modeled using an equivalent contact interface approach, where the soft contact constraints are imposed using a perturbed Lagrange formulation. Through a series of laboratory tests, the mechanical behavior of soft joint is investigated. An extrusion model for the soft joint is presented and implemented in the dual mortar finite element method. The proposed numerical method is applied to the three‐dimensional analysis of Tianshengqiao‐1 CFRD. Despite the complex multibody contact and strong material and geometry nonlinearities in the CFRD, the proposed method is stable and capable of capturing salient characteristics of the CFRD. Numerical results show that in Tianshengqiao‐1, the employment of soft joints can effectively reduce the axial compression stress, thus greatly alleviating the risk of extrusion damage in the concrete face.     

A method for evaluating the longitudinal functional connectivity of a river–lake–marsh system and its application in China

The longitudinal functional connectivity of a river–lake–marsh system (RLMS) refers to the actual water-mediated transport of material from upstream to downstream areas along a spatial gradient and is fundamental to understand hydrological and biogeochemical cycles. However, due to a lack of consensus on appropriate data and methods, the quantification of connectivity is still a challenge, especially at the catchment scale. We developed a new method to evaluate longitudinal functional connectivity based on fluxes of materials (water, sediment, and chemicals) along a RLMS. The calculation of fluxes is based on the longitudinal pattern of terrain gradient, which influences transport efficiency, and on contributions from hillslopes, which set the initial spatial template of material loading to the RLMS. We evaluate the contributions from hillslopes to RLMS based on a new modified version of the index of sediment connectivity (IC) proposed by Borselli et al. (2008) and revised by Chartin et al. (2017).We applied this method to the Baiyangdian Basin covering an area of 3.4 × 10⁴ km² in China and quantified longitudinal functional connectivity during normal, wet, and dry periods(April, July and December) in year 2016. We found that areas with good structural connectivity exhibited poor functional connectivity during the normal and dry periods. Modelling testing with discharge data from hydrological stations and measured chemicals from Baiyangdian Lake was satisfactory in test periods. We conclude that public data and Digital Elevation Model-derived information can be used to reliably map the longitudinal functional connectivity of RLMSs. The proposed method provides a useful tool for monitoring and restoring the longitudinal functional connectivity of RLMSs and our results indicate that efforts aimed at restoring functional connectivity in RLMSs should take into account landscape patterns that can greatly influence fluxes in the watershed.