金刚石钻头制造的新型模具材料及模具成型工艺

针对无压浸渍法制造金刚石钻头存在模具费用高、模具加工周期长等缺点,研究了一种新型模具材料（陶瓷粉）取代石墨材料,并研究了一种全新的模具成型方法,简化了模具制造工序,降低了成本。     

Silicon Isotope Geochemistry of Micro—Fine Disseminated Gold Deposits in SW Guizhou and NW Guangxi,China

Quartz was studied with respect to its silicon isotopic composition and cathodoluminescence in micro-fine disseminated gold deposits in SW Guizhou and NW Guangxi.The results showed that quartz in wall rocks.ores and that in association with hydrothermal silicification are distinctive in silicon isotopes and cathodoluminescence characters.Quartz in association with primary silicification is non-luminescent while that in wall rocks and associated with secondary silicification exhibits striking luminescence.Based on the dynamic fractionation of silicon isotopes,it is suggested that the mineralization was accompanied by rapid transport of aprimary siliceous fluid along the major deep fault system into subordinate faults before ore components deposited in favorable strata via penetration and metasomatism.Therefore,a deep origin is implicit for gold deposits of this type.     

ER智能材料在结构振动控制中的应用

ＥＲ智能材料是一种可控流体,它能在电场的作用下可从牛顿流体变为剪切屈服应力较高的粘塑性体,且这种转变连续,可逆,迅速,因此,可用它来制作可调阻尼器,实现对工程结构风振和地震反应半主动控制,本文在简要地介绍了ＥＲ智能材料电流变效应的基本原理和影响因素之后,建立了适用于土木工程结构控制用的二种类型的ＥＲ可调阻尼器的工作原理和力学模型,并在介绍了ＥＲ可控阻尼器对工程结构风振和地震反应半主动控制的实施原则     

灰色聚类与圈闭优选

含油气圈闭系统是一种信息不完全的灰色系统,赖以评价圈闭系统的各项参数的原始获取和定量化过程都具有很大的不确定性,也就是说,这些评价参数都是灰参数,灰色聚类恰恰是解决这种确定性差的多参数评价问题。文中探讨了白化函数的构造方法,指出针对不同约束性能参数,白化参数的构造方式也应区别对待,并提出一种对比隶属函数方法,可以对多个圈闭进行严格的优劣排序,结果令人满意。     

Platinum-Group Element Geochemical Certified Reference Materials (GPt1-7)

Unlike the situation for other elements, few reference materials certified for the platinum-group elements are currently available. Therefore, the GPt1-7 series of PGE geochemical CRMs, prepared by the IGGE, represent an important addition and comprise a range of matrix types, including a soil, stream sediment, Mg-rich ultramafic rock, Fe-rich ultramafic rock, platinoid ore depleted in Cu, Ni and Fe, and a chromitite. The concentration of PGE in these samples ranges over 4-5 orders of magnitude and the samples were shown to have good homogeneity as assessed by a variance test. Analytical methods based on different principles were used in sample certification, including several fire assay and wet chemical procedures used for decomposition and preconcentration. Certified values for the elements Pt, Pd, Os, Ru, Ir, Rh and Au were determined by AAS, catalytic colourimetry (COL), catalytic polarography (POL), atomic emission spectrometry (AES), ICP-MS and NAA. Recently, the GPt1-7 samples were approved as national primary CRMs by the State Bureau of Technical Supervision of China.     

环境水土对重要建筑材料的腐蚀作用

从建筑材料和水土中活跃成分的化学性质出发,讨论环境水土成分对重要建筑材料的腐蚀的机理及其评价的有关问题。     

用SAVQ技术实现太阳射电频谱的数据压缩

对自适应矢量量化（SAVQ）技术在太阳射电频谱数据压缩中的应用进行了有意义的讨论．给出一种压缩比和失真可调的SAVQ压缩方法,指出提高数据压缩比的有效方法之一为样本集成,同时介绍了用该技术对北京天文台太阳射电频谱仪上的两个波段（1．0GHz－2．0GHz和2．6GHz－3．8GHz）的观测数据进行压缩的实用效果,并与国际同行所用的ICON方式进行性能比较．最后展示了数据压缩技术及其在天文上的应用．     

Thymol as a Biocide in Japanese Rainwater

Rainwater samples (wet-only; event samples) collected in Niigata in late autumn 1996 and springtime 1997 were used to assess the effectiveness of thymol as a biocide in Japanese rainwater. Upon collection each rainwater sample was divided into sub-samples, with thymol added to one sub-sample. Sub-samples with and without thymol were shipped to CSIRO, Australia, for chemical analysis. Comparison of analytical results for each pair of sub-samples proved the effectiveness of thymol in preventing biological action in this region where effects of rainwater microflaura and fauna on rainwater composition have not before been studied. Sub-samples without thymol exhibited lowered electrical conductivity, loss of the cations H⁺ and NH ₄ ^- , and loss of the anions HCOO^-, CH₃COO^-, C₂O ₄ ^2- , CH₃SO ₃ ^- and PO ₄ ^3- . Nitrate showed no change in all but one of the samples, indicating that ammonia was the preferred source of nitrogen for the biological processes that consumed the rainwater organic acids and phosphate. These results suggest that thymol is a suitable rainwater biocide for use under Japanese conditions.     

Experimental study and constitutive modelling of elasto‐plastic damage in heat‐treated mortar

This study investigates the effect of a heat‐treatment upon the thermo‐mechanical behaviour of a model cement‐based material, i.e. a normalized mortar, with a (w/c) ratio of 0.5. First, a whole set of varied experimental results is provided, in order to either identify or validate a thermo‐mechanical constitutive model, presented in the second paper part. Experimental responses of both hydraulic and mechanical behaviour are given after different heating/cooling cycling levels (105, 200, 300, 400^°C). The reference state, used for comparison purposes, is taken after mass stabilization at 60^°C. Typical uniaxial compression tests are provided, and original triaxial deviatoric compressive test responses are also given. Hydraulic behaviour is identified simultaneously to triaxial deviatoric compressive loading through gas permeability K_gas assessment. K_gas is well correlated with volumetric strain evolution: gas permeability increases hugely when ε_v testifies of a dilatant material behaviour, instead of contractile from the test start. Finally, the thermo‐mechanical model, based on a thermodynamics approach, is identified using the experimental results on uniaxial and triaxial deviatoric compression. It is also positively validated at residual state for triaxial deviatoric compression, but also by using a different stress path in lateral extension, which is at the origin of noticeable plasticity. Copyright © 2009 John Wiley & Sons, Ltd.