Petroleum Hydrocarbon Distribution Features in Water and Sediment off Fujian Shore

This study on the distribution features of petroleum hydrocarbon in water and sedi-ment off the Fujian shore using data obtained from the baseline research on oceanic contamination in Fujian showed that:during the research preiod,petroleum hydrocarbon concentrations in water varied from 5.77μg/L to 37.28μg/L,averaged 14.48 μg/L;was lower in the wet seasson than in the dry season;and was highest in the Minjiang Estuary and Jiulong Estuary in both seasons ,The petorleum hydrocarbon concentrations in shore sediment varied from 14.48 mg/kg to 784.36 mg/kg,averaged 133.3 mg/kg ,and was closely related to sediment types (granularity).     

澳门附近海域沉积物污染状况及特征分析

掌握澳门附近海域沉积物的污染状况及特征,对于合理安排澳门海洋海岸工程疏浚泥的海洋倾倒,防止造成海洋污染有十分重要的意义。根据1997—1999年连续三年对澳门附近主要区域的海洋沉积物采样测定结果,通过分析认为澳门附近海域沉积物污染具有下列特征:1)沉积物中重金属和油类含量普遍较高,除了总Hg外均高于珠江口海区的其他港口;2)沉积物中污染物的分布受人类活动的影响明显,澳门内港受船只排污、码头作业、陆地工业和生活污水排放的影响,是澳门附近海域沉积物污染最为严重区域;3)受水质交换的影响明显,澳门外港、路环岛东北等区域受珠江径流影响水质交换较快,沉积物中污染物的含量较低,而内港由于水质交换较差,沉积物中污染物的含量相对较高;4)与沉积物的成分组成(吸附)有关,大部分污染物与沉积物中粉砂有较好的相关性,表明粉砂对污染物质有较广泛性的吸附能力,尤其是Cu、Zn、Cd、油类、有机质。     

MONITORING THE DIFFUSION OF SUSPENDED SEDIMENTS AND STABILITY OF TIDAL RADIAL SAND RIDGES AREA USING MULTI-SATELLITE REMOTE SENSING DATA

Nine Landsat TM tapes and images and MSS images, 10 NOAA tapes and images and 1 SAR image from 1973 to 1997 were used to analyse the diffusion of suspended sediments and the change of tidal radial sand ridges in the northern part of the Changjiang River delta, the South Yellow Sea. The results showed that the diffusion of suspended sediments was controlled by the tide, net current, and submarine topography in this area. The distribution of suspended sediments had close relationship with thesubmarine topography. The old Huanghe River delta and the Changjiang River comprise the main sediment supply for the formation of radial sand ridges, whose evolution can be divided into three stages since the Huangbe River changed its course and flowed northward into the Bohai Sea.     

Characteristics of Light Transmission in Summer and Winter and Its Relation to Sediment Transport in the East China Sea

INTRODUCTIONTheSubeiShoalandtheChangjiangRiverestuarineareainthewestoftheHuanghaiandEastChinaSeasisoneofthemarginalseasintheworld ,wheresuspendedmatterisextremelyhigh .Here ,notonlyistheretheTaiwanWarmCurrentoneoftheKuroshio’sbranchesintheEastChinaSea,butalsotheHuanghaiCoastalCurrent,andChangjiangDilutedWater.Sothestrongmixingbetweenthecoastalandoffshorewaterscomplicatessuspendedmatterdistributioninthisarea.HowthesuspendedmatterdischargedfromtheChangjiangRiverandtheabandonedHuan…     

Sediment transport in analogue flume models compared with real‐world sedimentary systems: a new look at scaling evolution of sedimentary systems in a flume

Evolution of sedimentary systems at large temporal and spatial scales cannot be scaled down to laboratory dimensions by conventional hydraulic Froude scaling. Therefore, many researchers question the validity of experiments aiming to simulate this evolution. Yet, it has been shown that laboratory experiments yield stratigraphic responses to allocyclic forcing that are remarkably similar to those in real‐world prototypes, hinting at scale independency with strong dependence on boundary conditions but weak dependence on the actual sediment transport dynamics. This paper addresses the dilemma by contrasting sediment transport rules that apply in the laboratory with those that apply in real‐world geological systems. It is demonstrated that the generation of two‐dimensional stratigraphy in a flume can be simulated numerically by the non‐linear diffusion equation. Sediment transport theory is used to demonstrate that only suspension‐dominated meandering rivers should be simulated with linear diffusion. With increasing grain‐size (coarse sand to gravel) and shallowness of river systems, the prediction of long‐term transport must be simulated by non‐linear, slope‐dependent diffusion to allow for increasing transport rates and thus change in stratigraphic style. To point out these differences in stratigraphic style, three stages in infill of accommodation have been defined here: (i) a start‐up stage, when the system is prograding to base level (e.g. the shelf edge) with no sediment flux beyond the base‐level point; (ii) a fill‐up stage, when the system is further aggrading while progressively more sediment is bypassing base level with the progression of the infill; and (iii) a keep‐up stage, when more than 90% of the input is bypassing the base level and less than 10% is used for filling the accommodation. By plotting the rate of change in flux for various degrees of non‐linearity (varying the exponent in the diffusion equation) it was found that the error between model and real‐world prototype is largest for the suspension‐dominated prototypes, although never more than 30% and only at the beginning of the fill‐up stage. The error reduces to only 10% for the non‐linear sandy‐gravelly and gravelly systems. These results are very encouraging and open up ways to calibrate numerical models of sedimentary system evolution by such experiments.     

Discriminating between pore‐filling load and bed‐structure load: a new porosity‐based method,exemplified for the river Rhine

Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (D_c,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (D_c,w), irrespective of the method used to determine D_c,p or D_c,w. D_c,w values are in the order of 10^?1 mm and mainly dependent on the flow characteristics, whereas D_c,p values are generally much larger (about 10⁰ mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of D_c,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of D_c,p helps to improve morphological predictions, especially if spatial variations in D_c,p are taken into account. An alternative to using a spatially variable value of D_c,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity.     

新疆境内塔拉斯 费尔干纳断裂早侏罗世走滑的古地震证据

在野外考察过程中,于新疆乌恰地区早侏罗世康苏组沼泽相砂岩层中,发现并识别出软沉积物液化变形层,变形包括负载构造,球枕构造及卷曲变形构造。通过模拟试验的对比研究认为,该软沉积物变形机制与液化作用有关,触发沉积物液化的动力是古地震,并且根据地震震级与液化最大震中距的关系,推测出造成早侏罗世软沉积物变形的里氏地震震级为6相似文献   

Natural radioactivity in sediment of Wei River,China

The concentrations of natural radionuclides in sediment of Wei River of China were measured using γ-ray spectrometry with the aim of estimating the radiation hazard as establishing a database for radioactivity levels of river sediment of China. The activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in sediment samples ranged from 10.4 to 39.9 Bq kg⁻¹, 15.3 to 54.8 Bq kg⁻¹ and 514.8 to 1,175.5 Bq kg⁻¹, respectively. The concentrations of these radionuclides were compared with the typical world values and the average activities of Chinese soil and Shaanxi soil. Radium equivalent activity (Ra_eq), external hazard index (H _ex) and representative level index (I _γr) were calculated for the samples to assess the radiation hazards arising due to the use of these sediment samples in the construction of dwellings. All the sediment samples have Ra_eq lower than the limit of 370 Bq kg⁻¹, H _ex less than unity and I _γr close to 1 Bq kg⁻¹. The overall mean outdoor terrestrial gamma dose rate is 64.8 nGy h⁻¹ and the corresponding outdoor annual effective dose is 0.079 mSv. None of the studied location is considered a radiological risk and sediment can be safely used in construction.     

粗颗粒悬移质测验误差分析

本文根据流速与含沙量分布,研究了悬移质积点法对粗颗粒含沙量测验误差.首先指出无论从输沙率还是从悬浮高度看,粗颗粒悬移质集中于河底,致使水文测验中的一些测验方法(如一点法、二点法、三点法等)带有较大的误差.进而分析了各种测法对粗颗粒的相对误差,并且随着颗粒变粗,误差愈来愈大,以致不能接受.这种情况在水库下游河道冲刷过程中,会在一定程度上出现,必须重视研究和调整测验方法.最后通过与长江委水文局在沙市及监利两水文站试验结果对比,证明本文理论上的分析是可信的.     

川西前陆盆地中—新生代沉积迁移与构造转换

川西前陆盆地中—新生代各构造层的残余厚度展布和沉积特征分析发现,四川克拉通周缘的前陆盆地在晚三叠世时期发育于龙门山山前,明显属于龙门山褶皱逆冲构造载荷所形成的前渊凹陷;侏罗纪早期的沉积地层呈面状分布,没有表现出显著的挠曲沉降,指示了一个构造相对平静的阶段;中侏罗世早期前渊凹陷迁移至龙门山北段和米仓山山前,前渊沉积从晚三叠世的北东向转换为近东西向,广泛的湖泊相沉积预示了前陆盆地的欠充填状态;中侏罗世中晚期,川西盆地沉降中心又迁移到大巴山山前,相应的挠曲变形又从近东西向转化为北西向,构成了大巴山的前渊凹陷;晚侏罗世—早白垩世时期,沉降中心再次回到米仓山山前,巨厚的前渊凹陷沉积指示了米仓山冲断带的主要活动时期;白垩纪末—古近纪的前渊凹陷则跃迁至雅安—名山地区。川西前陆盆地的同造山沉降中心以四川盆地中心为核心在西部和北部呈弧形迁移,沉积序列不断更替和叠加。中生界各构造层底界构造图显示现今的构造低部位位于川西北地区和川西南地区,在川西北地区均有东西走向的等值线分布,而川西南地区等值线走向则为北东-南西向。因此分析认为,晚侏罗世至早白垩世的构造变形可能控制了川西盆地现今的地层变形,形成了川西北地区的南北向构造挤压结构,而晚期的新生代构造变形则主要体现在川西盆地的西南部,形成北东-南西向的地层展布特征。