Late Cenozoic Sedimentary Evolution of Pagri‐Duoqing Co graben,Southern End of Yadong‐Gulu Rift,Southern Tibet

The north trending rifts in southern Tibet represent the E–W extension of the plateau and confirming the initial rifting age is key to the study of mechanics of these rifts. Pagri–Duoqing Co graben is located at southern end of Yadong–Gulu rift, where the late Cenozoic sediments is predominately composed of fluvio-lacustrine and moraine. Based on the sedimentary composition and structures, the fluvio-lacustrine could be divided into three facies, namely, lacustrine, lacustrine fan delta and alluvial fan. The presence of paleo-currents and conglomerate components and the provenance of the strata around the graben indicate that it was Tethys Himalaya and High Himalaya. Electron spin resonance (ESR) dating and paleo-magnetic dating suggest that the age of the strata ranges from ca. 1.2 Ma to ca. 8 Ma. Optically stimulated luminescence (OSL) dating showed that moraine in the graben mainly developed from around 181–109 ka (late Middle Pleistocene). Combining previous data about the Late Cenozoic strata in other basins, it is suggested that 8–15 Ma may be the initial rifting time. Together with sediment distribution and drainage system, the sedimentary evolution of Pagri could be divided into four stages. The graben rifted at around 15–8 Ma due to the eastern graben-boundary fault resulting in the appearance of a paleolake. Following by a geologically quiet period about 8–2.5 Ma, the paleolake expanded from east to west at around 8–6 Ma reaching its maximum at ca. 6 Ma. Then, the graben was broken at about 2.5 Ma. At last, the development of the glacier separated the graben into two parts that were Pagri and Duoqing Co since the later stages of the Middle Pleistocene. The evolution process suggested that the former three stages were related to the tectonic movement, which determined the basement of the graben, while the last stage may have been influenced by glacial activity caused by climate change.     

柴达木盆地西北缘石英闪长岩的形成时代、岩石成因及地质意义

柴达木盆地西北缘石英闪长岩Al2O3含量较高,全碱(Alk)含量较低,Na2OK2O,铝饱和指数A/CNK为0.87~0.91,属钙碱性准铝质岩石系列。球粒陨石标准化的稀土元素配分曲线表现为轻稀土元素富集型,轻、重稀土元素分馏明显,Eu弱负异常;微量元素地球化学特征显示,岩石富集Rb、Th、U等大离子亲石元素,亏损Nb、Ta、P、Ti等高场强元素,Nb/La和Rb/Nb比值较低,具有I型花岗岩的特征。石英闪长岩Ca O/Na2O比值较高(2.32~2.64),结合源岩判别图解综合推断其源于变玄武岩的部分熔融。全岩Zr饱和温度计算结果显示初始岩浆温度768℃;岩石地球化学特征表明岩浆源区压力1.5 Ga,源岩部分熔融的残留相可能为石榴子石+角闪石+金红石。经过锆石阴极发光分析和MC-LA-ICP-MS锆石U-Pb测年,获得206Pb/238Pb加权平均年龄为252±1 Ma,代表了柴达木盆地西北缘石英闪长岩的成岩年龄。结合区域地质演化特征,认为该岩体形成于与板块俯冲有关的火山弧构造环境,是晚二叠世末期宗务隆洋壳向柴北缘欧龙布鲁克地块俯冲,变玄武岩在相对较高的温压条件下发生部分熔融形成的。     

桂东南永安岩体锆石U-Pb测年、Hf同位素特征及其地质意义

永安岩体位于钦杭结合带南部,属桂东南十万大山-大容山复式岩体的一部分,其岩石类型为斑状堇青黑云花岗闪长岩。对永安岩体斑状堇青黑云花岗闪长岩进行了LA-ICPMS锆石U-Pb测年,获得其年龄为252. 8±3. 3Ma,为晚二叠世花岗岩。对永安岩体花岗岩进行的全岩地球化学分析结果表明,岩石富Al、高K,铝饱和指数A/CNK均大于1. 1,标准矿物分子刚玉均大于1%;岩石富集轻稀土元素,亏损重稀土元素,轻重稀土元素分馏明显,稀土元素的球粒陨石标准化配分曲线为轻稀土元素富集的右倾型,具弱负铕异常;岩石富集大离子亲石元素(Rb、Ba、K、Sr),亏损高场强元素(Nb、P、Ti、Ta)和Ba、Sr。花岗岩的锆石εHf(t)=-14～-8,tDM2=2. 3～1. 8 Ga。通过本文工作,结合前人关于永安岩体矿物学、全岩地球化学、Hf同位素和锆石微量元素的分析资料,认为永安岩体岩石为强过铝质S型壳源花岗岩,地幔组分没有提供成岩物质,但地幔底侵作用为成岩提供了热能,花岗岩形成于后碰撞阶段的拉张环境中。     

内蒙古西乌旗罕乌拉地区下二叠统寿山沟组碎屑锆石LA-ICP-MS U-Pb年龄及其地质意义

中亚造山带南缘二叠纪的构造背景一直存在争议。以内蒙古西乌旗罕乌拉地区发育的寿山沟组为研究对象,开展了野外地质、岩石学、碎屑锆石LA-ICP-MS U-Pb年龄研究。2个样品锆石阴极发光图像和Th/U值指示,锆石为岩浆成因锆石。103颗碎屑锆石年龄测试结果显示,年龄信息可划分为5组:285~328Ma,峰期年龄302Ma;338~361Ma;455~490Ma;757Ma;1278Ma、2380Ma。最年轻的年龄为285Ma,结合侵入其中的花岗岩同位素年龄,指示西乌旗罕乌拉地区寿山沟组沉积时限介于285~280Ma之间,主体沉积时代应为早二叠世Sakmarian期—Artinskian期。寿山沟组碎屑锆石反映出近源、快速沉积的特点,沉积物源中含有较多的火山碎屑物,可能代表弧后盆地沉积,为早二叠世古亚洲洋闭合前洋壳俯冲消减作用的沉积响应。结合区域资料,寿山沟组碎屑锆石的年龄对应于东北地区的变质基底及其后的构造岩浆事件,物源区物质主要来自于苏尼特左旗—锡林浩特—西乌旗一带早石炭世末—晚石炭世岩浆弧及贺根山—东乌旗一带,并进一步限制了华北与西伯利亚两大板块的缝合线应位于寿山沟组发育地区的南部,即索伦缝合带,拼合时代最可能为晚二叠世—早三叠世。     

大兴安岭伊勒呼里山早白垩世碱长花岗岩年龄、地球化学特征及其地质意义

对大兴安岭伊勒呼里山早白垩世碱长花岗岩进行了岩相学、地球化学、LA-ICP-MS锆石U-Pb定年研究。伊勒呼里山地区碱长花岗岩主量元素具有富Si、富碱,贫Mg、Ca的特征;微量元素亏损Sr、P、Eu、Ti,富集K、Rb、Th等不相容元素,元素地球化学特征表明,岩体为铝质A型花岗岩(A/CNK=0.88~1.21,A/NK=0.94~1.49)。测年结果显示,粗中粒碱长花岗岩的锆石年龄为140.3±1.0Ma,细中粒碱长花岗岩锆石年龄为137.9±0.8Ma,均形成于早白垩世。结合区域研究资料,伊勒呼里山地区碱长花岗岩岩体的形成与蒙古-鄂霍茨克洋闭合后的岩石圈伸展密切相关,其岩浆源区可能为地壳物质的部分熔融。     

大兴安岭十八站—韩家园地区晚中生代火山岩年龄、地球化学特征及其构造意义

大兴安岭十八站—韩家园地区发育晚中生代基性-中酸性火山岩。选取粗面安山岩、粗面岩、流纹岩进行年代学和岩石地球化学研究。粗面安山岩LA-ICP-MS锆石U-Pb年龄为125.2±0.9 Ma,为早白垩世火山作用的产物。岩石地球化学特征表明,中酸性火山岩属于高钾钙碱性-钾玄岩系列。岩石稀土元素总量∑REE=121.42×10~(-6)~154.43×10~(-6),轻、重稀土元素分异明显(La/Yb)_N=19.25~31.98,在稀土元素配分图上显示右倾型,除一个流纹岩样品具显著负Eu异常外,多数样品无明显Eu负异常(δEu=0.45~0.90)。岩石具弱富集大离子亲石元素Ba、Sr,明显亏损高场强元素Nb、Ta、Ti的特征。结合区域资料,认为十八站—韩家园地区早白垩世中酸性火山岩形成于蒙古-鄂霍茨克洋闭合机制下后碰撞伸展背景。粗面安山岩、粗面岩和流纹岩系同源岩浆部分熔融与结晶分异作用的结果,岩浆来源于受俯冲流体交代的富集岩石圈地幔。     

滇西勐库地区退变质榴辉岩锆石U-Pb年龄及其地质意义

滇西双江县勐库地区退变质榴辉岩呈构造透镜体产于湾河蛇绿混杂岩带内,该发现弥补了东特提斯造山带高压-超高压变质岩在云南境内的空缺。在岩石学观察的基础上,借助激光剥蚀等离子体质谱(LA-ICP-MS)技术,对退变质榴辉岩中的锆石开展了精确的U-Pb年龄测定。所测试的3件样品分别采自3个不同的露头:样品PM011-9-1采自勐库控角剖面,样品PM038-15-4采自勐库地界剖面,样品GH1612-1-1采自勐库根恨大寨。测年结果显示,样品PM011-9-1的23个测点中存在2组较集中的~(206)Pb/~(238)U年龄,分别为801.0±9.8Ma和227.0±12Ma;样品PM038-15-4的26个测点中存在2组较集中的~(206)Pb/~(238)U年龄,分别为447.5±3.6Ma和291.7±6.3Ma;样品GH1612-1-1的30个测点中存在一组较集中的~(206)Pb/~(238)U年龄,为229.0±1.3Ma。结合区域资料及锆石阴极发光图像分析,801.0±9.8Ma应属退变质榴辉岩的原岩年龄,可能代表了Rodinia超大陆裂解早期出现的初始洋壳;而447.5±3.6Ma、291.7±6.3Ma和229.0±1.3～227.0±12Ma这3组年龄可能代表了退变质榴辉岩经历的3期变质作用年龄:分别为峰期硬柱石榴辉岩相的变质作用;中期角闪石榴辉岩相-高压麻粒岩相的退变质作用,为一个降压-增温的"热折返"过程;主期角闪岩相的退变质作用,是一个大幅度的降温-减压过程,奠定了勐库地区退变质榴辉岩的主体面貌。     

滇西云县地区团梁子岩组变质岩锆石U-Pb年龄及其构造意义

滇西云县—景洪一带广泛出露的中元古界团梁子岩组是一套与扬子基底岩系密切相关的中低变质沉积岩夹火山岩系,其形成时代、沉积充填序列及大地构造属性一直存在争议。出露于云县漫湾地区的团梁子岩组发育厚数米的绿片岩(原岩玄武岩)及绢云石英千枚岩(原岩流纹岩)。采集绢云石英千枚岩样品进行LA-ICP-MS锆石U-Pb定年,分别获得1497±14Ma的岩浆结晶年龄和893±17.3Ma、425±15.7Ma、321±27Ma的变质年龄。认为团梁子岩组中以绿片岩、绢云石英千枚岩为主体的原始沉积岩系形成于中元古代中期,在新元古代全球性的格林威尔造山过程中被青白口纪花岗岩侵入并发生变质作用;在古特提斯洋俯冲过程中,经历古生代造弧作用;同时还获单颗粒2310±15Ma的碎屑锆石,推测滇西云县地区应存在古元古代的结晶基底,由此可知,团梁子岩组应是扬子陆块褶皱基底岩系的组成部分。     

滇东南富宁地区基性侵入岩及喷出岩时代

在滇东南富宁地区基性侵入岩、喷出岩较发育,前人将其划分为"半瓦型"侵入岩、"安定型"侵入岩和"龙康型"喷出岩3类,3类岩石普遍缺乏可靠的同位素年代学资料。在对富宁地区基性侵入岩、喷出岩进行区域地质调查的基础上,应用LAICP-MS技术对其进行锆石U-Pb测年,在半瓦型侵入岩和安定型侵入岩中分别获得了254.0±2.0Ma和244.2±4.4Ma的加权平均年龄,在龙康型喷出岩中获得251.9±3.0Ma和255.92±0.72Ma加权平均年龄。结合野外调查和综合研究,将富宁地区"安定型"侵入岩的时代界定于中三叠世,将"半瓦型"侵入岩和"龙康型"喷出岩的时代界定于晚二叠世。     

High-reliability zircon separation for hunting the oldest material on Earth: An automatic zircon separator with image-processing/microtweezers-manipulating system and double-step dating

Despite the recent development in radiometric dating of numerous zircons by LA-ICPMS, mineral separation still remains a major obstacle, particularly in the search for the oldest material on Earth. To improve the efficiency in zircon separation by an order of magnitude, we have designed/developed a new machine-an automatic zircon separator(AZS). This is designed particularly for automatic pick-up of100 μm-sized zircon grains out of a heavy mineral fraction after conventional separation procedures. The AZS operates in three modes:(1) image processing to choose targeted individual zircon grains out of all heavy minerals spread on a tray,(2) automatic capturing of the individual zircon grains with microtweezers, and(3) placing them one-by-one in a coordinated alignment on a receiving tray. The automatic capturing was designed/created for continuous mineral selecting without human presence for many hours. This software also enables the registration of each separated zircon grain for dating, by recording digital photo-image, optical(color) indices, and coordinates on a receiving tray. We developed two new approaches for the dating; i.e.(1) direct dating of zircons selected by LA-ICPMS without conventional resin-mounting/polishing,(2) high speed U-Pb dating, combined with conventional sample preparation procedures using the new equipment with multiple-ion counting detectors(LA-MIC-ICPMS).With the first approach, Pb-Pb ages obtained from the surface of a mineral were crosschecked with the interior of the same grain after resin-mounting/polishing. With the second approach, the amount of time required for dating one zircon grain is ca. 20 s, and a sample throughput of 150 grains per hour can be achieved with sufficient precision(ca. 0.5%).We tested the practical efficiency of the AZS, by analyzing an Archean Jack Hills conglomerate in Western Australia with the known oldest(4.3 Ga) zircon on Earth. Preliminary results are positive; we were able to obtain more than 194 zircons that are over 4.0 Ga out of ca. 3800 checked grains, and 9 grains were over 4300 Ma with the oldest at 4371 ± 7 Ma. This separation system by AZS, combined with the new approaches, guarantees much higher yield in the hunt for old zircons.