郯庐断裂带中桃源韧性剪切带剪切温压条件及锆石U-Pb分析

郯庐断裂带西侧的桃源韧性剪切带位于合肥市肥东县浮槎山的东麓,是郯庐断裂带的重要组成部分。左旋平移现象十分经典,走向北北东,垂直于大别造山带展布,带内大量发育高温糜棱岩。综合剪切带内基质的矿物组合、变形机制及电子探针分析结果,本文得出该韧性剪切带的变形温度为550~650℃,压力在0.5GPa左右,属高温中压变质环境,剪切深度大概在20km左右,后期抬升至地表。剪切带内不同岩石分别给出了~0.8Ga、~2.0Ga、~2.5Ga的锆石U-Pb基底年龄。推断0.8Ga和2.0Ga年龄具有华南板块的特征,而2.5Ga年龄岩石兼具有华南和华北板块的属性,仍无法判断其具体来自哪个板块。此外,剪切带内发育的同构造弱变形伟晶岩脉测得年龄为129Ma,指示郯庐断裂带肥东段在129Ma仍在进行左行剪切活动,但剪切强度已大幅衰减。     

玉龙斑岩铜矿带南段含矿斑岩体锆石U-Pb年龄、地球化学特征及南北段成矿规模差异分析

藏东缘玉龙斑岩铜矿带是中国重要的产于碰撞造山环境下的斑岩铜矿带,其全长约300千米,主要由1个超大型、2个大型、2个中型斑岩铜矿床及一系列斑岩型矿床(点)组成。玉龙斑岩铜矿带大规模矿化主要位于矿带北段,南段矿化规模相对较小,目前发现的多为小型矿床(点)。为了深入了解玉龙斑岩铜矿带时空演化及南北段矿化规模差异的控制因素,本文分析了玉龙斑岩铜矿带南段色礼、马牧普和总郭这3个矿化点矿化斑岩体锆石LA-ICP-MS U-Pb年龄、地球化学组成及色礼矿化斑岩体锆石Hf同位素。色礼、马牧普和总郭含矿斑岩分别为二长花岗斑岩、正长斑岩及石英二长斑岩,三者锆石LAICP-MS U-Pb年龄分别为39.4±0.2Ma(MSWD=1.10)、38.5±0.3Ma(MSWD=1.79)和39.4±0.2Ma(MSWD=1.05)。矿化斑岩体为偏铝质,具有富碱、高钾(K_2O/Na_2O=1.2~2.4)、富集大离子亲石元素和轻稀土元素,亏损高场强元素,弱Eu负异常特征。3个矿化斑岩具有较高的Sr/Y比值,且都发育角闪石斑晶,呈现富水岩浆特征。色礼二长花岗斑岩的锆石εHf(t)为-2.7~2.8,平均值为-0.4,显示壳幔混合源区特征,并且其明显小于玉龙斑岩铜矿带北段玉龙超大型斑岩铜矿床含矿斑岩体锆石εHf(t)值(4.2)。玉龙斑岩铜矿带南北段含矿斑岩体形成时代相近,都形成于碰撞造山走滑构造背景。玉龙超大型矿床矿化斑岩锆石εHf(t)值明显大于色礼矿化点斑岩体锆石εHf(t)的值,表明矿床规模和岩浆源区物质含幔源物质多少有关,更多亏损地幔物质或新生地壳物质的加入更有利于形成大型斑岩矿床。玉龙斑岩铜矿带南北段成矿规模差异可能为北段斑岩体含更多地幔或新生地壳物质所致。     

华北板块北缘呼兰群~(40)Ar-~(39)Ar定年及其构造意义

呼兰群发育于华北板块北缘,主要为一系列长英质火山岩和沉积岩组成的受到低绿片岩相-角闪岩相变质作用和多期变形作用改造的变质岩系,分布于吉林中部红旗岭-呼兰镇一带。大部分地区的呼兰群地层层序被严重破坏,野外观察的"层理"实际上是构造置换作用形成的构造面理,绝大多数的岩性界面为构造接触。呼兰群由一系列相互叠置的构造岩片构成,具有构造混杂岩性质。呼兰群经历了两期韧性变形作用:早期受到NNE-SSW向挤压作用,呼兰群表现为由NNE向SSW逆冲的运动学特征;晚期可能受到NE-SW向伸展作用,主要表现为由SW向NE倾向滑移的运动学特征。本次分别对采自红旗岭地区强变形带的白云石英片岩、石榴白云片岩中的白云母进行40Ar-39Ar测年,分别获得220.23±2.15Ma、221.31±2.6Ma的坪年龄,认为~220Ma年龄应代表华北板块北缘碰撞造山带造山后伸展作用发生的时间。     

云岗盆地晚中生代沉积-火山充填序列及其构造意义

利用凝灰岩夹层及安山岩的锆石U-Pb同位素测年,对云岗盆地晚中生代地层充填序列的关键时限进行了限定。结合地层接触关系、安山岩的地球化学特征,分析了重点地质界面的构造意义。取得了以下主要认识:(1)早中侏罗世,盆地为一套湖进序列的连续沉积,以大同组含煤地层为代表,暗示着区域拉张的构造背景;(2)盆地整体缺失了晚侏罗世(160.4±1.1)Ma至早白垩世(130.1±0.7)Ma的沉积地层,其发生的动力学背景可能与古太平洋、西伯利亚、特提斯同时向东亚大陆汇聚产生的远程效应有关;(3)旧高山安山岩形成于早白垩世(130.1±0.7)Ma大陆板内裂谷的构造背景,与华北克拉通破坏的动力学背景紧密相关。研究成果对旧高山安山岩时代归属提出了新的认识,并不归属于上侏罗统髫髻山组,而相当于下白垩统张家口组。     

Age and growth of redeye round herring Etrumeus whiteheadi off the South African coast

Ages of redeye round herring Etrumeus whiteheadi were estimated with associated errors and used to infer life-history information, such as age composition, age-at-maturity and instantaneous mortality rate. Samples were collected in November 2005 during a research survey aimed at estimating the biomass of spawning pelagic fish off South Africa’s west and south coasts. Replicate age estimates obtained from sagittal otoliths were collected with slight bias and relatively high precision. A von Bertalanffy model describing growth of the combined sexes, including juveniles, was L_t = 20.41(1 ? e^{?0.41(t ? 1.92)}). Kimura’s likelihood ratio test revealed no statistically significant differences between growth parameters of males and females. Results suggested that otolith length is a better predictor of age than otolith weight. Maturity estimates for E. whiteheadi were similar to those previously documented.     

青海鄂拉山北段牦牛沟铜金矿辉钼矿Re-Os年龄及其地质意义

鄂拉山是中央造山带西段之东昆仑和西秦岭的结合部位,由于研究程度不高而影响着大家对其区域印支期成矿作用、成矿地质背景及地球动力学过程的认识。因此,本文从特定矿床类型时空分布特征反演成矿地质背景和地球动力学过程的方法入手,以鄂拉山北段的牦牛沟铜金矿为研究对象,详细研究其矿床地质特征和成矿年代学,将其与区域东昆仑典型斑岩-矽卡岩型矿床进行时空对比研究,并结合传统区域大地构造研究和成岩证据,试图探讨区域成矿地质背景、地球动力学过程以及鄂拉山的归属问题。结果表明,牦牛沟铜金成矿为小型矽卡岩矿床,成矿与木勒儿花岗闪长岩关系密切。与铜金成矿有关的矿化主要为硅化、绢云母化、黄铜矿化和黄铁矿化。矿床矿石矿物有黄铜矿、黄铁矿以及辉钼矿等。首次获得有意义的辉钼矿Re-Os加权平均年龄为(238.7±1.4)Ma。同时,三叠纪鄂拉山与东昆仑具有相似的地质演化特征,属于东昆仑南北向挤压构造背景下的成矿事件。东昆仑三叠纪成矿可能有两个相对峰期:约237 Ma以矽卡岩矿床为主的铁铜成矿期和约222 Ma的以斑岩为主的铜金成矿期,前者可能和俯冲碰撞转换期的板块断离有关,后者则与后碰撞拆沉背景有关。     

SCHMIDT‐HAMMER EXPOSURE AGES FROM PERIGLACIAL PATTERNED GROUND (SORTED CIRCLES) IN JOTUNHEIMEN,NORWAY, AND THEIR INTERPRETATIVE PROBLEMS

Periglacial patterned ground (sorted circles and polygons) along an altitudinal profile at Juvflya in central Jotunheimen, southern Norway, is investigated using Schmidt‐hammer exposure‐age dating (SHD). The patterned ground surfaces exhibit R‐value distributions with platycurtic modes, broad plateaus, narrow tails, and a negative skew. Sample sites located between 1500 and 1925 m a.s.l. indicate a distinct altitudinal gradient of increasing mean R‐values towards higher altitudes interpreted as a chronological function. An established regional SHD calibration curve for Jotunheimen yielded mean boulder exposure ages in the range 6910 ± 510 to 8240 ± 495 years ago. These SHD ages are indicative of the timing of patterned ground formation, representing minimum ages for active boulder upfreezing and maximum ages for the stabilization of boulders in the encircling gutters. Despite uncertainties associated with the calibration curve and the age distribution of the boulders, the early‐Holocene age of the patterned ground surfaces, the apparent cessation of major activity during the Holocene Thermal Maximum (HTM) and continuing lack of late‐Holocene activity clarify existing understanding of the process dynamics and palaeoclimatic significance of large‐scale sorted patterned ground as an indicator of a permafrost environment. The interpretation of SHD ages from patterned ground surfaces remains challenging, however, owing to their diachronous nature, the potential for a complex history of formation, and the influence of local, non‐climatic factors.     

广东三水Ⅱ级河流阶地的孢粉与环境初探

据广东三水左田村Ⅱ级河流阶地的样品分析，发现孢子花粉５７种（科、属），其中蕨类植物孢子占孢粉总数的５７．５％，木本植物花粉占３５．４％，草本植物花粉占７．１％。样品中还含沟鞭藻和疑源类化石。Ⅱ级河流阶地形成于中更新世，是河流作用的结果，但受到海水的影响。大约在距今３０—４０×１０４ａ时，该区植物群以热带、亚热带植物为主，属亚热带常绿季雨林。可能因间冰期全球气候转暖，海平面上升导致海水沿珠江上溯而使该区受到影响。     

Comparison of Ocean Surface Wind Stress Computed with Different Parameterization Functions of the Drag Coefficient

Depending on the choice of reference wind speed, the quantitative and qualitative properties of the drag coefficient may vary. On the ocean surface, surface waves are the physical roughness at the air-sea interface, and they play an important role in controlling the air-sea exchange processes. The degree of dynamic influence of surface waves scales with wavelength. Drag coefficient computed with the reference wind speed at an elevation proportional to the wavelength (for example, U _λ/2) is fundamentally different from the drag coefficient computed with the wind speed at fixed 10 m elevation (U ₁₀). A comparison has been carried out to quantify the difference in wind stress computation using several different parameterization functions of the drag coefficient. The result indicates that the wind stress computed from U ₁₀ input using a drag coefficient referenced to U _λ/2 is more accurate than that computed with drag coefficient functions referenced to U ₁₀.