Crater formation in soils by raindrop impact

The process of crater formation by the impact of water drops on soil, sand and various other target material was studied. Craters of various shapes and sizes were observed on different target materials or conditions, ranging from circumferential depression to completely hemispherical shape. Crater shape was dependent upon target material, its ?ow stress or shear strength and the presence and thickness of water on the surface. Between 5 and 22 per cent of impact energy was spent on cratering, but the relationship between crater volume and kinetic energy of a raindrop was curvilinear, indicating a lower ef?ciency of impact energy in removing target material as the energy increases. Impact impulse, on the other hand, showed a more linear relationship with crater volume, and the ratio of impulse over crater volume (I/V) remained constant for the entire range of drop sizes, impact velocities, and surface conditions used in this study. Surface shear strength, represented by the penetration depth of fall‐cone penetrometer, appeared to be a key factor involved in this process. An equation was developed which related crater volume to cone penetration depth and impact impulse. Crater volume, which appeared to be a better indicator of the total amount of material dislodged by a raindrop than splash amount, can thus be predicted using this equation. Copyright © 2004 John Wiley & Sons, Ltd.     

议京西大台地区的燕山运动

作者研究了京西大台地区的燕山运动，初步研究表明：这里不存在强烈的挤压变形迹象和显著的角度不整合．缺乏磨拉石建造。龙门组是厚度有限的河流相沉积，九龙山组是具有弱火山活动的湖相一滨湖相沉积。在隆起带和沉降带之间侏罗系地层显著的厚度变化率、大安山一斋堂滑覆构造及其派生的髫髻山断陷盆和大量高角度滑动面理，都显示了伸展构造背景下基底断块的差异升降。髫髻山组与壳幔相互作用有关的一套火山岩显示了上述运动的深部背景。     

大渡河次级支流斯合沟泥石流特征研究

泥石流作为地质环境较差、的山区的主要自然灾害之一，对它的研究尤其是泥石流规律方面的研究已取得了较大的成绩。但是对于泥石流的研究思路却有待进一步发展和完善，这在很大程度上将对山区的工程建设有很重要的指导意义。论文从工程地质研究思路的角度出发，对位于大渡河支流官料河上某水电站下闸址区的斯合沟泥石流进行了研究。文中采用工程地质分析的方法对大渡河次级支流斯台沟泥石流的形成环境(地层岩性条件、构造条件、地貌条件、气象条件、植被发育及人类活动)、基本特征(泥石流沟的基本特征、泥石流的堆积特征)进行了系统的研究，提出了该泥石流的形成演化过程及其机制模型(初期是堰塞式沟谷型泥石流，后期逐渐转向汇聚式沟谷型泥石流)。并在此基础上对泥石流沟沿岸的岸坡稳定性(可能泥石流的物源)等进行了评价分析。将定性分析和定量分析相结合，对泥石流的活动趋势以及可能泥石流的体积(未来泥石流形成将主要是在面蚀和沟蚀作用下的坡面泥石流。泥石流规模较小，且由于沟谷中下游坡降的进一步减缓，形成的泥石流物质一般将沿途停积．实际进入官料河内的体积很小)做出了较为科学的评价预测。经过这样的系统分析对工程建设中的泥石流防治有着积极的指导意义。     

Roles for fluid and/or melt advection in forming high-P mafic migmatites, Fiordland, New Zealand

A series of striking migmatitic structures occur in rectilinear networks through western Fiordland, New Zealand, involving, for the most part, narrow anorthositic dykes that cut hornblende‐bearing orthogneiss. Adjacent to the dykes, host rocks show patchy, spatially restricted recrystallization and dehydration on a decimetre‐scale to garnet granulite. Although there is general agreement that the migration of silicate melt has formed at least parts of the structures, there is disagreement on the role of silicate melt in dehydrating the host rock. A variety of causal processes have been inferred, including metasomatism due to the ingress of a carbonic, mantle‐derived fluid; hornblende‐breakdown leading to water release and limited partial melting of host rocks; and dehydration induced by volatile scavenging by a migrating silicate melt. Variability in dyke assemblage, together with the correlation between dehydration structures and host rock silica content, are inconsistent with macroscopic metasomatism, and best match open system behaviour involving volatile scavenging by a migrating trondhjemitic liquid.     

Age and significance of core complex formation in a very curved orogen: Evidence from fission track studies in the South Carpathians (Romania)

Twenty-four new zircon and apatite fission track ages from the Getic and Danubian nappes in the South Carpathians are discussed in the light of a compilation of published fission track data. A total of 101 fission track ages indicates that the Getic nappes are generally characterized by Cretaceous zircon and apatite fission track ages, indicating cooling to near-surface temperatures of these units immediately following Late Cretaceous orogeny.The age distribution of the Danubian nappes, presently outcropping in the Danubian window below the Getic nappes, depends on the position with respect to the Cerna-Jiu fault. Eocene and Oligocene zircon and apatite central ages from the part of the Danubian core complex situated southeast of this fault monitor mid-Tertiary tectonic exhumation in the footwall of the Getic detachment, while zircon fission track data from northwest of this fault indicate that slow cooling started during the Latest Cretaceous. The change from extension (Getic detachment) to strike-slip dominated tectonics along the curved Cerna-Jiu fault allowed for further exhumation on the concave side of this strike-slip fault, while exhumation ceased on the convex side. The available fission track data consistently indicate that the change to fast cooling associated with tectonic denudation by core complex formation did not occur before Late Eocene times, i.e. long after the cessation of Late Cretaceous thrusting.Core complex formation in the Danubian window is related to a larger-scale scenario that is characterized by the NNW-directed translation, followed by a 90° clockwise rotation of the Tisza-Dacia “block” due to roll-back of the Carpathian embayment. This led to a complex pattern of strain partitioning within the Tisza-Dacia “block” adjacent to the western tip of the rigid Moesian platform. Our results suggest that the invasion of these southernmost parts of Tisza-Dacia started before the Late Eocene, i.e. significantly before the onset of Miocene-age rollback and associated extension in the Pannonian basin.     

Creation of the Cocos and Nazca plates by fission of the Farallon plate

Throughout the Early Tertiary the area of the Farallon oceanic plate was episodically diminished by detachment of large and small northern regions, which became independently moving plates and microplates. The nature and history of Farallon plate fragmentation has been inferred mainly from structural patterns on the western, Pacific-plate flank of the East Pacific Rise, because the fragmented eastern flank has been subducted. The final episode of plate fragmentation occurred at the beginning of the Miocene, when the Cocos plate was split off, leaving the much reduced Farallon plate to be renamed the Nazca plate, and initiating Cocos–Nazca spreading. Some Oligocene Farallon plate with rifted margins that are a direct record of this plate-splitting event has survived in the eastern tropical Pacific, most extensively off northern Peru and Ecuador. Small remnants of the conjugate northern rifted margin are exposed off Costa Rica, and perhaps south of Panama. Marine geophysical profiles (bathymetric, magnetic and seismic reflection) and multibeam sonar swaths across these rifted oceanic margins, combined with surveys of 30–20 Ma crust on the western rise-flank, indicate that (i) Localized lithospheric rupture to create a new plate boundary was preceded by plate stretching and fracturing in a belt several hundred km wide. Fissural volcanism along some of these fractures built volcanic ridges (e.g., Alvarado and Sarmiento Ridges) that are 1–2 km high and parallel to “absolute” Farallon plate motion; they closely resemble fissural ridges described from the young western flank of the present Pacific–Nazca rise. (ii) For 1–2 m.y. prior to final rupture of the Farallon plate, perhaps coinciding with the period of lithospheric stretching, the entire plate changed direction to a more easterly (“Nazca-like”) course; after the split the northern (Cocos) part reverted to a northeasterly absolute motion. (iii) The plate-splitting fracture that became the site of initial Cocos–Nazca spreading was a linear feature that, at least through the 680 km of ruptured Oligocene lithosphere known to have avoided subduction, did not follow any pre-existing feature on the Farallon plate, e.g., a “fracture zone” trail of a transform fault. (iv) The margins of surviving parts of the plate-splitting fracture have narrow shoulders raised by uplift of unloaded footwalls, and partially buried by fissural volcanism. (v) Cocos–Nazca spreading began at 23 Ma; reports of older Cocos–Nazca crust in the eastern Panama Basin were based on misidentified magnetic anomalies.There is increased evidence that the driving force for the 23 Ma fission of the Farallon plate was the divergence of slab-pull stresses at the Middle America and South America subduction zones. The timing and location of the split may have been influenced by (i) the increasingly divergent northeast slab pull at the Middle America subduction zone, which lengthened and reoriented because of motion between the North America and Caribbean plates; (ii) the slightly earlier detachment of a northern part of the plate that had been entering the California subduction zone, contributing a less divergent plate-driving stress; and (iii) weakening of older parts of the plate by the Galapagos hotspot, which had come to underlie the equatorial region, midway between the risecrest and the two subduction zones, by the Late Oligocene.     

9: Processes of tectonism, magmatism and mineralization: Lessons from Europe

Metallogenic provinces in Europe range in age from the Archaean to the Neogene. Deposit types include porphyry copper and epithermal Cu–Au, volcanic-hosted massive sulphide (VMS), orogenic gold, Fe-oxide–Cu–Au, anorthosite Fe–Ti-oxide and sediment-hosted base-metal deposits. Most of them formed during short-lived magmatic events in a wide range of tectonic settings; many can be related to specific tectonic processes such as subduction, hinge retreat, accretion of island arcs, continental collision, lithosphere delamination or slab tear. In contrast, most sediment-hosted deposits in Europe evolved in extensional, continental settings over significant periods of time. In Europe, as elsewhere, ore formation is an integral part of the geodynamic evolution of the Earth's crust and mantle. Many tectonic settings create conditions conducive to the generation of water-rich magma, but the generation of ore deposits appears to be restricted to locations and short periods of change in temperature and stress, imposed by transitory plate motions. Crustal influence is evident in the strong structural controls on the location and morphology of many ore deposits in Europe. Crustal-scale fault–fracture systems, many involving strike-slip elements, have provided the fabric for major plumbing systems. Rapid uplift, as in metamorphic core complexes, and hydraulic fracturing can generate or focus magmatic–hydrothermal fluid flow that may be active for time spans significantly less than a million years. Once a hydrologically stable flow is established, ore formation is strongly dependent on the steep temperature and pressure gradients experienced by the fluid, particularly within the upper crust. In Europe, significant fracture porosity deep in the crystalline basement (1%) is not only important for magmatic–hydrothermal systems, but allows brines to circulate down through sedimentary basins and then episodically upward, expelled seismically to produce sediment-hosted base-metal deposits and Kupferschiefer copper deposits. Emerging research, stimulated by GEODE, can improve the predicting power of numerical simulations of ore-forming processes and help discover the presence of orebodies beneath barren overburden.     

河流阶地演化与走滑断裂滑动速率

断裂滑动速率是活动构造定量研究的最重要参数之一,不仅可以直接应用于活动构造的地震危险性预测和工程场地的地震安全性评价,还为地球动力学研究提供不可缺少的重要信息。原理上,断裂滑动速率可以用总位移量除以其累积时间而获得,但准确地确定断裂滑动速率并不是一件容易的事情,不同方法和研究者测定的同一条断裂的滑动速率可以相差3倍。文中通过对河流基座阶地演化及其对走滑断裂错动响应过程的分析发现,当一条山前河流切入河漫滩使其废弃形成阶地后,断裂的走滑位移使得河流两侧的阶地陡坎都遭到错动,其中一侧的下游阶地陡坎被错入河道而遭到河流的侵蚀,另一侧的下游阶地陡坎被错离河道,受到河流上游右侧地貌的保护而免遭侵蚀。因此,被错离河道一侧的阶地陡坎的位移在上阶地形成时就开始积累,阶地面的暴露年龄相当于位移累积的起始年代。另外,被错离河道一侧的阶地陡坎在下阶地停止侧蚀(可能同时开始接受沉积)时就开始累积位移,下阶地的初始沉积年代也代表阶地陡坎位移开始累积的时间。当然,如果能够获得被位移阶地陡坎的上下阶地年龄,就更能够把滑动速率限定在可靠的范围之内。在上述分析的基础上,提出3种利用河流阶地确定走滑断裂滑动速率的方法:第一是利用上下阶地年龄限定     

Research on formation density MWD instrument in engineering geological exploration

A high efficiency method is very important in geological survey for a new city in China. Geophysical parameters are Measured While Drilling(MWD), and these parameters are processed and explained on the ground, so the method can replace conventional engineering geological exploration for drilling rock sample. According petroleum engineering MWD, using the different characters of different rock absorbs γ radial, with the method of storing data in hole and explaining data on the ground, engineering geological exploration formation density MWD is researched. The MWD works stabilized, and the performance is good with precise data.     

Geochemistry of Brines from Salt Ore Deposits in Western Tarim Basin

In the geological evolution of the Tarim Basin, many transgressions and relictions happened. So there have been plentiful sources of salt. Moreover, because of uttermost drought, a lot of salt has been deposited. It is possible to find potash salt in this area. In our fieldwork, we have found salt and brine in western Tarim Basin. Based on a geological survey and the characteristics of sedimentary facies and paleogeography, this paper deals with the geochemical parameters and discusses the possibility of formation of potash salt in terms of the chemical analyses of samples collected from western Tarim Basin. Results of brine analysis lead to some conclusions: most of these salt brines have eluviated from very thick halite beds, mainly chloridetype salt and this kind of halite does not reach the stage of potash deposition in all aspects; WKSL (Wukeshalu) occupies a noticeable place, and we should attach importance to this district because there have been some indicators of the occurrence of potash deposits as viewed from the contents of Br and K. Finally, low Br contents are recognized in the Tarim Basin as a result of salt aggradation, and this point of view has been proved by the results of this experiment and the data available. It cannot depend upon the index of Br to judge the evolution stage of halite. We must look for other facies of potash except marine facies.