基于多层DEM建立小比例尺三维地质模型的方法——以山东省滨州市沿海地区为例

在钻孔数据较少时,为提高小比例尺三维地质模型的精度,利用GMS软件根据多层DEM建立模型。该文通过分析实际条件下地层分布特点,提出了不同数据精度下DEM相交计算的原则。将修改后的DEM导入原模型中,再次插值形成三维地质模型。利用GMS软件得到的三维地质模型,具有可查询,可任意角度任意位置切割剖面的功能。     

Optimization of the in-situ U–Pb age dating method via LA-Quadrupole-ICP-MS with applications to the timing of U–Zr–Mo mineralization in the Poços de Caldas Alkaline Complex,SE Brazil

The high spatial resolution of the LA-ICP-MS systems allows rapid extraction of vital isotopic information from individual growth zones of minerals. This paper describes in detail the optimization of a relatively inexpensive LA-ICP-MS system consisting of a UV 213 Laser Ablation and a Quadrupole ICP-MS. The results of optimization take into account laser energy, beam diameter, frequency and ICP-MS gas conditions. The optimized conditions were tested for precision and accuracy on a number of well-characterized zircons, commonly used as primary and secondary quality control standards. The acquisition of the U–Pb data is carried out in automated mode (pre-set points) for up to 12 h/day with only minimal operator presence. Individual U–Pb zircon analysis lasts 80 s. The 2σ uncertainties of the standards ranged between 1.4 and 8.2%, and overall their relative deviations ranged from 0.02 to 0.87%. The results are comparable to techniques that use more complex and time-consuming approaches such as LA-MC-ICP-MS and ion-microprobe. We have applied this method to obtain ages of numerous granitoid rocks from the Southern São Francisco Craton and a well-known Archean granitoid of the Kaapvaal Craton, South Africa. We furthermore provide the first results of U–Pb age dating of U–Zr–Mo mineralization in the Poços de Caldas Alkaline Complex, SE Brazil, with a U–Pb age of 85 ± 3 Ma for zircon-bearing hydrothermal veins.     

A Study of the Local Geometric Accuracy of Count de Ferraris's Carte de cabinet (1770s) Using Differential Distortion Analysis

The eighteenth century Carte de cabinet of count de Ferraris is the first large-scale (1:11?520) topographic map of the entire Belgian territory, making it a valuable source of historical information. In the past, a number of studies have tried to assess the geometric accuracy of this map, but they all suffer from restricted technical capabilities for computing and visualizing the distortions, and most of them only focus on a limited number of the 275 map sheets. This paper therefore seeks to provide the first systematic and in-depth investigation of the map’s local geometric accuracy. Recently, two Belgian government agencies georeferenced the Flemish and Walloon part of the Carte de cabinet with a high level of detail, using some 30,000 ground control points to link the old map to the modern topographic map of Belgium. These data sets represent a new and unprecedented potential source of accuracy information. However, the high number of control points and our desire to compute distortions in an exact, local, quantitative and continuous way meant prominent techniques for studying the geometric accuracy of old maps, such as displacement vectors, distortion grids, triangular nets and the popular MapAnalyst software, were unsuited for this task. To meet all our requirements a new technique called Differential Distortion Analysis, which is influenced by the treatment of distortions in map projection theory, was used instead. Its advantages, structure and application to the Carte de cabinet are discussed in detail. The new technique allows calculating and displaying the map’s local angular and surface distortions with a very high spatial resolution. Consequently, it was possible to identify trends in the obtained levels of accuracy and to relate these to historical facts about the Carte de cabinet’s production process. This has resulted in important new insights into the map’s geometric accuracy.     

基于应用技术型大学战略转型的GIS实践教学体系构建

实践教学在GIS专业人才培养过程中发挥着重要作用,对于应用技术型大学的GIS专业人才培养,实践教学体系的构建更加重要。分析应用技术型大学GIS实践教学的作用,阐述实践教学体系内容设计原则、实践教学体系构成,并给出GIS专业实践教学体系设计实例,探讨实践教学应注意的具体问题。     

Combined Separation of Cu,Fe and Zn from Rock Matrices and Improved Analytical Protocols for Stable Isotope Determination

Isotope ratios of heavy elements vary on the 1/10000 level in high temperature materials, providing a fingerprint of the processes behind their origin. Ensuring that the measured isotope ratio is precise and accurate depends on employing an efficient chemical purification technique and optimised analytical protocols. Exploiting the disparate speciation of Cu, Fe and Zn in HCl and HNO₃, an anion exchange chromatography procedure using AG1‐×8 (200–400 mesh) and 0.4 × 7 cm Teflon columns was developed to separate them from each other and matrix elements in felsic rocks, basalts, peridotites and meteorites. It required only one pass through the resin to produce a quantitative and pure isolate, minimising preparation time, reagent consumption and total analytical blanks. A ThermoFinnigan Neptune Plus MC‐ICP‐MS with calibrator‐sample bracketing and an external element spike was used to correct for mass bias. Nickel was the external element in Cu and Fe measurements, while Cu corrected Zn isotopes. These corrections were made assuming that the mass bias for the spike and analyte element was identical, and it is shown that this did not introduce any artificial bias. Measurement reproducibilities were ± 0.03‰, ± 0.04‰ and ± 0.06‰ (2s) for δ⁵⁷Fe, δ⁶⁵Cu and δ⁶⁶Zn, respectively.     

IsoSpike: Improved Double‐Spike Inversion Software

The double‐spike approach for correction of instrumental mass bias in mass spectrometry data is well established. However, there is very little consistency within the scientific community in terms of double‐spike data reduction. Double‐spike solutions require computer calculation, using either geometric or algebraic approaches, and are often performed using spreadsheet calculations that vary from group to group and between isotope systems. Here, we present IsoSpike, a generalised computer procedure for the processing of double‐spike mass spectrometry data, built as an add‐on for the Iolite data‐reduction package ( www.iolite.org.au ). Use of this software permits visualisation of mass spectrometry data in a time window, and rigorous treatment and screening of data. Additionally, IsoSpike uses an integration‐by‐integration approach where the double‐spike calculations are performed on every integration within an analysis, providing straightforward quantification of uncertainties on double‐spike‐corrected isotope ratios. The advantages of this approach over traditional methods are discussed here. Platinum stable isotope data are presented as an example data set, although the procedure is applicable to any double‐spike system. IsoSpike is freely available from www.isospike.org .     

Comparison of grey and phase-space rainfall forecasting models using a fuzzy decision method / Comparaison grâce à une méthode de décision floue des modèles gris et d’espace des phases pour la prévision de pluie

Abstract

Abstract This work applies a fuzzy decision method to compare the performance of the grey model with that of the phase-space model, in forecasting rainfall one to three hours ahead. Four indices and two statistical tests are used to evaluate objectively the performance of the forecasting models. However, a trade-off must be made in choosing a suitable model because various indices may lead to different judgements. Therefore, a fuzzy decision model was applied to solve this problem and to make the optimum decision. The results of fuzzy decision making demonstrate that the grey model outperforms the phase-space model for forecasting one hour ahead, but the phase-space model performs better for forecasting two or three hours ahead.     

Models for extremes using the extended three-parameter Burr XII system with application to flood frequency analysis / Modèles d’extrêmes utilisant le système Burr XII étendu à trois paramètres et application à l’analyse fréquentielle des crues

Abstract

Abstract A new theoretically-based distribution in frequency analysis is proposed. The extended three-parameter Burr XII distribution includes the generalized Pareto distribution, which is used to model the exceedences over threshold; log-logistic distribution, which is also advocated in flood frequency analysis; and Weibull distribution, which is a part of the generalized extreme value distribution used to model annual maxima as special cases. The extended Burr distribution is flexible to approximate extreme value distribution. Note that both the generalized Pareto and generalized extreme value distributions are limiting results in modelling the exceedences over threshold and block extremes, respectively. From a modelling perspective, generalization might be necessary in order to obtain a better fit. The extended three-parameter Burr XII distribution is therefore a meaningful candidate distribution in the frequency analysis. Maximum likelihood estimation for this distribution is investigated in the paper. The use of the extended three-parameter Burr XII distribution is demonstrated using data from China.     

Glacier shrinkage and negative mass balance in the Chilean Lake District (40°S) / Rétrécissement glaciaire et bilan massique négatif dans la Région des Lacs du Chili (40°S)

Abstract

Ice-capped volcanoes of the Chilean Lake District have shown significant glacier retreat during recent decades, probably in response to tropospheric warming and precipitation decrease. Volcán Mocho-Choshuenco (39°55′S, 72°02′W) is one of the main active volcanoes in this part of the country. A mass balance programme was initiated on its southeastern glacier in 2003, in view of its representative conditions as an ice body that is presumably not affected by current volcanic activity. The glaciers of this volcano have been retreating and shrinking in recent decades; by 2003 there had been a reduction of 40% of the original area of 28.4 km² in 1976. A maximum decrease of area was observed in the most recently analysed period, a rate of 0.45 km² year^-1 between 1987 and 2003. The glacier average net mass balance of 2003/04 yielded ?0.88 m w.e. (water equivalent) per year (±0.18), with an average net accumulation and ablation of 2.59 and ?3.47 m w.e. per year, respectively. This is the first direct measurement of glacier mass balance in southern Chile, where very little is known about glacier variations and glacier–volcano interactions.