半空间埋置动点源荷载问题的传递矩阵法

引用了流体饱和两相多孔介质的动力控制方程分析半空间埋置动点源荷载问题的位移和变形。经过Laplace Hankel变换 ,控制方程化成常微分方程组。利用数学软件mathmatic对上述方程组求解 ,可以得到单层砂土的传递矩阵。分析过程中 ,假设在两层面上 ,位移与应力相互连续 ,可以借鉴有限元的思想进行耦合计算。这样就获得了在饱和砂土中施加竖向动荷载问题的Laplace Hankel变换解 ,其最终的解还需要通过Laplace Hankel逆变换得到     

Triaxial stress state deep in orogenic belts: an example from Turkey

A rare metachert pebble containing amphibole grains with microboudin structures in a wide range of orientations provides an opportunity to perform stress analysis in two orthogonal orientations on the foliation surface. The sample was analysed by the microboudin method to infer the triaxial stress state during microboudinage. Stress parameters proportional to the far-field differential stress were determined for sodic amphibole grains in the two orientations. The ratio of the stresses in the two orthogonal orientations (σ₁−σ₂)/(σ₁−σ₃) was calculated to be 0.64, indicating that σ₂ lies closer to the midpoint between σ₁ and σ₃ than to σ₃.     

Direct Current Plasma Emission Spectrometric Determination of Major, Minor and Trace Elements in Microwave Oven Acid Leachates of Powdered Whole Coal Samples

Major concentrations of Al₂O₃, Fe₂O₃, MgO, CaO, Na₂O and K₂O, minor levels of TiO₂, P₂O₅ and thirty petrologically, geochemically and environmentally significant trace elements have been determined in microwave oven acid leachates of whole powdered coal samples by direct current plasma‐atomic emission spectrometry (DCP‐AES). A single sample preparation procedure was suitable for all the determinations with no additional dilution step for major elements solution. Dried samples (0.5 g) were treated in low‐pressure PFA digestion vessels with HF/HCl/HNO₃/HClO₄ acids to quantitatively extract the analytes from the bulk material, while leaving the major part of organic matrix as a residue. The major constituents of geological samples, in particular the easily ionised elements (EIEs) such as alkali and alkaline earths, may complicate the instrumental determinations in DCP‐AES because of differential enhancements of elemental emission intensities and stray light interferences. Taking account of these factors, the coal matrix is considered to have very low major oxide totals as compared to many other common geo‐environmental and related materials (rocks, sediments, soil, ashes etc.). The sample size employed here, while yielding a relatively concentrated solution to cover a wide range of elemental determinations, provided a sample matrix that significantly diminished interferences for DCP measurements. The need for closely matching the unknowns and calibrators was eliminated except for overall acidity and an excess quantity of caesium for EIE buffering. Calibration of the spectrometer was accomplished by simple aqueous single element solutions as high concentration calibrators in addition to a reagent blank as a low concentration calibrator. Two point working curves were established to allow for the maximum concentrations of each element expected in the unknowns. The precision of determinations under routine conditions as well as the reproducibility of the leaching and precision of instrumental measurements have been evaluated. Relative standard deviations (RSD) were of 1–2% for those elements whose concentrations in solid samples were well above the limits of quantification. Method detection limits in the buffered solutions were also evaluated. To evaluate the accuracy of the microwave oven‐DCP method a suite of eight certified coal reference materials of differing rank, were analysed with good agreement with the certified and/or available published data. Results are presented for the uncertified major oxides in the AR series reference materials.     

反射地震走时层析成像中的大型稀疏矩阵压缩存储和求解

反射地震走时层析成像是一种精度较高的速度求取方法,最终可归结为线性方程组的求解.方程组具有很大的维数,常规解法需要很大的存储量和计算量.本文考虑到当投影函数取为走时残差,图象函数取为慢度残差时,灵敏度矩阵中的元素表示射线经过网格的长度的特殊物理意义,采用行索引的压缩存储方式,在射线追踪正演模拟过程中直接压缩存储灵敏度矩阵,在层析反演过程中利用压缩后的矩阵进行求解,大大降低了存储量和计算量.     

居民出行与轨迹行为交互模式挖掘与关联技术

出租车是居民出行的重要交通工具,其轨迹数据蕴含着丰富的居民出行信息.原始出租车轨迹数据因缺少语义信息无法直观反映居民出行规律.通过轨迹数据挖掘技术处理之后的出租车轨迹数据能够反映居民活动规律和行为模式,从而为城市规划决策提供参考依据.本文重点研究了基于语义的交互模式度量,通过出租车停留点推断其语义信息;然后根据语义信息...     

气候影响下膨胀土开裂的力学分析

采用线弹性断裂力学的方法,针对气候影响下的膨胀土开裂问题,提出了膨胀土开裂深度和裂缝间距的定量表达式,经比较与现场实测结果基本一致。并对开裂深度与泊松比、断裂韧度、基质吸力等土体特性参数的关系进行了详细的论述。     

关于薄壁金刚石钻头胎体性能的探讨

对薄壁金刚石钻头胎体进行了性能分析和配方设计探讨，尤其根据被钻切介质对钻头胎体性能的要求作了较详细的分析，从理论分析结合实践经验筛选出了钻切建筑石材和各种钢筋砼的钻头胎体配方，在生产中满足了钻头工作条件的要求。     

山西黄土塬区三维地震勘探的实际应用

寿阳平头镇三维地震勘探区位于寿阳-阳泉构造堆积盆地的西北部，属黄土丘陵地貌，梁、峁比较发育，相对高差一般在30～50m。本区第四系覆盖较厚，纵横向变化大，且该地层中夹有砾石层和钙质结核层，难以成孔。地震激发与接收困难较大。通过多次的试验工作，最终确定采用变观措施来解决表浅层地震地质条件极差问题：避开黄土覆盖较厚地段，将炮点变观到较薄地段或者是基岩出露地段，并尽可能加深炮孔到理想激发层位。通过变观处理，记录品质明显提高。     

Analysis of Sediments and Soils by X-Ray Fluorescence Spectrometry Using Matrix Corrections Based on Fundamental Parameters

Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) is widely used for the analysis of soils and sediments using well characterised procedures. However, difficulties can occur with samples such as unknowns containing small amounts of ore materials and samples collected from contaminated sites where trace elemental concentrations can exceed the concentration range for routine analysis. We studied the performance of a commercially available method, based on fundamental parameters (FP) to correct matrix effects. The spectrometer was originally calibrated with elemental or simple compound calibrants. Samples were analysed as pressed powder pellets. Eighteen sediment and soil reference materials, three of them with certified values for some of their constituents, were used to evaluate accuracy, by comparing results with recommended values and their standard deviations (RV ± 2s) or certified values and their confidence intervals (CV ± Cl). When results fell systematically outside these intervals, calibrations were refined with geochemical reference materials. The best agreement of results with recommended and certified values was obtained when the contents of H₂O and C in each sample were included as matrix constituents during calculations. The detection limits of trace elements tended to be relatively high, because the measuring conditions employed were not maximised for sensitivity. The main advantage of the method tested was that it enabled the analysis of samples with high concentrations of trace elements and the determination of elements such as F, Bi, Sb and W, which are not commonly included in quantitative XRF analysis of geological samples.     

Lacustrine basin hydrocarbon exploration – current thoughts

Although much of the world's petroleum resource-base is associated with marine systems, regionally lacustrine petroleum systems are important. Individual accumulations may exceed several billion barrels. In each of these cases the oil is derived from a lacustrine source rock and may be produced from either nonmarine or marine reservoir rocks. The purpose of this paper is to describe the factors that control lacustrine source rock development and the nature of lacustrine reservoirs. Lacustrine oils display different physical and chemical characteristics than their marine counterparts. These differences can be related to the nature of their precursor material. Although the nature of the products are different, the geochemical threshold criteria for defining source rocks in both settings are the same because of common expulsion requirements. Commercially significant lacustrine systems require the presence of large, long-lived lakes. Such lake settings are tectonic in origin and restricted to climatic settings where precipitation exceeds evaporation. Within these large lake systems three primary factors determine source rock potential and quality. These factors are primary productivity level, organic preservation potential, and matrix sedimentation rate, which controls the dilution of preserved organic matter. Source rock potential is maximized where both productivity and preservation potential are maximized and sedimentation rate is minimized. To some degree these factors can compensate for each other. Hydrocarbon reservoir potential within lacustrine basins is partially impacted by overall tectonic setting. Within extensional settings, transport distances tend to be limited, with much of the sediment being transported away from the basin. The sediments delivered to the lake are poorly sorted and sedimentologically immature, commonly resulting in poor reservoirs due to both primary properties and their susceptibility to diagenesis. Within rifts better reservoirs tend to develop along platform or flexural margins. Stacking of reservoirs is important in lacustrine systems but baffles and barriers are often present between individual sand units. These barriers form as a result of lake level fluctuations. In compressional settings transport distances tend to be longer, resulting in more mature, better sorted sediments leading to higher quality reservoirs. These reservoirs typically develop in fluvial-deltaic and wave-dominated shoreline settings. Lacustrine carbonate reservoirs are locally important. These carbonates tend to develop during lake level lowstands and are dependent on diagenesis (dissolution and karstification) for porosity and permeability development. Lacustrine reservoirs are often stratigraphically and areally limited and display low individual well production rates. Within pure lacustrine systems exploration opportunities appear to be often restricted by either reservoir presence or quality (i.e., production rates). The best exploration opportunities in lacustrine basins appear to be associated with hybrid systems where a lacustrine source and marine reservoir exist.