基于航测的三维建模方法研究

随着“数字城市”项目在各大城市如火如荼地发展,城市景观重建是数字城市发展的首要步骤和重要内容。本文结合实际生产项目,对基于航测的三维建模方法进行研究。航测法三维建模通过立体采集建筑物平面几何高程数据,并结合测区DEM成果、影像数据等,使用Dibud软件自动生成三维模型,然后,使用3DMAX软件参考外业采集照片精细修模,给模型贴图等。     

塔河油气田AT1区块凝析气藏三维地质建模研究

以随机函数理论为基础,采用相控-多参数协同的随机建模方法,建立塔河油气田AT1区块凝析气藏三维地质模型,实现气藏精细三维表征。首先,以钻井和岩芯资料为基础构建储层构造模型;然后,以小层界面为控制条件建立储层结构模型;接着,在沉积相、地质条件的约束下,采用序贯指示模拟法来建立砂体骨架模型;随后,在砂体骨架模型内进行优势相计算,形成最终有效砂体骨架模型;最后,以有效砂体骨架模型为约束,采用序贯高斯模拟法建立储层物性参数模型。结果表明：将物性参数变量与微相分布结合的序贯高斯模拟法建立孔隙度等物性参数的分布模型,以及采用地质分析类比、地质统计分析等方法优选最佳模型是有效的地质建模方法;所建地质模型精确细致地表征了塔河油气田AT1区块凝析气藏构造格架及储层、流体三维分布,反映了辫状水道复合连片,东北向展布,储层物性受相控较明显,非均质性较强。     

格尔木－额济纳旗地学断面岩石图结构的磁场分析

在格尔木－额济纳旗地学断面的综合研究中，处理和解释了沿断面实测的高精度磁测剖面和大范围的航磁资料．所采用的处理方法有视磁化率填图、长波磁异常提取、方向滤波和航磁数字图像处理，并反演了地壳磁层的上、下界面深度．依据资料处理结果，对研究区内构造断裂的分布、不同地体和构造单元的划分与边界位置及岩浆活动性等都提出了新的认识．利用位场模拟方法，得出了代表格尔木－额济纳旗地学断面内地壳结构的磁模型．     

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.     

某深埋长隧地应力演化及围岩应力位移模拟研究

结合西部地区某深埋长大公路隧道信息化施工,对深埋长隧地应力演化及围岩应力位移进行了弹塑性有限元数值模拟研究.研究结果表明,隧道轴线现代地应力状况与隧道埋深、地层岩性及构造发育程度有关,最大地应力为40.0MPa左右;隧道周边围岩应力在曲边墙底部最大,约38.0MPa,隧道开挖引起的围岩应力影响范围约25.0m;隧道水平收敛和拱顶下沉位移与隧道埋深近于成直线关系.这些研究结果为深埋长隧信息化设计和施工以及围岩稳定性分析提供了科学依据.     

A parametric study on the impact of satellite attitude errors on GOCE gravity field recovery

In the recent design of the Gravity field and steady-state Ocean Circulation Explorer (GOCE) satellite mission, the gravity gradients are defined in the gradiometer reference frame (GRF), which deviates from the actual flight direction (local orbit reference frame, LORF) by up to 3–4°. The main objective of this paper is to investigate the effect of uncertainties in the knowledge of the gradiometer orientation due to attitude reconstitution errors on the gravity field solution. In the framework of several numerical simulations, which are based on a realistic mission configuration, different scenarios are investigated, to provide the accuracy requirements of the orientation information. It turns out that orientation errors have to be seriously considered, because they may represent a significant error component of the gravity field solution. While in a realistic mission scenario (colored gradiometer noise) the gravity field solutions are quite insensitive to small orientation biases, random noise applied to the attitude information can have a considerable impact on the accuracy of the resolved gravity field models.     

Geochemical modeling,fate distribution,and risk exposure of potentially toxic metals in the surface sediment of the Shyok suture zone,northern Pakistan

The objective of the current study was to assess the contamination of potentially toxic metals (PTMs) in weathered surface sediment, along stream tributaries, and surrounding area of the river Chitral, Shyok suture zone district Chitral, Pakistan. To understand the geochemical features of 113 sediment, samples were collected from the Mirkhani and Drosh area. Then, different statistical tools including the geo-accumulation index (Igeo), cluster analysis (CA), principal component analysis (PCA), and ecological risk assessment (ERA) were used to unravel the origin, intensity, and exposure level of PTMs to control risk and restore the ecosystem within the study area. The results for the PTMs namely nickle (Ni), chromium (Cr), copper (Cu), cadmium (Cd), lead (Pb), zinc (Zn), and cobalt (Co) in Mirkhani and Drosh were in the following ranges: 10–150, 15–210, 15–250, 0.08–1.00, 10–70, 76–240 and 14–51; and 13–240, 17–210, 15–150, 0.08–0.60, 7–140, 47–150 and 13–36 mg/kg, respectively. In consequence, the potential ecological risk caused by Pb, Ni, Cu, Co, Cr, and Zn is reflected by the percentages of samples with an ecological risk index (ERI) greater than one which were 100%, 91%, 100%, 100%, 92%, and 100%, respectively. However, the overall mean decreasing order of ecological risk of PTMs in the district Chitral was Pb > Ni > Cu > Co > Cr > Zn > Cd. Moreover, the PCA yielded 78% variability which indicated that mineral prospects play an important role in the contamination of sediment. Furthermore, the mineral phases of Pb and Zn suggested supersaturation, while that for Cd revealed unsaturation. The results of Igeo, ERI, and CA indicated contamination of PTMs in the study area. The ERI value of Pb, Ni, Cu, Co, Cr, and Zn was higher than 1 suggesting an ecological risk in the study area. Moreover, the current study showed the dominance of geogenic contamination with major contributions from ultramafic rock and known mineral prospects. Therefore, contaminated sediment of the Shyok suture zone is extremely detrimental to the aquatic ecosystem of the study area.