Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper. 相似文献
We designed a new seismic source model for Italy to be used as an input for country-wide probabilistic seismic hazard assessment (PSHA) in the frame of the compilation of a new national reference map.
We started off by reviewing existing models available for Italy and for other European countries, then discussed the main open issues in the current practice of seismogenic zoning.
The new model, termed ZS9, is largely based on data collected in the past 10 years, including historical earthquakes and instrumental seismicity, active faults and their seismogenic potential, and seismotectonic evidence from recent earthquakes. This information allowed us to propose new interpretations for poorly understood areas where the new data are in conflict with assumptions made in designing the previous and widely used model ZS4.
ZS9 is made out of 36 zones where earthquakes with Mw > = 5 are expected. It also assumes that earthquakes with Mw up to 5 may occur anywhere outside the seismogenic zones, although the associated probability is rather low. Special care was taken to ensure that each zone sampled a large enough number of earthquakes so that we could compute reliable earthquake production rates.
Although it was drawn following criteria that are standard practice in PSHA, ZS9 is also innovative in that every zone is characterised also by its mean seismogenic depth (the depth of the crustal volume that will presumably release future earthquakes) and predominant focal mechanism (their most likely rupture mechanism). These properties were determined using instrumental data, and only in a limited number of cases we resorted to geologic constraints and expert judgment to cope with lack of data or conflicting indications. These attributes allow ZS9 to be used with more accurate regionalized depth-dependent attenuation relations, and are ultimately expected to increase significantly the reliability of seismic hazard estimates. 相似文献
Coal seams burning underneath the surface are recognized all over the world and have drawn increasing public attention in the past years. Frequently, such fires are analyzed by detecting anomalies like increased exhaust gas concentrations and soil temperatures at the surface. A proper analysis presumes the understanding of involved processes, which determine the spatial distribution and dynamic behavior of the anomalies.In this paper, we explain the relevance of mechanical and energy transport processes with respect to the occurrence of temperature anomalies at the surface. Two approaches are presented, aiming to obtain insight into the underground coal fire situation: In-situ temperature mapping and numerical simulation. In 2000 to 2005, annual temperature mapping in the Wuda (Inner Mongolia, PR China) coal fire area showed that most thermal anomalies on the surface are closely related to fractures, where hot exhaust gases from the coal fire are released. Those fractures develop due to rock mechanical failure after volume reduction in the seams. The measured signals at the surface are therefore strongly affected by mechanical processes.More insight into causes and effects of involved energy transport processes is obtained by numerical simulation of the dynamic behavior of coal fires. Simulations show the inter-relation between release and transport of thermal energy in and around underground coal fires. Our simulation results show a time delay between the coal fire propagation and the observed appearance of the surface temperature signal. Additionally, the overall energy flux away from the burning coal seam into the surrounding bedrock is about 30-times higher than the flux through the surface. This is of particular importance for an estimation of the energy released based on surface temperature measurements. Finally, the simulation results also prove that a fire propagation rate estimated from the interpretation of surface anomalies can differ from the actual rate in the seam. 相似文献
MODFLOW is a groundwater modeling program. It can be compiled and remedied according to the practical applications. Because
of its structure and fixed data format, MODFLOW can be integrated with Geographic Information Systems (GIS) technology for
water resource management. The North China Plain (NCP), which is the politic, economic and cultural center of China, is facing
with water resources shortage and water pollution. Groundwater is the main water resource for industrial, agricultural and
domestic usage. It is necessary to evaluate the groundwater resources of the NCP as an entire aquifer system. With the development
of computer and internet information technology it is also necessary to integrate the groundwater model with the GIS technology.
Because the geological and hydrogeological data in the NCP was mainly in MAPGIS format, the powerful function of GIS of disposing
of and analyzing spatial data and computer languages such as Visual C and Visual Basic were used to define the relationship
between the original data and model data. After analyzing the geological and hydrogeological conditions of the NCP, the groundwater
flow numerical simulation modeling was constructed with MODFLOW. On the basis of GIS, a dynamic evaluation system for groundwater
resources under the internet circumstance was completed. During the process of constructing the groundwater model, a water
budget was analyzed, which showed a negative budget in the NCP. The simulation period was from 1 January 2002 to 31 December
2003. During this period, the total recharge of the groundwater system was 49,374 × 106 m3 and the total discharge was 56,530 × 106 m3 the budget deficit was −7,156 × 106 m3. In this integrated system, the original data including graphs and attribution data could be stored in the database. When
the process of evaluating and predicting groundwater flow was started, these data were transformed into files that the core
program of MODFLOW could read. The calculated water level and drawdown could be displayed and reviewed online. 相似文献
Flood mapping requires the combination and integration of geomorphological and hydrological-hydraulic methods; however, despite
this, there is very little scientific literature that compares and validates both methods. Two types of analysis are addressed
in the present article. On the one hand, maps of flood plains have been elaborated using geomorphological evidence and historical
flood data in the mountainous area of northwestern Spain, covering an area of more then 232 km2 of floodplains. On the other hand, a hydrometeorological model has been developed (Clark semidistributed unit hydrograph)
in the Sarria River basin (155 km2, NW Spain). This basin is not gauged, hence the model was subjected to a goodness-of-fit test of its parameter (curve number)
by means of Monte Carlo simulation. The peak flows obtained by means of the hydrological model were used for hydraulic modeling
(one-phase, one-dimensional and steady flow) in a 4 km2 urban stretch of the river bed. The delineation of surface areas affected by floods since 1918, as well as those analyzed
subsequent to the geomorphological study, reveals a high degree of reliability in the delineation of the flooded areas with
frequent recurrence intervals (<50 years). If we compare these flooded surface areas with the estimate obtained by the hydrological-hydraulic
method we can see that the latter method overestimates the extent of the surface water by 144% for very frequent recurrence
intervals (>10 years) and underestimates it as the recurrence interval increases, by up to 80% less floodplain for exceptional
events (>500 years). Finally, a management map is put forth combining the most reliable results available by integrating both
methods.
Originally presented at the Sixth International Conference on Geomorphology. 相似文献
The Orissa coast of India is one of the most vulnerable regions of extreme sea levels associated with severe tropical cyclones.
There was extensive loss of life and property due to the October 1999 super cyclone, which devastated large part of the Orissa
coast. The shallow nature of the head bay, presence of a large number of deltas formed by major rivers of Orissa such as Mahanadi
and Dhamra, and high tidal range are responsible for storm surge flooding in the region. Specifically, rising and falling
tidal phases influence the height, duration, and arrival time of peak surge along the coast. The objective of the present
study is to evaluate the tide-surge interaction during the 1999 Orissa cyclone by using nonlinear vertically integrated numerical
models. The pure tidal solution for the head bay region of the Bay of Bengal provides the initial condition for the fine resolution
nested grid Orissa model. However, the feedback from the Orissa model does not affect the head bay model as the study provides
a one-way interaction. Numerical experiments are performed to study the tide-surge interaction by considering various relative
phases of the tidal waves with the surge-wave produced by 1999 Orissa cyclone. The comparison, although utilizing only the
limited estimates of tidal data, appears adequate to assert that the principal features are reproduced correctly. 相似文献
Using in situ strength measurements at pressures up to 10 GPa and at room temperature, 400, 600, and 700°C, we examined rheological
properties of olivine, orthopyroxene, and chromian-spinel contained in a mantle-derived xenolith. Mineral strengths were estimated
using widths of X-ray diffraction peaks as a function of pressure, temperature, and time. Differential stresses of all minerals
increase with increasing pressure, but they decrease with increasing temperature because of elastic strain on compression
and stress relaxation during heating. During compression at room temperature, all minerals deform plastically at differential
stress of 4–6 GPa. During subsequent heating, thermally induced yielding is observed in olivine at 600°C. Neither orthopyroxene
nor spinel shows complete stress relaxation, but both retain some stress even at 700°C. The strength of the minerals decreases
in the order of chromian-spinel ≈ orthopyroxene > olivine for these conditions. This order of strength is consistent with
the residual pressure of fluid inclusions in mantle xenoliths. 相似文献
In this article, analytical methods have been used to estimate ground motion during the 8 October 2005, Kashmir earthquake.
Peak ground acceleration (PGA) values at several stations in the epicentral region have been estimated by empirical analytical
source mechanism models. As an alternate analysis, PGA estimates have also been obtained using the stochastic finite fault
seismological model. The estimated PGAs are compared with that obtained from damage values. A PGA contour map in the near-source
region is provided. It is found that very near to the epicenter, PGA would have reached more than 1 g. It is demonstrated
that empirical analytical models can be effectively used to estimate ground motion due to rupture of active faults. 相似文献