海拉尔盆地贝尔凹陷的油气运聚分析

海拉尔盆地贝尔凹陷是一个以白垩系沉积为主的陆相断陷区。采用条件分析法,对贝尔凹陷的油气运聚条件及其成藏的基本模式进行了系统研究,认为,贝尔凹陷在剖面上有3套成藏组合,其中中部成藏组合最佳;在平面上可分为5个运聚系统,其中以位于凹陷西北部的3个系统为最佳。该凹陷不同构造部位的运聚条件相差较大,生烃洼陷深部位的油气运移以砂岩储集层和断裂为主要输导通道,构造高部位的油气运移以断裂为主,而两者之间的油气输导则以不整合面和断裂为主。在油气运聚和成藏模式分析的基础上,认为贝尔凹陷油气运聚的有利条件主要包括生油凹陷有充足的油源、生油区内有继承性发育的圈闭构造以及各运聚要素间存在良好的时空配置关系3个方面。     

应用航放资料寻找非放射性金属矿产效果探讨

本通过对粤北地区已知的52个非放射性金属矿床（点）的地质、物化探特征的统计资料综合分析，建立了评价非放射性金属矿产成矿远景的航空能谱参数模型，结合重磁测量、重砂测量及金属量测量成果，预测了4片非放射性金属矿产成矿远景区。     

平原河网区域来水组成原理

对于一般树状分布河网，上一级河道总是汇入至下一级河道，位于河道下游断面的流量总是由其上游汇集而至。但对于平原河网地区，特别是人工控制建筑物众多，又受潮汐影响的地区(如太湖流域)，河网错综复杂，水流方向不定，要跟踪某个断面的水流去向，或某个河段的水体、断面流量是从哪里汇集而来的，非常困难。但这样的问题在生产实践中往往对其很感兴趣。例如从常熟枢纽引长江水流进入望虞河后，流向何处?河网各断面流量中或各河段水体中常熟枢纽引江水量占多少比重?对这些问题的研究可以估计常熟枢纽引江的效果和影响范围。因此，平原河网区域来水组成方法在生产实践中具有重要意义。重点介绍了平原河网区域来水组成原理及其在太湖流域的应用。     

静力触探中土层界面效应试验研究

根据成层土模型试验结果,对静力触探中土层面效应进行试验研究和机理分析,取得了成层土界面效应的规律性,为利用静力触探划分土层提供了理论和实践依据。     

基于自然水系网信息的元素运移分析

地面上的矿物或污染物元素主要是随水系而运移的。因此，利用自然水系网信息来定量分析元素沿水系的迁移、分散，对于地质找矿和环境保护都具有重要意义。在研究应用主概率权模拟模型产生自然水系网的基础上，提出了元素在水系网中运移的计算方法，结合所模拟出的水系网，具体分析了元素在其中的迁移、扩散情况，给出了正问题和反问题的计算结果。结果表明，正、反问题的求解具有一致性，方法是有效、可行的。     

极化水平层上天然场源激电测深的理论研究

采用Dias模型表征介质的激电效应,对三层水平地层中间层为极化层的天然电磁场源激电测深之视电阻率及阻抗相位进行了理论计算.利用中间层充电率m₂≠0和m₂=0时相同频率的视电阻率振幅比和阻抗相位差作为提取激电效应的参数,重点讨论了不同电阻率断面类型对激电测深异常的影响.最后,给出了在一个已知铅锌矿上的试验结果.     

基于预测控制的结构振动半主动控制研究

建立了半主动控制系统的理论模型，分析了半主动控制机理，并结合现代控制理论，将预测控制应用于结构半主动控制中，提出了在线预测控制算法，建立了预测模型，并成功的解决了时滞问题，最后作了计算机仿真分析，证明该系统有较好的控制效果。将预测控制思想应用于结构半主动控制中，为结构控制注入了新的思路，通过研究及仿真分析也说明了这种思想是可行的并且具有很大的发展前途。     

Modelling the effects of temperature and food on individual growth and reproduction of Daphnia and their consequences on the population level

Individual based simulations of population dynamics require the availability of growth models with adequate complexity. For this purpose a simple-to-use model (non-linear multiple regression approach) is presented describing somatic growth and reproduction of Daphnia as a function of time, temperature and food quantity. The model showed a good agreement with published observations of somatic growth (r² = 0.954, n = 88) and egg production (r² = 0.898, n = 35). Temperature is the main determinant of initial somatic growth and food concentration is the main determinant of maximal body length and clutch size. An individual based simulation was used to demonstrate the simultaneous effects of food and temperature on the population level. Evidently, both temperature and food supply affected the population growth rate but at food concentrations above approximately 0.4 mg Cl⁻¹ Scenedesmus acutus temperature appeared as the main determinant of population growth.

Four simulation examples are given to show the wide applicability of the model: (1) analysis of the correlation between population birth rate and somatic growth rate, (2) contribution of egg development time and delayed somatic growth to temperature-effects on population growth, (3) comparison of population birth rate in simulations with constant vs. decreasing size at maturity with declining food concentrations and (4) costs of diel vertical migration. Due to its plausible behaviour over a broad range of temperature (2–20 °C) and food conditions (0.1–4 mg Cl⁻¹) the model can be used as a module for more detailed simulations of Daphnia population dynamics under realistic environmental conditions.     

Application of extended distinct element method with lattice model to collapse analysis of RC bridges

This paper proposes a simple lattice model for collapse analysis of RC bridges subjected to earthquakes by using the extended distinct element method (EDEM). In the model, a concrete element consists of lumped masses connected to one another by springs, and a reinforcement bar is represented by a discrete model or an integrated model. The proposed lattice model is simple but its parameters are reasonably defined. It has fewer element nodes and connecting springs, which will be of benefit by shortening the CPU time. The processes to determine the initial stiffness of concrete and steel springs, the parameters of the constitutive model and the fracture criteria for springs are described. A re‐contact spring model is also proposed to simulate the re‐contact of the concrete after fracture of springs; and a general grid searching method is used to decrease the CPU time for judging re‐contact after fracture. The lattice model is assessed by numerical simulations and experiments. As an application, a damaged single‐column pier subjected to the Kobe Earthquake in 1995 is analysed by EDEM with the proposed model. The simulation results indicate that the proposed model predicts well qualitatively the collapse process of RC bridges. Copyright © 2003 John Wiley & Sons, Ltd.     

Lateral tidal mixing in the Antarctic marginal seas

Tidal mixing plays an important role in the modification of dense water masses around the Antarctic continent. In addition to the vertical (diapycnal) mixing in the near-bottom layers, lateral mixing can also be of relevance in some areas. A numerical tide simulation shows that lateral tidal mixing is not uniformly distributed along the shelf break. In particular, strong mixing occurs all along the Ross Sea and Southern Weddell Sea shelf breaks, while other regions (e.g., the western Weddell Sea) are relatively quiet. The latter regions correspond surprisingly well to areas where indications for cross-shelf exchange of dense water masses have been found. The results suggest that lateral tidal mixing may account for the relatively small contribution of Ross Sea dense water masses to Antarctic Bottom Water.