Mineralogy and chemistry of bentonite (?) deposits at Minjingu, Lake Manyara, North Tanzania

Olive green clays likely to be bentonitic in composition have been mineralogically and chemically studied. They occur in association with other lacustrine sediments at Lake Manyara. Radiocarbon dates from four diatom horizons indicate ages ranging from 12 Ka to 135 Ka suggesting a Mid-Holocene age. Middle Pleistocene age have been assigned to the ridged oncolites of Lake Manyara. The olive green coloured clays in the Manyara basin are known to occur in association with other lake beds including phosphorite deposits, stromatolites, bioturbated silty clays, partly silicified marls, conglomerates and olive green coloured opal beds. The results presented herein are from the olive green coloured clays. The olive green clays (bentonite?) are a result of devitrification or alteration of volcanic ashes and/or pyroclasts. The green clays occur in different forms as they are separated from each other by other lacustrine sediments. The alteration might have taken place in slightly different environments in terms of salinity and alkalinity. One of the top layer is friable and shows conchoidal fractures when dry. The other beds below in the lacustrine sequence are cemented with calcite and some dolomite as well as zeolites. The lowermost layer in the sequence is friable and shows cracks filled with coarse crystalline calcite. Mineralogically the bentonite is composed of the clay minerals illite, illite-smectite mixed layer clays, and chlorite. Other authigenic minerals include various zeolites (analcime, clinoptilolite, erionite and some traces of mordenite), opal, and fluorapatite. The clays have magnesium contents varying from 3.01% to 7.43%. The calcium contents vary widely due to presence or absence of one of the two minerals calcite or apatite. Trace elements like Ba, Ce, Sr, Zr are equally attributed to the presence of calcite and apatite. The formation of the illite-smectite mixed layer clays in an alternating manner with other lake sediments depicts different episodes of volcanic eruptions in the area. The mineralogical composition of smectites, zeolites, and opal in the green clays suggests a deposition of pyroclasts and volcanic ashes in a closed lake system with fluctuating levels. Due to evaporation alkalinity and salinity levels were fluctuating. The clays might have been bentonite which have undergone illitisation, a phenomena noted in other neighbouring rift basins.     

Late-Glacial and Early Holocene Environmental and Climatic Change at Lake Tambichozero, Southeastern Russian Karelia

High-resolution lithostratigraphy, mineral magnetic, carbon, pollen, and macrofossil analyses, and accelerator mass spectrometry ¹⁴C measurements were performed in the study of a sediment sequence from Lake Tambichozero, southeastern Russian Karelia, to reconstruct late-glacial and early Holocene aquatic and terrestrial environmental changes. The lake formed ca. 14,000 cal yr B.P. and the area around the lake was subsequently colonized by arctic plants, forming patches of pioneer communities surrounded by areas of exposed soil. A minor rise in lake productivity and the immigration of Betula pubescens occurred ca. 11,500 cal yr B.P. The rise in summer temperatures probably led to increased melting of remnant ice and enhanced erosion. The distinct increase in lake productivity and the development of open Betula-Populus forests, which are reconstructed based on plant macrofossil remains, indicate stable soils from 10,600 cal yr B.P. onward. Pinus and Picea probably became established ca. 9900 cal yr B.P.     

The nature of calcareous deposits along pan margins in eastern central Namibia

In a region along the western margin of the Kalahari in eastern Namibia and western Botswana, many pan basins have mainly calcareous deposits along part of their margins. These are typically lined by low vertical scarps. In Namibia, these pans are mainly located in dry river beds. The petrographical study of these deposits demonstrates that they consist of lacustrine sediments that have to a varying extent been affected by early‐diagenetic processes and by the formation of late‐diagenetic features. The original composition of the deposits ranges from highly calcareous sediments, typically with ostracod, diatom and charophyte remains, to entirely non‐calcareous diatomites. The deposits generally show an upward increase in total carbonate content, which is mainly a synsedimentary feature. The early‐diagenetic processes that affected the deposits include the formation of orthic siliceous nodules. At a later stage, secondary calcite enrichment occurred, leaving only the silica‐impregnated sections unaffected. This enrichment partly accounts for the upward increase in total carbonate content in some profiles and often resulted in the development of a highly calcareous surface horizon. Sepiolite and amorphous silica that are part of the groundmass of the deposits may also partly have formed at this stage. Late‐diagenetic features include various forms of secondary calcite and silica. This study of pan basins in eastern central Namibia indicates that a lacustrine rather than purely pedogenic origin should also be considered for calcareous deposits that commonly occur along pan margins in other parts of southern Africa. Copyright © 2002 John Wiley & Sons, Ltd.     

坝上高原安固里淖粒度年纹层与环境变化

在安固里淖湖心区获取一未扰动沉积物样柱，分析发现了由冬季风搬运物与湖心沉积共同形成的粒度年纹层，建立了纹层年表，恢复了安固里淖湖区8507aB.P，以来的环境变化过程。8507-5429aB.P。冬季风活动较弱，后期的所波动；5429-3244aB.P.冬季风活动较强，3244-2494aB.P。冬季风活动减弱；2494-1165aB.P。冬季风活动略有增强；1165aB.P以来，冬季风活动减弱。安固里小淖粒度年纹层反映的冬季风变化情况与我国北方地区同期的环境变化和海平面变化有很好的对应关系。     

南极菲尔德斯半岛古海蚀龛沉积的古环境记录

在西南极菲尔德斯半岛长城站地区发现有大量古海蚀龛 ,龛内保存有完整沉积剖面 ,通过对其中一个沉积剖面的粒度特征及元素组成的分析 ,确认该剖面是后期的湖相沉积 ,并据此恢复了距今 460 0年以来该地区古环境演化历史。结果表明 ,距今 40 0 0— 30 0 0年长城站区地表岩石化学风化作用较强烈 ,处于一个相对温暖的时期 ,这与湖泊沉积物、海洋沉积物等古环境记录载体的研究结果是一致的 ,证明古海蚀龛沉积可以作为研究南极无冰区和冰缘地区古环境演化历史的一种新的地质载体。     

Upper Oligocene-Lower Miocene shallowing-upwardlacustrine sequences controlled by periodic and non-periodic processes(Ebro Basin, northeastern Spain)

The lacustrine facies from two sections (Candasnos and Fraga) ofthe Oligocene-Miocene Torrente de Cinca lithostratigraphic Unit in thecentral part of the Ebro Basin (Spain) have been analysed to determine theinfluence of orbital parameters in lacustrine sedimentation. The unit ispredominantly composed of limestones and marls, and represents a shallowlacustrine freshwater system. The sedimentological features of the faciesstudied demonstrate that the lower part of the Candasnos section representsoffshore lacustrine subenvironments whereas the upper part, and the whole ofthe Fraga section, characterise marginal lacustrine areas. Series of stratalthickness variations of limestone, marl, and limestone/marl couplets fromboth sections have been analysed using spectral analysis. This shows thatinformation corresponding to periodic cycles only appears in the offshorefacies, that is to say, in the lower part of Candasnos section, and disappearsin the marginal facies where non-periodic cycles exist. Furthermore, thespectral analysis of the offshore facies highlights the existence of a peak inthe power spectrum with a period of around 7 (6.8 to 7.8) that can berecognised in the field as shallowing-upward lacustrine sequences.Magnetostratigraphic data from the Candasnos section allow us to establish atime span of 2,808 years for the limestone/marl couplet from the lower partof this section, and between 19,000 and 22,000 years for the periodic cycleidentified, thus representing the climatic precession cycle. Shallowingsequences from marginal areas do not correspond with any periodiccycle.     

中扬子区寒武纪层序地层研究

笔者建立了中扬子区寒武系层序地层格架，研究了中扬子区层序界面和体系域特点，分析了中扬子区层序样式的基本类型及其特征。共划分出2个二级层序、14个三级层序。寒武系下统划分了1个二级层序(SS3)、6个三级层序(SQ1—SQ6)，平均延时约5．0Ma；体系域颜色普遍较深，泥质含量较高，是一套良好的烃源岩。寒武系中上统划分出1个二级层序(SS4)、8个三级层序(SQ7—SQ14)，平均延时约2．9Ma；体系域颜色普遍较浅，云质含量较高，是一套良好的储集层。总体上H型样式为主，T型样式和TH型样式数量相当，反映寒武纪水体中等。二级层序体系域和三级层序体系域都表现出明显的南北向差异性。     

Exploration and discovery in Yellowstone Lake: results from high-resolution sonar imaging, seismic reflection profiling, and submersible studies

‘No portion of the American continent is perhaps so rich in wonders as the Yellow Stone’ (F.V. Hayden, September 2, 1874)Discoveries from multi-beam sonar mapping and seismic reflection surveys of the northern, central, and West Thumb basins of Yellowstone Lake provide new insight into the extent of post-collapse volcanism and active hydrothermal processes occurring in a large lake environment above a large magma chamber. Yellowstone Lake has an irregular bottom covered with dozens of features directly related to hydrothermal, tectonic, volcanic, and sedimentary processes. Detailed bathymetric, seismic reflection, and magnetic evidence reveals that rhyolitic lava flows underlie much of Yellowstone Lake and exert fundamental control on lake bathymetry and localization of hydrothermal activity. Many previously unknown features have been identified and include over 250 hydrothermal vents, several very large (>500 m diameter) hydrothermal explosion craters, many small hydrothermal vent craters (1–200 m diameter), domed lacustrine sediments related to hydrothermal activity, elongate fissures cutting post-glacial sediments, siliceous hydrothermal spire structures, sublacustrine landslide deposits, submerged former shorelines, and a recently active graben. Sampling and observations with a submersible remotely operated vehicle confirm and extend our understanding of the identified features. Faults, fissures, hydrothermally inflated domal structures, hydrothermal explosion craters, and sublacustrine landslides constitute potentially significant geologic hazards. Toxic elements derived from hydrothermal processes also may significantly affect the Yellowstone ecosystem.     

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.