THE APPLICATION OF MINIATURE UNMANNED AERIAL VEHICLE IN 25 NOVEMBER 2016 ARKETAO MW6.6 EARTHQUAKE

In order to complete the field investigation to the 25 November 2016 Arketao M_W6.6 earthquake, ultra-low altitude remote-sensing data were obtained from miniature unmanned aerial vehicle. The surface rupture surveying has important significance for earthquake research. This paper selects the macro-epicenter of Arketao as the study area. The pictures were obtained with DJI Phantom 3 professional input into the software, the Digital Elevation Model (DEM), Digital Orthophoto Map (DOM) were acquired based on photogrammetry method using the overlapped optical remote-sensing images of UAV. Using these data, we can identify surface ruptures that have vertical dislocation. We selected six feature points and drew the elevation profile. In the elevation profile map, we chose smooth part of the surface rupture sides and obtained the trend line. A stable point in the surface rupture was selected and the abscissa of the point was taken into the equation of two straight lines. Then subtracting the results of the two equations, we can get the vertical dislocation of the surface rupture. On this basis, we chose six feature points and determined their vertical dislocation, which are between 4.4cm and 10.4cm. What's more, taking Bulungkou Xiang in Xinjiang Uygur Autonomous Region for example, we speculated some surface ruptures that have vertical dislocation. It can provide a new method for identifying surface rupture in the field. In addition, we get DEM data of the Bulunkou area where ambient conditions are very poor, by using miniature unmanned aerial vehicle and taking 255 photos. Putting those photos into the EasyUAV software, we got the area digital elevation of 2cm resolution. Comparing these data with RTK data, we summarized some practical problems and solutions in the practical operation and evaluated the accuracy of miniature unmanned aerial vehicle data. The Pearson Correlation Coefficient is 0.996 6. In terms of absolute elevation, the average result of UAV and RTK differs by 156.96m. In terms of relative elevation, the average result of UAV and RTK differs by 9.74m. Compared with the previous test of Pishan County, there is a notable divergence in the results. It shows that the data accuracy will be affected to some extent in the cold weather in high elevations. The specific impact needs further exploration.     

透空式水平板波浪上托力分布

通过系列模型试验，对波浪上托力沿板宽分布进行了详细分析，提出对于透空式平板结构，发生较大冲击压强或上托力的分布主要分为均布型和局部冲击型两类，由此得到压强分布的计算公式。大量试验资料表明，该公式与实验值有着较好的一致性。     

煤炭采空区处理的新方法与实例分析

位于乌鲁木齐市南湖路以西的煤炭采空区面积达67 100.5m^2,区内构造从南到北主要由八道湾向斜和七道湾背斜组成,地层产状变化不大。该矿区开采较深,且采空区塌陷区有明显的地下水活动迹象。在对深孔大体积采空区注浆时,比较各种常见注浆治理方法,均存在不同的制约因素,故决定采用灌浆爆破压密法对采空区进行压实加固。经现场爆破试验,该区重复爆破次数在3～5次左右。灌浆爆破压密处理后,对不同土层进行取样对比分析,得到其相应密度（增加）及空隙比（减少）的变化分别为：杂填土14.1%,-7.9%;素填土5.9%,-3.3%;塌落煤层7.8%,-7.7%。根据压缩数据及现场测量,处理后的土体沉降2～4m,部分空体地段的沉降量达10～20m,治理效果明显。     

新疆东天山突出山铜铁矿床地球化学特征与地质意义

突出山铜铁矿床是东天山雅满苏石炭纪弧前-岛弧带中代表性的铁多金属矿床, 矿体呈透镜状、脉状、似层状赋存于上石炭统底坎尔组下亚组火山岩中。矽卡岩阶段包裹体均一温度为151℃~>380℃, 盐度为1.91%~23.18% NaCl_eq, 密度为0.76~1.09 g/cm³, 热液硫化物阶段包裹体均一温度为101℃~280℃, 盐度为0.35%~23.05% NaCl_eq, 密度为0.74~1.13 g/cm³, 表明成矿流体属于中-高温、中-低盐度、中-低密度的NaCl-H₂O体系。(绿泥石)绿帘石矽卡岩、磁铁矿(镜铁矿)矿石、含磁铁矿灰岩的稀土配分模式均为轻稀土相对富集的右倾型(LREE/HREE=2.85~9.21), 以出现负铕异常(δEu=0.22~1.09)和铈异常不发育为特征, 与底坎尔组火山岩相似, 表明成矿物质来源于底坎尔组火山岩。矿区矽卡岩可能是火山热液交代碳酸盐岩形成的, 成矿条件为中-高温、较为宽广的氧化还原环境, 矿床成因属火山热液交代型。     

近540 a东亚夏季海平面气压场的重建及其与数值模拟的比较

 基于中国东部地区旱涝分布和东亚夏季海平面气压存在密切关系的基础上,利用1470—2008年中国东部地区旱涝等级资料、1850—2008年东亚夏季海平面气压资料,运用主成分回归的方法重建了1470—2008年的东亚地区夏季海平面气压场,并对重建结果进行了检验,同时对1470—2008年东亚夏季海平面气压重建场和FGOALS_gl数值模式模拟的海平面气压场进行了对比分析。结果表明:①1850—2008年重建的东亚夏季海平面气压场在东亚夏季风关键区（中国内陆地区以及西北太平洋部分地区）重建效果相对于其他地区要好。②1470—2008年重建的东亚夏季海平面气压场主要存在高纬与中纬气压差异、海洋与陆地差异的两种空间分布型;1470—1999年FGOALS_gl数值模拟的东亚夏季海平面气压主要体现了海陆气压差异。③根据重建的东亚夏季海平面气压场定义的1470—2008年东亚夏季风指数的演变具有明显的阶段性,16世纪中期到17世纪初东亚夏季风偏强,17世纪偏弱,18世纪经历了“弱-强-弱-强-弱”的变化,19世纪则是“强-弱-强-弱”的变化,20世纪是明显的“弱-强-弱”变化。而1470—1999年数值模拟的东亚夏季风指数序列与重建序列的主要差异出现在16世纪末和18世纪末,两者的变化趋势相反,其他时段的变化趋势基本一致。     

离心模型试验中微型土压力盒土压力测定

土压力作为离心模型试验中重要的测试参数,受土压力盒的性能、离心机数据采集系统稳定性及外部环境等诸多因素的影响,准确地测量土压力较为困难。土压力盒作为土压力测试元件,其性能对土压力测量准确性有直接影响。为获得较为准确的土压力测试数据,结合离心机数据采集系统,选择两种常见的电阻应变式土压力盒。通过标定试验得出两种土压力盒砂标系数均小于出厂标定系数,Ⅰ型偏小64.75%,Ⅱ型偏小18.77%,Ⅱ型土压力盒与出厂数据的重合度比Ⅰ型好;在研究墙高10～30 m类扶壁式挡墙侧向土压力分布的离心模型试验中,与Ⅱ型土压力盒相比,Ⅰ型存在按出厂系数测得数据失真、灵敏度低和稳定性差的缺点。标定试验和离心试验结果表明,接入自行组建的数据采集系统的Ⅱ型土压力盒比接入静态应变数据采集系统的Ⅰ型土压力盒性能更佳。     

川西坳陷新页HF-1井须五段泥页岩吸附气含量主控因素及其定量预测模型

页岩气是一种重要的非常规天然气,其中相当一部分的天然气以吸附态存在。吸附气含量是页岩气资源评价和目标区优选的关键性参数,也是评价页岩是否具有经济开采价值的一个重要标准。为了探讨川西坳陷新页HF-1井须五段泥页岩吸附气含量主控因素,选取了该井须五段泥页岩样品进行同一温度下的等温吸附实验,获得页岩等温吸附特征曲线及Langmuir体积和Langmuir压力值,分析压力对页岩吸附气含量的影响程度,利用Langmuir模型计算地层压力条件下的吸附气含量。利用实验数据分析了新页HF-1井须五段泥页岩吸附气含量与比表面积、孔隙度、密度、成熟度、湿度和压力各单因素之间的相关关系,然后运用SPSS软件对吸附气含量的几个影响因素进行了主成分分析。结果表明：比表面积、湿度和压力是影响新页HF-1井须五段泥页岩吸附气含量的主要因素。最后建立了同时考虑这3个主控因素的页岩吸附气含量计算新模型。通过新模型可以计算出新页HF-1井须五段未知泥页岩的吸附气含量,计算结果与实测值之间相关系数高,结果准确可靠,是一种评价等温条件下页岩吸附气含量的好方法,对页岩吸附气含量评价具有一定的指导意义。     

谈滑坡勘察中的几个地下水压力问题

鉴于目前在滑坡勘察中对地下水压力问题尚有一些不够明确和难以确定之处,本文首先讨论地下水压力的分类及其概念,并简要叙述地下水压力的时、空变化和影响因素;然后结合实例分析不同条件下地下水压力在滑坡形成中的实际效用,并就地下水压力的确定问题发表了看法。     

Metamorphism of ultrahigh‐pressure eclogites from the Kebuerte Valley,South Tianshan,NW China: phase equilibria and P–T path

Eclogites from the Kebuerte Valley, Chinese South Tianshan, consist of garnet, omphacite, phengite, paragonite, glaucophane, hornblendic amphibole, epidote, quartz and accessory rutile, titanite, apatite and carbonate minerals with occasional presence of coesite or quartz pseudomorphs after coesite. The eclogites are grouped into two: type I contains porphyroblastic garnet, epidote, paragonite and glaucophane in a matrix dominated by omphacite where the proportion of omphacite and garnet is >50 vol.%; and type II contains porphyroblastic epidote in a matrix consisting mainly of fine‐grained garnet, omphacite and glaucophane where the proportion of omphacite and garnet is <50 vol.%. Garnet in both types of eclogites mostly exhibits core–rim zoning with increasing grossular (X_gr) and pyrope (X_py) contents, but a few porphyroblastic garnet grains in type I eclogite shows core–mantle zoning with increasing X_py and a slight decrease in X_gr, and mantle–rim zoning with increases in both X_gr and X_py. Garnet rims in type I eclogite have higher X_py than in type II. Petrographic observations and phase equilibria modelling with pseudosections calculated using thermocalc in the NCKMnFMASHO system for three representative samples suggest that the eclogites have experienced four stages of metamorphism: stage I is the pre‐peak temperature prograde heating to the pressure peak (P_max) which was recognized by the garnet core–mantle zoning with increasing X_py and decreasing X_gr. The P–T conditions at P_max constrained from garnet mantle or core compositions with minimum X_gr content are 29–30 kbar at 526–540 °C for type I and 28.2 kbar at 518 °C for type II, suggesting an apparent thermal gradient of ～5.5 °C km^?1. Stage II is the post‐P_max decompression and heating to the temperature peak (T_max), which was modelled from the garnet zoning with increasing X_gr and X_py contents. The P–T conditions at T_max, defined using the garnet rim compositions with maximum X_py content and the Si content in phengite, are 24–27 kbar at 590 °C for type I and 22 kbar at 540 °C for type II. Stage III is the post‐T_max isothermal decompression characterized by the decomposition of lawsonite, which may have resulted in the release of a large amount of fluid bound in the rocks, leading to the formation of epidote, paragonite and glaucophane porphyroblasts. Stage IV is the late retrograde evolution characterized by the overprint of hornblendic amphibole in eclogite and the occurrence of epidote–amphibole facies mineral assemblages in the margins or in the strongly foliated domains of eclogite blocks due to fluid infiltration. The P–T estimates obtained from conventional garnet–clinopyroxene–phengite thermobarometry for the Tianshan eclogites are roughly consistent with the P–T conditions of stage II at T_max, but with large uncertainties in temperature. On the basis of these metamorphic stages or P–T paths, we reinterpreted that the recently reported zircon U–Pb ages for eclogite may date the T_max stage or the later decompression stage, and the widely distributed (rutile‐bearing) quartz veins in the eclogite terrane may have originated from the lawsonite decomposition during the decompression stage rather than from the transition from blueschist to eclogite as previously proposed.     

Vertical heterogeneities of hydraulic aquitard parameters: preliminary results from laboratory and in situ monitoring

Abstract

A borehole is developed in a shallow multi-layered aquifer and used to derive the porosity, specific storage and hydraulic conductivity of the aquitard. Local values of hydrodynamical parameters are estimated from petrophysical analysis of core samples, and the empirical relationship between porosity and permeability. Vertical diffusivity is determined from the response of the aquitard to a loading cyclic signal using pressure records at different depths. Hydraulic conductivities deduced from the petrophysical analysis ranged from 10^?8 to 10^?10 m s^?1 and are comparable with those of facies of marine/lacustrine clay observed in samples. The permeability values calculated based on diffusivity are within the range 10^?9 to 10^?11 m s^?1 with a quasi-systematic bias of one order of magnitude. These values are average for a larger part of the aquitard and correspond to an integrated value. The methodology retained for the aquitard characterization is discussed with emphasis on the implications for the management of a complex aquifer system.

Citation Larroque, F., Cabaret, O., Atteia, O., Dupuy, A., and Franceschi, M., 2013. Vertical heterogeneities of hydraulic aquitard parameters: preliminary results from laboratory and in situ monitoring. Hydrological Sciences Journal, 58 (4), 912–929.