Probability density evolution method for seismic liquefaction performance analysis of earth dam

To investigate the seismic liquefaction performance of earth dams under earthquake loading, we present a new methodology for evaluating the seismic response of earth dams based on a performance‐based approach and a stochastic vibration method. This study assesses an earthfill dam located in a high‐intensity seismic region of eastern China. The seismic design levels and corresponding performance indexes are selected according to performance‐based criteria and dam seismic codes. Then, nonlinear constitutive models are used to derive an array of deterministic seismic responses of the earth dam by dynamic time series analysis based on a finite element model. Based on these responses, the stochastic seismic responses and dynamic reliability of the earth dam are obtained using the probability density evolution method. Finally, the seismic performance of the earth dam is assessed by the performance‐based and reliability criteria. Our results demonstrate the accuracy of the seismic response analysis of earth dams using the random vibration method. This new method of dynamic performance analysis of earth dams demonstrates that performance‐based criteria and reliability evaluation can provide more objective indices for decision‐making rather than using deterministic seismic acceleration time series as is the current normal practice. Copyright © 2016 John Wiley & Sons, Ltd.     

2022年青海门源M_(S)6.9地震前地电阻率变化分析北大核心CSCD

分别运用原始曲线分析法和归一化速率方法分析门源地震震中300 km范围内3个地电阻率台站数据变化。从原始曲线来看,金银滩台EW道临震前2个月出现大幅突跳及保留年变形态的趋势下降(-3.3%);山丹台NS道趋势下降(-1.9%)、EW道趋势上升(3.1%);武威小西沟台NS道趋势下降(-3.3%)、EW道趋势上升(2.8%),震后EW道趋势转平。而3个地电阻率台站归一化速率曲线在门源地震前均出现超过阈值的现象,但各自归一化速率形态存在差异。整点值突跳变化和日均值、月均值曲线加速变化、转折变化,尤其是上升至高值阶段出现的转折变化均可作为异常形态进行分析,以上变化不明显时需结合归一化速率方法提取异常。     

北斗三号卫星精密定轨中的光压模型研究

对于在轨运行的BDS (BeiDou Navigation Satellite System)卫星, 太阳光压是作用在卫星上主要的非引力摄动. 受多种因素的影响, 太阳光压摄动力难以精确建模, 是BDS卫星精密定轨和轨道预报过程中重要的误差来源. 由于ECOMC (Empirical CODE Orbit Model 1 and 2 Combined)模型兼顾了ECOM1 (Empirical CODE Orbit Model 1)和ECOM2 (Empirical CODE Orbit Model 2)模型的特点, 在模型中引入了较多的待估参数, 使得参数之间存在强相关性. 针对ECOMC模型的这一缺陷, 文中收集了2019年1月至2022年4月武汉大学分析中心提供的BDS-3卫星精密星历, 采用动力学轨道拟合方法得到了ECOMC模型的13个光压参数. 通过对该模型的光压参数进行时间序列分析, 分别给出了BDS-3 IGSO (Inclined Geosynchronous Orbit)和MEO (Medium Earth Orbit)卫星光压模型的参数选择策略. 并利用轨道拟合和轨道预报试验, 验证了光压模型参数选择策略的合理性. 结果表明, 采用改进型ECOMC模型进行BDS-3 IGSO和MEO卫星轨道拟合的效果最佳, 同时, 也能够提升BDS-3 IGSO和MEO卫星中长期轨道预报的精度.     

THE APPLICATION OF MINIATURE UNMANNED AERIAL VEHICLE IN 25 NOVEMBER 2016 ARKETAO MW6.6 EARTHQUAKE

In order to complete the field investigation to the 25 November 2016 Arketao M_W6.6 earthquake, ultra-low altitude remote-sensing data were obtained from miniature unmanned aerial vehicle. The surface rupture surveying has important significance for earthquake research. This paper selects the macro-epicenter of Arketao as the study area. The pictures were obtained with DJI Phantom 3 professional input into the software, the Digital Elevation Model (DEM), Digital Orthophoto Map (DOM) were acquired based on photogrammetry method using the overlapped optical remote-sensing images of UAV. Using these data, we can identify surface ruptures that have vertical dislocation. We selected six feature points and drew the elevation profile. In the elevation profile map, we chose smooth part of the surface rupture sides and obtained the trend line. A stable point in the surface rupture was selected and the abscissa of the point was taken into the equation of two straight lines. Then subtracting the results of the two equations, we can get the vertical dislocation of the surface rupture. On this basis, we chose six feature points and determined their vertical dislocation, which are between 4.4cm and 10.4cm. What's more, taking Bulungkou Xiang in Xinjiang Uygur Autonomous Region for example, we speculated some surface ruptures that have vertical dislocation. It can provide a new method for identifying surface rupture in the field. In addition, we get DEM data of the Bulunkou area where ambient conditions are very poor, by using miniature unmanned aerial vehicle and taking 255 photos. Putting those photos into the EasyUAV software, we got the area digital elevation of 2cm resolution. Comparing these data with RTK data, we summarized some practical problems and solutions in the practical operation and evaluated the accuracy of miniature unmanned aerial vehicle data. The Pearson Correlation Coefficient is 0.996 6. In terms of absolute elevation, the average result of UAV and RTK differs by 156.96m. In terms of relative elevation, the average result of UAV and RTK differs by 9.74m. Compared with the previous test of Pishan County, there is a notable divergence in the results. It shows that the data accuracy will be affected to some extent in the cold weather in high elevations. The specific impact needs further exploration.     

建筑在强震下横拉承压力钢筋负荷测量

在强震状态下,建筑物的横拉承压受力较为复杂,另外由于建筑物形状及在地震中受力面积大小不同,在强震下造成碰撞大小影响不一导致其横拉承压力的随机复杂性十分突出。传统的建筑承压负荷检测方法中钢筋负荷受力测量能力不足,检测结果易出现误差。将建筑钢筋的机械性能设为理想弹塑性,利用建筑物横拉承压力钢筋负荷测量方法,对不同结构、不同工况的建筑钢筋载荷的变化规律进行测试分析,结合建筑局部承压特点和整体结构聚力方式,设计横拉承压力钢筋负荷检测方法,并进行仿真实验,结果表明该方法模型所得数据更加精准,有良好的适用性。     

不同成因的海洋铁锰氧化物沉积物中稀土元素的地球化学特征

测试了具代表性的成岩型结核和水成型结壳的稀土元素,以研究稀土元素在这两种成因的海洋铁锰氧化物沉积物的特征及其与成因的关系。稀土元素特征表明稀土元素没有参与成岩型结核的成岩作用。即没有加入到1nm水锰矿中去,而是加入到无定形铁的氧化物、氢氧化物中去。同样,稀土元素也没有直接参与水成结壳的水成作用,即没有加入到锰、铁的氧化物、氢氧化物中去,而是与钙、磷相关。推测在很大程度上是先沉淀在钙、磷相中然后才加入到水成结壳中。稀土元素在这两种类型的沉积物的分布与其成因密切相关。     

风浪背景下舰船水压场信号的自适应AR模型预测滤波

为了有效地从风浪背景中检测舰船水压信号,首先根据舰船水压信号和波浪噪声的特点以时间序列的AR模型理论为依据,导出一种便于实现的自适应滤波器结构,并用NFTF自适应算法实现对舰船水压信号的预测滤波,取得了明显的效果.计算机仿真实验结果表明,给出的方法对抗波浪干扰具有良好的性能.     

基于CesiumJS的Android端三维地球研究与开发

CesiumJS作为一个能在二维和三维两个维度展示和管理动态地理数据的开源JavaScript库,为遥感领域的开发人员针对GIS应用的开发提供了一个成本更低且更易共享的解决方案.本文基于CesiumJS和Kotlin语言,在Android平台上将Android Native与Web页面相结合,研究并开发了一种集多种遥感...     

Measuring drop size distribution and kinetic energy of rainfall using a force transducer

The relatively high cost of commercially available raindrop spectrometers and disdrometers has inhibited detailed and intensive research on drop size distribution, kinetic energy and momentum of rainfall which are important for understanding and modelling soil erosion caused by raindrop detachment. In this study, an approach to find the drop size distribution, momentum and kinetic energy of rainfall using a relatively inexpensive device that uses a piezoelectric force transducer for sensing raindrop impact response is introduced. The instrument continuously and automatically records, on a time‐scale, the amplitude of electrical pulses produced by the impact of raindrops on the surface of the transducer. The size distribution of the raindrops and their respective kinetic energy are calculated by analysing the number and amplitude of pulses recorded, and from the measured volume of total rainfall using a calibration curve. Simultaneous measurements of the instrument, a rain gauge and a dye‐stain method were used to assess the performance of the instrument. Test results from natural and simulated rainfalls are presented. Copyright © 2000 John Wiley & Sons, Ltd.     

Application Study on Correction Method for Lag of Water Level Response to Earth Tide and Atmospheric Pressure

INTRODUCTIONBased onthe results gathered after manyyears of seismic groundwater observation,itisfoundthatthe water level in deep wells responds to the earth’s tide and atmospheric pressure and changesaccordingly,not onlyin amplitude ,but also in the phase lag by different degrees .Some phase lagslast onlyfor several minutes ,while some last aslong as more than one hour (Zhang Zhaodong,1988 ;Wang Chengmin,1990) .The result of this theoretical research shows that the phase lag response to…