Rare Earth Element and Trace Element Features of Gold-bearing Pyrite in the Jinshan Gold Deposit, Jiangxi Province

<正>Jinshan gold deposit is located in northeastern Jiangxi,South China,which is related to the ductile shear zone.It has a gold reserve of more than 200 tons,with 80%of gold occurring in pyrite. The LREE of gold-bearing pyrite is as higher as 171.664 ppm on average,with relatively higher light rare earth elements(LREE;159.556 ppm) and lower HREE(12.108 ppm).TheΣLREE/ΣHREE ratio is 12.612 and(La/Yb)_N is 11.765.These indicate that pyrite is rich in LREE.The(La/Sm)_N ratio is 3.758 and that of(Gd/Yb)_N is 1.695.These are obvious LREE fractionations.The rare earth element(REE) distribution patterns show obvious Eu anomaly with averageδEu values of 0.664,andδCe anomalies of 1.044.REE characteristics are similar to those of wall rocks(regional metamorphic rocks),but different from those of the Dexing granodiorite porphyry and Damaoshan biotite granite.These features indicate that the ore-forming materials in the Jinshan gold deposit derived from the wall rocks, and the ore-forming fluids derived from metamorphic water.The Co/Ni ratio(average value 0.38) of pyrite suggests that the Jinshan gold deposit formed under a medium-low temperature.It is inferred from the values of high-field strength elements,LREE,Hf/Sm,Nb/La,and Th/La of the pyrite that the ore-forming fluids of the Jinshan gold deposit derived from metamorphic water with ClF.     

青海德合龙洼金铜矿床地质地球化学特征

通过对青海德合龙洼金铜矿床矿石稀土元素、微量元素、铅硫同位素地球化学特征的研究,稀土总量(ΣREE)为14.22×10-6~176.54×10-6;LREE/HREE为2.37~12.19,轻稀土富集,重稀土亏损,大部分具有正铕异常;微量元素中Ba,Sr,Ti亏损,低场强元素含量较低,高场强元素Sc,Th,U,Zr,Hf,Nb,Ta中,Zr的质量分数最高,亲铁元素中V强烈富集;硫同位素δ(34S)=+2.2×10-3~+7.0×10-3,平均值为+4.98×10-3,均一化程度较高;铅同位素的数据点主要分布于上地壳铅和造山带铅之间;认为德合龙洼金矿的成矿物质来源主要为壳幔混合源。     

虚拟地理环境研究进展与理论框架

阐述虚拟地理环境的形成、发展与研究现状,并从"虚拟现实技术"与"虚拟现实"的相互关系探讨虚拟地理环境基本概念.从基本思想、系统结构、在线参与者社会组织水平、与GIS/数字地球的关系等角度,分析虚拟地理环境的特征.从数据、模型、表现以及协同4个方面,讨论了虚拟地理环境系统建设的关键技术与研究前沿.尝试建立了一个虚拟地理环境基本理论初步研究框架,认为在地理哲学思想层次应该重点研究复杂性人地系统、地理虚/实关系论、地理/遥感信息本体论,在地理/地理信息科学层次需要重点研究地理认知与思维、地理相似原理、地理计算模拟;同时讨论虚拟地理环境与面向"人"的地理信息科学、基于虚拟地理环境地理科学方法论,以及可计算人地关系的相关理论问题.     

涡阳花沟区28-5煤田孔粘钻事故的处理实践

介绍了涡阳花沟区28-5煤田孔粘钻事故的原因和处理方法,加强对泥浆比重、滤失性和流变性能的调整,对预防孔内发生粘钻事故有积极作用。     

真空预压法加固吹填土的孔隙水压力试验研究

利用真空预压法处理吹填土时,孔隙水压力变化常常反映土体固结程度的好坏。通过6个模型箱试验,监测不同排水系统下孔隙水压力变化,确定有效排水体间距。研究发现0.4m间距的土内孔压下降效果比0.8m间距的土内孔压下降效果好;排水体内的孔隙水压力与排水体类型有关,且距离排水体10 cm处土体内的孔隙水压力仅为排水体内孔隙水压力的1/2弱;滤膜排水系统中的吹填土孔隙水压力下降幅度最快,B型排水板系统次之,而砂井系统最慢。另外,对于吹填土而言,排水体有效间距介于0.4m与0.8m之间,其中滤膜的有效间距最大,B型排水板次之,砂井远小于前两者。     

低频电磁波与地倾斜传感器对地震预报分析与研究

5.12大地震对国家造成了一次重大的损失,则对地震预报的研究则显得尤为重要。本文认为地震发生的机理是板块挤压破裂学说。在地震动发生前后都会出现一些宏观或微观异常,在地震发生前其微观异常主要表现为电磁波、地壳倾斜、地应力等异常。本方通过对低频电磁波和地倾斜进行测量和研究,可通过数据多台站共享来进行地震预报分析。     

迭代法计算H2O-CO2-NaCl包裹体均一压力的改进及其应用

文章在宋玉财等于2007年提出的利用迭代法计算流体包裹体成分及均一压力的基础上,结合Duan等通过热力学模拟研究所获得的最新的热力学方程及H2O-CO2-NaCl包裹体pVtx计算程序,对宋玉财等所提出的H2O-CO2-NaCl包裹体成分及均一压力的迭代计算法提出了改进意见,同时对其进行了适当的修改。文章利用中-低温条件下求解CO2在盐水中的溶解度及摩尔体积的方程,提高了原方法的计算精度,并将原方法的适用范围（均一温度≥300 ℃）扩展到中_低温（0～260 ℃）、中_低压力（0～1 000×105Pa）以及中等盐度的范围。本方法适用于求解CO2部分均一温度高于笼形物融化温度、不含石盐子矿物且完全均一到水溶液相的H2O-CO2-NaCl包裹体。     

Influences of overburden pressure and soil dilation on soil nail pull-out resistance

Soil nailing is the most popular technique for stabilizing newly formed and existing sub-standard slopes in Hong Kong because of its economic and technical advantages. The nail–soil interface shear resistance is an important parameter in design of soil nailed structures. A three-dimensional finite element model was established and used for simulating soil nail pull-out tests. The finite element model was verified by comparing simulated results with measured data. The agreement between the experimental and simulated results in terms of both average pull-out shear stress and stress variation was very good. Using this finite element model, a parametric study was carried out to study the influences of the overburden pressure and soil dilation angle on the soil nail pull-out resistance. The simulated peak pull-out resistance was not directly related to the overburden pressure, which was coincident with the observations in laboratory pull-out tests. The simulated pull-out resistance increased significantly with the increase in dilation angle of the shearing zone. This analysis indicated that the constrained dilatancy of the nail–soil interface and the soil surrounding the nail contributed a lot to the development of peak pull-out resistance.     

塔里木盆地寒武系层状硅质岩与硅化岩的元素、δ30Si、δ18O地球化学研究

塔里木盆地寒武系发育层状硅质岩和硅化岩,层状硅质岩主要发育于塔东下寒武统深水沉积相区;硅化岩发育于塔东上寒武统斜坡沉积区与西部台地区寒武系白云岩中。根据显微结构特征,可将硅化岩分为放射状硅化岩与交代残余结构硅化岩两种。分析结果表明,层状硅质岩在Al—Fe-Mn三元图中位于正常海水沉积硅质岩区内,在微量元素平均地壳标准化图解上显示平缓右倾的特征;层状硅质岩Si同位素组成护。δ30Si为0．99‰～1．4‰,O同位素组成δ18O为21．4‰～24．4‰,与沉积型硅质岩相吻合,指示了正常海水沉积成因。硅化岩区别于层状硅质岩的典型特征是具有高U异常的特征;罗西斜坡放射状硅化岩具有较高的微量元素和稀土元素含量（∑REE为18．8～96．9μg／g）与较低的Si、O同位素值（δ18O和δ30Si值分别为15．8‰和1．7‰）;西部台地区交代残余结构硅化岩具有较低微量元素和稀土元素含量（∑REE为0．58～2．61μg／g）与较高的δ30Si（1．0‰～3．8‰）、δ18O（21．6‰～27．0‰）值特征。盆地东西部硅化岩的地球化学差异可能与硅化流体的温度差异有关,罗西斜坡放射状硅化岩硅化温度相对更高;另一方面,硅化过程对h430SiO4选择性较高,因而形成的交代石英具有较高的铲勘值。根据古城4井硅化岩包裹体均一温度与交代石英的O同位素值计算得到交代流体的δ18O值为9．1‰,该值与酸性岩浆水的δ18O值相似,指示了硅化流体可能来自于岩浆或变质水;以δ18O值（9．1‰）作为西部台地区硅化流体的O同位素值,计算得到西部台地区硅化岩硅化流体温度为101．3～158．5℃。根据石英O同位素温度计计算的硅化流体温度呈东高西低的趋势,指示了硅化流体可能来自台地东部。     

多圈管冻结壁形成和融化过程冻胀力实测研究

为获得多圈管冻结壁形成与融化过程中冻结壁内部冻胀力发展特性和孔隙水压力变化规律,进而分析冻结壁力学性态及安全性,在淮南某煤矿开展了冻结壁冻融过程中内、外部冻胀力和孔隙水压力的现场实测研究.实测结果表明:在地层冻融过程中,冻结壁内、外部形成了不均匀的冻胀应力,测试地层最大冻结压力达6.0 MPa,为初始地压的2.4倍;当井筒开挖至测试层位时地层冻结压力呈线性降低;随着浇筑外层混凝土井壁,冻结压力又有回升,当冻结壁融化后地层冻胀力为零,井壁恢复受水土压力作用.孔隙水压力变化经历了静止孔隙水压力和冻结过程的超静孔隙水压力两个阶段,超静孔隙水压力达到4.0 MPa,约为静止孔隙水压力的2.0倍.