川南煤田龙潭组煤系泥页岩气与煤层气组合模式及合采前景分析

文中研究的上二叠统龙潭组煤层及其顶底板泥页岩含气性特征、组合模式及合采对煤系气勘探开发意义重大。为改变煤层气产业低产低效长周期的现状,实现综合效益的目标,将龙潭组作为目标层进行研究;简述了川南煤田龙潭组含气泥页岩与煤层的组合模式,并初步探讨了上述组合模式合探合采的必要性、条件和前景,并提出了开展综合勘探开采的建议。     

物化探综合信息找矿方法在萤石矿找矿中的应用

福建光泽地区是闽北地区重要的萤石矿成矿远景区,具有寻找隐伏—半隐伏萤石矿的潜力,但是目前该区隐伏—半隐伏萤石矿找矿成果较少。通过对福建光泽地区I号萤石矿预测区开展物化探综合信息找矿方法应用,探讨物化探综合信息找矿方法在隐伏—半隐伏萤石矿找矿中的应用效果。结果表明: 区域水系沉积物测量和大比例尺化探剖面测量圈出的F、Ca等综合异常信息可协助筛选、确定萤石矿找矿目标区; 将高精度磁法测量与视电阻率联合剖面测量相结合,可进一步判断萤石矿控矿构造的位置和规模; 高密度电阻率法测量可协助确定控矿构造的深部延伸情况。地表检查和深部钻探验证表明: 区域化探、高精度磁法测量、视电阻率联合剖面测量和高密度电阻率法测量等物化探综合信息找矿方法组合,可指导隐伏—半隐伏萤石矿的找矿工作。     

Numerical evaluation of soft inter‐slab joint in concrete‐faced rockfill dam with dual mortar finite element method

Recently constructed concrete‐faced rockfill dams (CFRDs) often use soft inter‐slab joints to prevent axial compression‐induced extrusion damage in the concrete face. Due to the complexity of the multibody contact and the lack of information on the actual behavior of soft joints, it is highly challenging to numerically assess the effect of soft joints in CFRDs. In this paper, we present a numerical approach for the three‐dimensional modeling of CFRDs with hard and soft joints. A dual mortar finite element method with Lagrange multiplier is developed to treat the multibody contact in hard joints with impenetrability condition. The soft joint slab‐filler‐slab contact system is modeled using an equivalent contact interface approach, where the soft contact constraints are imposed using a perturbed Lagrange formulation. Through a series of laboratory tests, the mechanical behavior of soft joint is investigated. An extrusion model for the soft joint is presented and implemented in the dual mortar finite element method. The proposed numerical method is applied to the three‐dimensional analysis of Tianshengqiao‐1 CFRD. Despite the complex multibody contact and strong material and geometry nonlinearities in the CFRD, the proposed method is stable and capable of capturing salient characteristics of the CFRD. Numerical results show that in Tianshengqiao‐1, the employment of soft joints can effectively reduce the axial compression stress, thus greatly alleviating the risk of extrusion damage in the concrete face.     

基于最小能耗的海洋浮式平台位置轨迹优化

【目的】研究解决海洋大惯量浮式平台在复杂海况影响下所引起的振动冲击问题。【方法】采用逆运动学分析方法对平台回转位置进行优化研究,提出一种基于关节最小耗能的多目标轨迹优化算法。采用分段样条插值方法构造关节位置曲线,并建立关节能耗轨迹优化模型,采用粒子群算法实现对关节位置的优化搜索,从而得到基于平台转动最小耗能的位置优化轨迹。【结果与结论】所采用的轨迹优化方法能有效改善系统运行的平滑性,降低回转机构振动与冲击的影响程度,可为平台的振动与冲击主动控制提供必要的理论依据。     

对与我国金属矿产资源探寻有关基础研究的思考和讨论

在分析国内外对金属矿产资源的需求形势和我国金属矿产资源探明储量状况的基础上,提出了我国金属矿产资源探寻的基础研究目标:在我国现有国力情况下,与金属矿产资源探寻有关基础研究的近期目标是在大规模成矿作用研究基础上,为在我国东部大型矿集区千米级尺度深部发现现实可利用的资源储量提供科学依据和指导;中、长期目标主要是为西部大型矿集区雏形的圈定奠定科学基础,为国家战略性资源接替基地的寻找和确定服务。     

秦岭地区砂金分布特征与成矿机理

秦岭地区砂金矿床大部分分布在嘉陵江、汉水及其它们的支流流域。总结了砂金矿床分布特征,并将３种类型进行了对比。系统地对矿源、搬运、储存和富集的成矿模式、成因机理进行了研究。地貌与产构造运动在成矿中占有重要地位。     

伸缩缝刚度对大跨度悬索桥动力特性的影响

伸缩缝作为大跨度桥梁与引桥之间的重要连接构件,其抗推刚度及可能存在的变异性对主桥及引桥动力特性的影响不可忽略。本文建立了大跨度悬索桥及引桥的有限元模型,采用弹簧单元模拟加劲梁与引桥箱梁之间的伸缩缝,分析伸缩缝刚度对悬索桥及引桥自振特性及其地震响应的影响规律。分析结果表明:伸缩缝刚度对加劲梁的横弯振型、竖弯与纵飘耦合振型的频率有明显的影响;伸缩缝刚度的变化会导致加劲梁与引桥的振型相互耦合,同时这些振型的频率发生相应的突变,当伸缩缝刚度较大时,加劲梁两个竖弯与纵飘的耦合振型解耦成为独立的竖弯和纵飘振型;当引桥与悬索桥加劲梁的纵飘振型发生耦合时,在纵向和竖向地震作用下的悬索桥及引桥的地震响应达到最小。伸缩缝刚度对悬索桥动力特性影响的分析可为悬索桥的模态参数确认、损伤识别、抗震性能分析提供有价值的借鉴。     

Non‐linear seismic response of arch dams with contraction joint opening and joint reinforcements

A comprehensive study of non‐linear seismic response of arch dams with contraction joint opening and joint reinforcements has been conducted. A numerical model of contraction joint reinforcements is presented for optimization control of the joint opening. The objective of this control is to reduce the joint opening and expectantly to balance the sustained loads between the horizontal and the vertical components of the dam, thus avoiding an overstress in the cantilever while retaining the release of arch tensile stresses to some extent. Several parameter studies such as critical element size and required number of joints to be simulated for convergence are also performed. As an engineering application, a 292‐m high arch dam (the Xiaowan arch dam) and the Big Tujunga dam are analysed in detail. The results demonstrate that the joint opening and the corresponding load transfer from the arch to cantilever components of the dam during strong earthquakes are substantial. It is also evident that by providing sufficient strength and reinforcement flexibility, the joint opening can be controlled to some extent. However, the stress redistribution due to reinforcement control is not sufficient to avoid the overstress in the cantilever for the Xiaowan arch dam. Thus, alternative measures are discussed. Copyright © 2000 John Wiley & Sons, Ltd.     

工程建设项目的多测整合对策研究

以广州市开展联合测绘的改革成效为基础,进一步探索研究工程建设项目审批服务全链条中的测绘服务事项,重点关注优化测绘服务流程、统一测绘技术标准规范、强化对测绘成果的共享互认以及完善测绘行业管理制度等内容,通过优化测绘服务体系为审批制度改革"加速",为优化营商环境"助力",为全国各地全面推出"多测合一"改革提供可复制推广的经...     

基于神经网络的钢筋混凝土异型节点抗裂能力预测

利用神经网络方法研究了低周反复荷载作用下钢筋混凝土异型节点抗裂承载力与各主要影响因素之间复杂的非线性关系,建立了承载力的BP神经网络预测模型,预测结果与试验结果吻合较好。分析结果表明神经网络计算是钢筋混凝土构件力学性能研究中的一种很有潜力的新方法。