土钉面层配筋量计算原理及实例分析

本文在分析国内外大量文献资料的基础上,对土钉面层的受力机制进行了详细的讨论和分析,认为土钉面层主要受到钉体对面层的集中荷载及土体对面层的分布荷载作用。引入半弹性体和布辛涅奈斯克理论推导出了较为实用的土钉面层配筋量计算公式,并通过实例验证了该公式的正确性。     

A numerical study on 2-D compressive wave propagation in rock masses with a set of joints along the radial direction normal to the joints

An explosion in a borehole or an accidental explosion in a tunnel will generate a two-dimensional (2-D) compressive wave that travels through the surrounding rock mass. For the problem of 2-D compressive wave propagation in a rock mass with parallel joints in the radial direction normal to the joints, parametric studies on the transmission ratio and the maximum rebound ratio are performed in universal distinct element code. The variation of the transmission ratio with the ratio of joint spacing to wavelength is generalized into a characteristic curve, which can be used as a prediction model for estimating the transmission ratio. The relationship between the maximum rebound ratio and the influence factors is obtained in charts. The charts can be used as a prediction model for estimating the maximum rebound ratio. The proposed prediction models for estimating the transmission ratio and the maximum rebound ratio are applied to a field explosion test, Mandai test in Singapore. The minimum possible values of peak particle velocity (PPV) at the monitoring points are estimated by using the proposed prediction model for estimating the transmission ratio along the radial direction normal to the joints. On the other hand, the maximum possible values of PPV are estimated by using the proposed prediction model for estimating the maximum rebound ratio along the same radial direction. The comparison shows a good agreement between the field-recorded PPVs and the estimated range of PPVs given by the minimum possible PPVs and the maximum possible PPVs at the monitoring points in Mandai test. The good agreement between the estimated and field-recorded values validates the proposed prediction models for estimating peak particle velocity in a rock mass with a set of joints due to application of a compressive wave at the boundary of a tunnel or a borehole.     

河道洪水反流向演算过程迭代方法

在流域防洪调度中需要考虑河槽的调蓄作用,河道洪水反流向演算可以简化河库联合调度模型的求解;马斯京根法是河道洪水演算的常用方法,但不能直接用于解决洪水反流向演算问题;提出了马斯京根法和迭代试算相结合的过程迭代算法;实例表明方法是实用有效的。     

贵州天柱磨山—油麻坳金矿化带岩石矿物地球化学研究

研究了贵州天柱磨山—油麻坳金矿化带的成矿条件、控矿规律及地球化学特征。认为：金元素来源于地层;成矿流体具变质水和大气降水混合特征;褶皱翼部与断裂交汇带及层间破碎带等控制着矿体产出。成矿作用过程具沉积变质改造作用特点,多期次的构造变质作用对金元素的迁移聚集有着重要控制作用。     

地震折射和反射波联合勘探在桥址区工程勘察中的应用

用浅层地震折射和反射联合勘探方法在京—沪高速公路沭河桥址区进行隐伏断层和层位划分探测试验。试验是在宽约300m的水面上进行的,采用ES-2401高分辨率数字地震仪和“五小二高”的工作方法,综合利用折射和反射波信息,提高地质推断解释的可靠性,探测试验取得了良好的效果。     

比值—特征主成分混合分析提取金矿蚀变信息：以赣南遂川地区为例

在分析与金矿有关的两类蚀变岩的ＴＭ波谱特征的基础上,以赣南遂川地区为实验区,利用比值－特征主成分混合分析进行了金矿蚀变岩信息提取,为找矿预测和野外工作指明了方向。     

河北尚义侏罗系后城组节理研究

研究区侏罗系后城组地层发育着多组节理,根据其方位及相互关系,自早到晚分为５个节理组,其定向分别为１７４°、７７°、５８°、１４５°和１１９°,反映出节理形成的最大主压应力方向交替变化和偏转。岩石应变强度具有由弱至强,再由强至弱的演化趋势,而节理型式趋向不规则。区内节理多属构造成因,推测形成于侏罗纪末至白垩纪初近南北向的区域挤压过程。热液活动在区内节理形成之后,而后１１９°方位节理组发生右行走滑。     

石油钻杆接头水基淬火的研究

对石油钻杆接头水淬热处理技术进行了研究分析。介绍了水基淬火和油基淬火后石油钻杆接头的硬度、硬度均匀性的对比试验;不同条件下的淬火液对钻杆接头冷却速度的影响。研究表明,水基淬火方式能更好地提高钻杆接头马氏体化程度,从而提高淬火质量。     

超深地下连续墙施工中若干问题探讨

随着地下空间工程的不断发展,超深地下连续墙的应用越来越多,施工的风险也越来越高。结合工程实践,对超深地下连续墙施工方法及施工中存在的若干问题进行探讨、分析,并提出相对应的解决措施。通过采用先进合理的解决措施,超深地下连续墙的施工是完全能达到设计要求的。     

地下连续墙技术在深基坑围护中的应用

结合某高层建筑深基坑围护的工程实例,介绍了地下连续墙施工技术在深基坑围护工程中的具体应用,阐述了地下连续墙施工的工艺流程和技术要点,提出了施工的注意事项和特殊问题的预防处理方法。