基于广义Kопытов模型及乙型水驱曲线的综合预测法

将广义Kопытов预测模型和乙型水驱曲线方法有机的结合起来，得到了油田开发中后期——递减时期的一种预测水驱开发油田的含水率、产油量、产水量及其相应的累积产量随开发时间变化的方法，此方法克服了在水驱油田预测开发指标中二者所存在的局限性。     

Gold Mineralization and Occurrence of Sinter in the Hoshino Area, Fukuoka Prefecture, Japan

Abstract. Several epithermal gold deposits occur in the Hoshino area, which is located in the western end of the late Cenozoic Hohi volcanic zone, north‐central Kyushu, Japan. The area is characterized by intermediate to felsic extrusive rocks of Pliocene age. In the Hoshino area, the shallow manifestation of the hydrothermal activity is exposed on the surface. Several outcrops of sinter are still preserved on the top of hydro thermally altered volcanic rocks, and high‐grade gold‐bearing quartz veins occur on the surface at lower levels. The hydrothermal alteration resulted into well‐developed alteration zones. The zonal alteration pattern, primarily of near‐neutral pH type, is characterized by the outer smectite zone of a lower temperature, and the inner mixed layer minerals zone of a higher temperature. Quartz vein‐related or fracture‐controlled alteration, is represented by the occurrence of interstratified illite/smectite and K‐feldspar, suggesting a potassium‐enriched alteration. The mineralization in the Hoshino area is recognized on the surface by the occurrence of gold‐bearing quartz veins distributed mainly in the mixed layer minerals zone. The fracture system related to the gold mineralization is mainly characterized by NW‐SE trend. The alteration pattern and the mineralogical composition of the veins suggest that the mineralizing fluids had near‐neutral pH and the mineralization is of low‐sulfidation‐type. Fluid inclusion data and textures observed in quartz veins indicate that gold precipitated during boiling. The chemical composition of quartz veins shows that high‐grade gold‐bearing quartz veins are characterized by higher content of Al₂O₃, K₂O and Rb. Several outcrops of silica‐sinters are distributed on the top of the mixed layer minerals zone. Although their structures are not very well preserved, because of later silicification, the Hoshino sinters still show characteristic textures identical to those observed in modern sinters, such as the presence of plant fossil incorporated into the sinters, the strongly developed depositional laminations and the columnar structures perpendicular to the depositional surfaces. Quartz is the only silica mineral constituting the Hoshino sinters presently. The conversion of amorphous silica into quartz was probably governed by higher temperatures resulting from later hydrothermal activity. This later hydrothermal activity is reflected by the intense silicification affecting mainly the lower parts of the sinters and also by the presence of quartz veins cutting the sinters. The distribution of sinters in the Hoshino area is very significant. The presence beneath the sinters of concealed high‐grade gold‐bearing quartz veins should be highly considered and exploration work is strongly suggested.     

疏勒河流域昌马灌区泉水量预测分析

疏勒河流域农业灌溉主要采用地表水灌溉 ,泉水为该区农业灌溉的主要水源之一 ,该文利用 2 0世纪 90年代的测流资料 ,采用有限差分方法对疏勒河中游泉水量的变化趋势进行预测分析 ,结果显示 ,随着时间的延长 ,泉流量呈逐渐减小的趋势 ,但下降梯度逐渐变小 ,最终趋于稳定     

公婆泉盆地局部排泄源氧化还原属性与铀矿化关系探讨

在系统分析公婆泉盆地地质背景、水文地质条件的基础上，对该区局部排泄源氧化还原属性与铀矿化的关系进行了探讨。研究结果表明，局部排泄源的存在对铀矿化具有重要作用，当局部排泄源属于还原性质时，铀矿体常常分布于该排泄源上游；若属氧化性质，排泄源铀矿体通常位于其下游或附近。公婆泉盆地存在相对氧化和相对还原的二种局部排泄源，北骆驼泉区的沙泉沟与平沙地、麻黄沟、北骆驼泉沟排泄源之间应为有利的铀矿化地段。     

鞍山市西郊区水位预测

根据鞍山市西郊区水文地质条件，建立了双层渗流二维平面系统的数学模型：应用Galerkin有限元法求解模型，从模型的计算结果可见该区观测点水位绝对误差较小，达到了规范要求的计算精度，同时，在此区内有一个大漏斗，在东南的铁西一带也有一个小漏斗。由于铁西一带是主要开采水源区，开采水量较大，所以漏斗逐渐向外扩大且水位有明显下降的趋势。这一变化规律与实际水位一致，说明计算水位基本上反映了实际水位空间变化的规律。因此根据模拟参数利用此模型对该地区进行了水位预测，共预测了四年的水位状况，并依据水位的预测结果对该区的水资源开发利用提出了合理建议。     

大同市区二十年地下水动态研究

本文首先分析了大同市地下水开采与地下水降深之间的对应关系，同时分析了影响地下水动态的其它因素，然后将地下水开采和大气降水量这两个影响地下水动态的主要因素与地下水动态进行复相关计算，求出相关方程，并进行不同开采量的地下水降深预测，最后根据这些地下水动态研究结果提出了解决大同市水问题几项对策建议。本文的研究结果同时表明，地下水动态研究非常必要且现实意义明显。通过动态变化可以了解地下水的补排及储水介质的变化情况，利用动态变化规律可以预测水文地质条件的变化趋势，根据地下水动态变化特点可采取有针对性的、灵活的取水方案。可以说，地下水动态研究成果在水资源的开发、利用、保护中具有极大的可利用价值。     

Fluid flow and mineralization of Youjiang Basin in the Yunnan-Guizhou-Guangxi area, China

Comprehensive studies, based on isotope geochemistry of C, H, O, S and Sr, chronology, common element and trace element geochemistry of fluid inclusions for the epithermal Au, As, Sb and Hg deposits in the Youjiang Basin and its peripheral areas, suggested that the ore fluid was the basin fluid with abundant metallic elements and the large-scale fluid flow of the same source in the late Yenshan stage was responsible for huge epithermal mineralization and silicification. The ore fluid flowed from the basin to the platform between the basin and the platform and migrated from the inter-platform basin to the isolated platform in the Youjiang Basin. The synsedimentary faults and paleokast surface acted respectively as main conduits for vertical and lateral fluid flow.     

Timing of deformation in the Norseman-Wiluna Belt, Yilgarn Craton, Western Australia

Establishing relative and absolute time frameworks for the sedimentary, magmatic, tectonic and gold mineralisation events in the Norseman-Wiluna Belt of the Archean Yilgarn Craton of Western Australia, has long been the main aim of research efforts. Recently published constraints on the timing of sedimentation and absolute granite ages have emphasized the shortcomings of the established rationale used for interpreting the timing of deformation events. In this paper the assumptions underlying this rationale are scrutinized, and it is shown that they are the source of significant misinterpretations. A revised time chart for the deformation events of the belt is established. The first shortening phase to affect the belt, D₁, was preceded by an extensional event D_1e and accompanied by a change from volcanic-dominated to plutonic-dominated magmatism at approximately 2685–2675 Ma. Later extension (D_2e) controlled deposition of the ca 2655 Ma Kurrawang Sequence and was followed by D₂, a major shortening event, which folded this sequence. D₂ must therefore have started after 2655 Ma—at least 20 Ma later than previously thought and after the voluminous 2670–2655 Ma high-Ca granite intrusion. Younger transcurrent deformation, D₃–D₄, waned at around 2630 Ma, suggesting that the crustal shortening deformation cycle D₂–D₄ lasted approximately 20–30 Ma, contemporaneous with low-volume 2650–2630 Ma low-Ca granites and alkaline intrusions. Time constraints on gold deposits suggest a late mineralisation event between 2640–2630 Ma. Thus, D₂–D₄ deformation cycle and late felsic magmatism define a 20–30 Ma long tectonothermal event, which culminated with gold mineralisation. The finding that D₂ folding took place after voluminous high-Ca granite intrusion led to research into the role of competent bodies during folding by means of numerical models. Results suggest that buoyancy-driven doming of pre-tectonic competent bodies trigger growth of antiforms, whereas non-buoyant, competent granite bodies trigger growth of synforms. The conspicuous presence of pre-folding granites in the cores of anticlines may be a result from active buoyancy doming during folding.     

济宁二号矿孤岛工作面冲击矿压危险及其控制

孤岛工作面及其周围巷道附近应力集中程度高,顶板运动剧烈,再加上地质构造的影响,采深较大时,冲击危险程度就高,很容易引发冲击矿压。《煤矿安全规程》要求孤岛工作面按冲击矿压危险工作面来管理。孤岛工作面冲击矿压危险检测预报及控制的技术是先分析冲击危险程度,确定冲击危险指数,提出早期预报;采用电磁辐射和钻屑法进行及时预报;采用卸压爆破进行处理,并采用电磁辐射和钻屑法检验防治措施的效果。实践证明,这套技术安全、可靠、有效,能够保证工作面的安全高效生产。     

Copper-Polymetal Metallogenic Series and Prospecting Perspective of Eastern Section of Gangdise

Geological, geophysical, geochemical and remote sensing comprehensive studies show that big ore-prospecting potentiality is contained in the eastern section of the Gangdise Mountains, Tibet.There are various mineralization types with dominant types of porphyry and exhalation. According to their relations with tectonic evolution, they are divided into four kinds of metallogenic series as follows:magnmtic type (Cr, Pt, Cu, Ni) and exhalation type (Cu, Pb, Zn, Ag) ore deposit series related to Neo-Tethys oceanic crust subduction action (125-96 Ma); epithermai type (Au, Ag, Pb, Zn, Sb), altered fractured rock type (Cu, Mo) and skarn rock type (Cu) ore deposit series related to arc-continental collision; porphyry type (Cu, Mo), cryptoexplosion breccia type (Cu, Au, Pb, Zn), shear zone type (Au, Ag, Sb) and skarn rock type (Cu, Fe) ore deposit series with relation to post-orogenic extensional strike-slip. From subductive complex to the north, zoning appears to be crystallization differentiation type (segregation type)-shear zone type (altered rock type)-skarn rock type, epithermai type-porphyry type-porphyry type and exhalation type-exhalation type-hydrothermai filling-replacement type.The ore deposit is characterized by multi-places from the same source, parity and multi-stage, hypabyssal rock from the deep source and poly genetic compound as a whole.