鄂尔多斯深盆气与铀矿化关系初探

深盆气是非常规的天然气藏。鄂尔多斯深盆气与铀矿化有密切关系，上古生界气源层铀含量丰富、易浸出，故也为铀源层。在铀源层成岩时所形成的压榨水(即深层水)，经燕山期热事件快速增温增压，使铀的溶解度大大增加。此时也正是盆地生气高峰期，气压远远大于水压，气体推动深层水沿断裂向上扩散。在上覆透水层，由于地表水的参与形成复杂的气水地球化学垒，使铀沉积成矿。本文还总结了该类型铀矿的找矿准则。     

小秦岭金矿含金石英脉中黄铁矿晶体的表面微形貌研究

利用微分干涉显微镜、扫描电镜、透射电镜等对小秦岭金矿含金石英脉中黄铁矿晶体的表面微形貌进行了研究。黄铁矿晶体的{210}面上发育自由生长层，表明{210}面是F面，其生长机理受二维成核层生长所制约。除简单的五角十二面体外，其他形态黄铁矿晶体的{210}面上也发育有自由生长层。{210}面上的正条纹有些是由{100}面上生长层的边缘台阶在{210}面上叠堆形成，另一些正条纹则是{210}面上生长层边缘台阶堆叠的产物。透射电镜和电子衍射花样研究表明，负条纹黄铁矿晶体是由30～50nm大小的核团经自动定向附生作用形成，每个核团不是单晶体，而是由许多早先在溶液中形成的小微晶聚合而成。这些特征表明负条纹黄铁矿晶体是在溶液过饱和度极高和温度梯度小的理想环境中形成，它的形成与杂质无关。PBC理论和唐纳-哈克定律能较好地解释自然界中黄铁矿晶体{100}面上普遍发育自由生长层、而{210}面上自由生长层极为罕见的原因。除日本释迦内矿区黑矿之上的浮岩凝灰岩中产生出负条纹黄铁矿晶体外，在石英脉型金矿床中也有负条纹黄铁矿晶体产出。     

内蒙古镁铁质-超镁铁质岩型铜镍矿床成矿条件与找矿远景分析

按构造环境控岩控矿特点,划分区内铜镍型矿成矿(岩)带,分析成矿条件,研究了与该类矿床成矿有关的镁铁质岩、超镁铁质岩分布规律及铜镍硫化物成矿特征,提出了找矿方向和建议.     

石岭沟-拐道沟铜-铅-锌多金属成矿带成矿地质条件分析

成矿带位于北秦岭北部晚元古代-早古生代裂谷带南缘的变质火山岩区，受油房-皇台断裂的次级分支断裂及燕山-印支期的侵入岩体及次火山岩脉的联合控制，成矿地质条件与甘肃白银厂铜-铅-锌矿田相类似，成矿带内地表已发现多条铜-铅-锌矿(化蚀变)体，找矿潜力较大，只要进一步深入开展工作，有望找到与白银厂铜-铅-锌矿田相类似的大型一超大型铜-铅-锌多金属矿床。     

太白县大河滩铜-金-多金属矿点成矿条件及找矿前景分析

大河滩铜-金-多金属矿点处于两大板块碰撞对接带，其间有庞家河一马鞍桥近EW向铁-金矿带和斜峪关一二郎坝NE向铁-贵金属矿带通过，具有多次成矿作用叠加的特点，可与江西“银山式”大型铜-金多金属矿床的成矿条件、赋矿特征、成矿时代和矿化类型类比，具备形成大型矿床的成矿地质条件，找矿前景较大。     

会泽超大型铅锌矿床成矿时代研究

云南会泽超大型铅锌矿床由麒麟厂和矿山厂两个独立的铅锌矿床组成。利用两组同源矿物组合Rb Sr等时线方法测定了麒麟厂6号矿体的成矿时代,测定结果分别为(225 1±2 9)Ma和(225 9±3 1)Ma,根据已知的分布于该矿床北部和西南部分布的峨眉山玄武岩成岩时代为250Ma左右,有多个火山喷发旋回,显示多期次的喷发活动,认为川—滇—黔成矿区内铅锌成矿作用与峨眉山玄武岩岩浆活动存在成因联系。     

扬子地台西南缘传统型铂族矿产地质特征

传统型铂族矿产，系指与镁铁质岩浆成矿作用有关的铂族矿产资源。华力西运动时期，扬子地台西南缘沿超壳深断裂带发生的大陆裂谷作用，为来自上地幔的镁铁质(拉斑玄武岩质)岩浆的上涌和侵位提供了极为有利的前提条件。含铂基性超基性岩的时空分布，受到大陆裂谷作用的主要发生发展时期和裂谷活动带的控制。通过对典型矿床特征及其成矿作用的探讨，论述了扬子地台西南缘主要的铂族矿床类型；并从四维成矿的角度，阐述了对区域成矿规律的一些基本认识。     

Hydrothermal Mineralization on the Mesoproterozoic Passive Continental Margins of China： A Case Study of the Langshan-Zha＇ertaishan Belt, Inner Mongolia, China

Most ore-forming characteristics of the Langshan-Zha‘ertaishan hydrothermal exhalation belt, which consists of the Dongshengmiao, Huogeqi, Tanyaokou and Jiashengpan large-superlarge Zn-Pb-Cu-Fe sulfide deposits, are most similar to those of Mesoproterozoic SEDEX-type provinces of the world. The characteristics include: (1) All deposits of this type in the belt occur in third-order fault-basins in the Langshan-Zha‘ertaishan aulacogen along the northern margin of the North China Platform; (2) these deposits with all their orebodies hosted in the Mesoproterozoic impure dolomite-marble and carbonaceous phyllite (or schists) have an apparent stratabound nature; ores display laminated and banded structures, showing clear depositional features; (3) there is some evidence of syn-sedimentary faulting, which to a certain extent accounts for the temporal and spatial distribution and the size of the orebodies in all deposits and the formation of intrabed conglomerates and breccias; (4) they show lateral and vertical zonation of sulfides; (5) The Cu/(Pb Zn Cu) ratio of the large and thick Pb Zn Cu orebodies gradually decreases from bottom to top; and (6) barite is interbedded with pyrites and sometimes with sphalerite. However, some characteristics such as the Co/Ni radio of the pyrites, the volcanism, for example, of the Langshan-Zha‘ertalshan metallogenic belt, are different from those of the typical SEDEX deposits of the world. The meta-basic volcanic rock in Huogeqi, the sodic bimodal volcanic rocks in the Dongshengmiao and potassic bimodal-volcanic rocks with blastoporphyfitic and blasto-glomeroporphyritic texture as well as blasto-amygdaloidal structure in the Tanyaokou deposits have been discovered in the only ore-bearing second formation of the Langshan Group in the past 10 years. The metallogeny of some deposits hosted in the Langshan Group is closely related to syn-sedimentary volcanism based on the following facts: most of the lead isotopes in sphalerite, galena, pyrite, pyrrhotite and chalcopyrite plot on both sides of the line for the mantle or between the lines for the mantle and lower crust in the lead isotope composition diagram; cobalt content of some pyrites samples is much higher than the nickel content (Co/Ni= 11.91-12.19). Some volcanic blocks and debris have been picked out from some pyritic and pyrrhotitic ores. All Zn-Pb-Cu-Fe sulfide orebodies in these deposits occur in the strata overlying metamorphic volcanic rocks in the only ore-bearing second formation. In the Jiashengpan deposit that lacks syn-sedimentary volcanic rocks in the host succession only Pb and Zn ores occur without Cu ore, but in the Dongshengmiao, Tanyaokou and Huogeqi deposits with syn-sedimentary volcanic rocks in the host succession Cu ores occur. This indicates a relatively higher ore-forming temperature. The process of synsedimentary volcanic eruption directly supplied some ore-forming elements, and resulted in secular geothermal anomaly favorable for the circulation of a submarine convective hydrothermal system, which accounts for the precipitation of deep mineralizing fluids exhaling into anoxidic basins along the syn-sedimentary fault system in the Langshan-Zha‘ertai rift. The Dongshengmiao, Tanyaokou, and Huogeqi deposits hosted in the Langshan Group appear to be a transitional type of mineral deposit between SEDEX and VMS-types but with a bias towards SEDEX, while the Jiashengpan deposit hosted in the Zha‘ertai Group is of a characteristic SEDEX type. This evidence, together with other new discoveries of Mesoproterozoic volcanic rocks and the features of lithogeny and metallogeny of the Bayun Obo deposit in the neighborhood emphasize the diversity, complexity and uniqueness of the Mesoproterozoic Langshan-Zha‘ertal-Bayun Obo ore belt.     

Polymetallic Mineralization at the Suttsu Vein-type Deposit, Southwestern Hokkaido, Japan

Abstract. The Suttsu polymetallic vein-type deposit, hosted by tuff, tuff breccia and shale of the Miocene Kunnui Formation and propylitized hornblende-augite andesite, is located in southwestern Hokkaido, Japan. It has been exploited and explored for Cu, Pb, Zn and Ag until 1962.
In this study, we examined K-Ar ages, ore mineralogical characteristics and fluid inclusions to obtain new data for the deposit.
The K-Ar ages on sericite indicate that the polymetallic mineralization occurred in Late Miocene (8.1–5.7 Ma). The polymetallic banded ore from the Ohkubo vein is characterized by an abundance of Au, Ag, Sn, Bi, in, Se and Te. These metals are mainly ascribed to electrum (30.3–37.8 atom% Ag), Se-bearing pavonite (8.5–9.5 wt% Se), gustavite-lillianite solid solution, Se-bearing bismuthinite (5.0–5.3 wt% Se), kawazulite, cassiterite, Sn-bearing chalcopyrite (3.3–4.2 wt% Sn), In-bearing stannite, stannite-chalcopyrite solid solution, and In- and Sn-bearing sphalerite (2.6–8.4 wt% In and 1.8–4.3 wt% Sn), occurring in narrow bands of the ore. The In- and Sn-bearing sphalerite likely forms a sphalerite-roquesite-stannite solid solution with the contents of roquesite and stannite being about 2–9 and 2-A mole%, respectively. Temperatures and salinities (in wt% NaCl equiv.) of the ore fluids are estimated to be 180-250C and 3–4 wt%, respectively. The Sn-bearing chalcopyrite therefore probably precipitated metastably. The geologic and mineralogical features suggest that pre-Tertiary basement rocks rich in organic material underlie the Miocene Kunnui Formation nearby the deposit and that they contributed to local and temporary reduction of magnetite-series magmas favorable for the early stage tin-polymetallic mineralization.     

“Three-Component” Digital Prospecting Method：A New Approach for Mineral Resources Quantitative Prediction and Assessment

“Three-component” method consists of three clase-connected aspects: geological anomaly,diversity of mineralization and mineral deposit spectrum. All these three concepts are not new separately, but it is a new approach to combine these three aspects in one single concept for quantitative mineral resources prediction and assessment and it is also the first time to conduct a more detailed study in each aspect. Investigation and clarification of geological anomalies, diversity of mineralization and spectrum of mineral deposits are realized by digitization and quantification of ore forming controlling factors, oreexisting symbols or marks, characteristics of mineralization and regulation of ore-genesis and laws of distribution. These procedures lead to construction of a “digital model“ for mineral resources prediction andassessment.