通用洪水预报模型库设计建设研究

在介绍洪水预报模型库的基本概念和性质的基础上，分析了各类洪水预报模型的输入、输出数据类型，规定了各类数据文件格式，设计了洪水预报模型库的通用数据接口，并在中国洪水预报系统中实现了通用洪水预报模型库的建设。     

利用钾长石粉水热合成13X沸石分子筛的实验研究

对综合利用钾长石提钾工艺中的重要高附加值副产品13X沸石分子筛的合成进行了实验研究。对福建沙县的钾长石粉加入配料NaCO3进行焙烧实验，确定培烧的最佳工艺参数为：钾长石粉：NaCO3=1：1．30(摩尔比)，焙烧温度为845℃，焙烧时间为150min；优化的水热合成条件为M2O／SiO2(mo1)=1．50，H2O／M2O(mo1)=40．0，合成时间为8h，晶种加入量为9．0％。对合成样品化学成分分析、X射线物相分析、红外光谱分析、扫描电镜分析表明，合成13X沸石分子筛结晶完好，性能优良．水热反应经由溶解水合反应和聚合浓缩反应两大阶段。     

夏季红枫湖地区农田土壤-大气界面汞交换通量的初步研究

采用动力学通量箱法(Dynamic Flux Chamber)与高时间分辨率大气测汞仪联用技术对贵州红枫湖地区土壤-大气界面间汞交换通量进行了初步研究.结果显示,红枫湖地区土壤-大气界面间汞交换通量变化范围为-8.6 ng～215.3 ng@m-2@h-1,平均27.4士40.1 ng/m2@h(n=255);且土壤与大气界面间的汞交换是双向的既有土壤汞的释放,又有大气汞的沉降,主要以土壤汞的释放为主(n释放=253,n沉降=2n).土壤汞的释放通量与土壤温度、气温、光照强度有强相关关系,相关系数分别为0.80、0.83、0.74.     

Transformation of garnet epidote amphibolite to eclogite, western Dabie Mountains, China

Omphacite and garnet coronas around amphibole occur in amphibolites in the Hong'an area, western Dabie Mountains, China. These amphibolites consist of an epidote–amphibolite facies assemblage of amphibole, garnet, albite, clinozoisite, paragonite, ilmenite and quartz, which is incompletely overprinted by an eclogite facies assemblage of garnet, omphacite and rutile. Coronas around amphibole can be divided into three types: an omphacite corona; a garnet–omphacite–rutile corona; and, a garnet–omphacite corona with less rutile. Chemographic analysis for local reaction domains in combination with petrographical observations show that reactions Amp + Ab + Pg = Omp +Czo + Qtz + H₂O, and Amp + Ab = Omp ± Czo + Qtz + H₂O may lead to the development of omphacite coronas. The garnet–omphacite–rutile corona was formed from the reaction Amp + Ab + Czo + Ilm ± Qtz = Omp + Grt + Rt + H₂O. In garnet–omphacite coronas, the garnet corona grew during an early stage of epidote amphibolite facies metamorphism, whereas omphacite probably formed by the reactions forming the omphacite corona during the eclogite facies stage. It is estimated that these reactions occurred at 0.8–1.4 GPa and 480–610 °C using the garnet–clinopyroxene thermometer and omphacite barometer in the presence of albite.     

In the Critical Zone: Geography at the U.S. Geological Survey

Geography is again becoming an integral part of the premier natural‐science agency of the federal government. Geographic research emphasizes the surface of the earth, a portion of the earth system that the U.S. Geological Survey (USGS) defines as the “critical zone.” Although geography was part of the USGS from the creation of the agency, in recent years geography in the agency has largely been limited to topographic mapping. Recently, the USGS and an advisory committee of the National Research Council (NRC) reviewed the role of geography at the Survey. The committee's report, along with ongoing decision‐making in the federal government, is likely to reshape geography in the USGS. The newly defined USGS has a regional structure and four disciplines: geology, hydrology, biology, and geography. The NRC report emphasizes the need for the creation of a spatial database called the National Map to replace the existing series of paper topographic maps. The report also outlines the need for geographic research in geographic information science (GIScience), nature‐society connections, and bridging of science to decision‐making. The NRC report has been briefed throughout the USGS, in the federal executive branch, and in Congress. The changing role for geography in the USGS requires change in the agency culture, revised budgetary decisions, and the establishment of a long‐term core agenda for research. Academic geographers will need to prepare a new generation of geographers for participation in the USGS and similar agencies.     

Numerical Modeling of Basin-Range Tectonics Related to Continent-Continent Collision

Continent-continent collision is the most important driving mechanism for the occurrence of various geological processes in the continental lithosphere. How to recognize and determine continent-continent collision,especially its four-dimensional temporal-spatial evolution, is a subject that geological communities have long been concerned about and studied. Continent-continent collision is mainly manifested by strong underthrnsting (subduction) of the underlying block along an intracontinental subduction zone and continuous obduction (thrusting propagation) of the overlying block along the intracontinental subduction zone, the occurrence of a basin-range tectonic framework in a direction perpendicular to the subduction zone and the flexure and disruption of the Moho. On the basis of numerical modeling, the authors discuss in detail the couplings between various amounts and rates of displacement caused by basin subsidence, mountain uplift and Moho updoming and downflexure during obduction (thrusting propagation) and subduction and the migration pattern of basin centers. They are probably indications or criteria for judgment or determination of continent-continent collision.     

Two contrasted P–T–time paths of coronitic metanorites of the French Massif Central: are reaction textures reliable guides to metamorphic histories?

Metanorites from two eclogitized metagabbros of the Hercynian French Massif Central preserve coronitic textures of hornblende, garnet, quartz and/or kyanite produced at the expense of the primary magmatic assemblage orthopyroxene and plagioclase. Using a petrogenetic grid in the CFMASH system, two possible P–T evolutions for the origin of the coronas are evaluated. The sequence of reactions involving the formation of Hbl (–Ky) ± Grt and Qtz coronitic assemblages is consistent with an isobaric cooling at high pressure (c. 1–2 GPa) under hydrated conditions. However, this P–T path, inferred by using only petrographical observations, is inconsistent with the geochronological constraints: emplacement of the gabbro at 490 Ma and high‐pressure metamorphism at 410 Ma. In order to reconcile petrographical observations with geochronological constraints, we propose a discontinuous two‐stage evolution involving a change in water activity with time. (1) Emplacement and cooling of the norite at low pressure under anhydrous conditions, at 490 Ma. (2) During the Hercynian orogeny, the norite experienced an increase in pressure and temperature under fluid‐present conditions. Adding water to the system implies a dramatic change in the petrogenetic grid topology, restricting the orthopyroxene–plagioclase assemblage only to high temperatures. Therefore, the breakdown of the unstable magmatic assemblage, through apparent retrograde reactions, occurred along the prograde P–T path which never crossed the equilibrium boundaries of these reactions.     

Reaction localization and softening of texturally hardened mylonites in a reactivated fault zone, central Argentina

The Tres Arboles ductile fault zone in the Eastern Sierras Pampeanas, central Argentina, experienced multiple ductile deformation and faulting events that involved a variety of textural and reaction hardening and softening processes. Much of the fault zone is characterized by a (D2) ultramylonite, composed of fine‐grained biotite + plagioclase, that lacks a well‐defined preferred orientation. The D2 fabric consists of a strong network of intergrown and interlocking grains that show little textural evidence for dislocation or dissolution creep. These ultramylonites contain gneissic rock fragments and porphyroclasts of plagioclase, sillimanite and garnet inherited from the gneissic and migmatitic protolith (D1) of the hangingwall. The assemblage of garnet + sillimanite + biotite suggests that D1‐related fabrics developed under upper amphibolite facies conditions, and the persistence of biotite + garnet + sillimanite + plagioclase suggests that the ultramylonite of D2 developed under middle amphibolite facies conditions. Greenschist facies, mylonitic shear bands (D3) locally overprint D2 ultramylonites. Fine‐grained folia of muscovite + chlorite ± biotite truncate earlier biotite + plagioclase textures, and coarser‐grained muscovite partially replaces relic sillimanite grains. Anorthite content of shear band (D3) plagioclase is c. An30, distinct from D1 and D2 plagioclase (c. An35). The anorthite content of D3 plagioclase is consistent with a pervasive grain boundary fluid that facilitated partial replacement of plagioclase by muscovite. Biotite is partially replaced by muscovite and/or chlorite, particularly in areas of inferred high strain. Quartz precipitated in porphyroclast pressure shadows and ribbons that help define the mylonitic fabric. All D3 reactions require the introduction of H⁺ and/or H₂O, indicating an open system, and typically result in a volume decrease. Syntectonic D3 muscovite + quartz + chlorite preferentially grew in an orientation favourable for strain localization, which produced a strong textural softening. Strain localization occurred only where reactions progressed with the infiltration of aqueous fluids, on a scale of hundreds of micrometre. Local fracturing and microseismicity may have induced reactivation of the fault zone and the initial introduction of fluids. However, the predominant greenschist facies deformation (D3) along discrete shear bands was primarily a consequence of the localization of replacement reactions in a partially open system.     

佳木斯地块西缘金矿带构造效应与壳幔作用--以鹤岗隆起为例

佳木斯地块西缘金矿带的形成受左行走滑断裂带和深部流体控制，壳-幔作用和地球动力体制转换是成矿物质活化→运移→聚集→成矿的基本动力学保障，构造应力场转换是其重要表现形式。深切地幔牡丹江岩石圈断裂的活动发生了深熔作用，使成矿物质得以活化、运移的重要驱动力，是成岩成矿作用发生的根本原因之一。地幔流体通过壳-幔相互作用形成了含矿流体，为流体成矿作用提供了矿源，并沿深断裂运移到更高的层位，在物理化学条件发生改变时沉积成矿。佳木斯地块西缘金矿带是受深断裂控制的，矿床之间是相互联系的，是在一个构造应力体制下完成它们的成矿作用的。北北东向和伴生的北西西向断裂，并有中生代浅成-超浅成岩体或脉岩侵位是今后找矿的方向。     

Localization of mining-induced horizontal fractures along rock layer interfaces in overburden: field measurements and prediction

The locations of mining-induced horizontal fractures along rock interfaces in the overburden of Donetsk Coal Basin were identified using an original experimental device. The device traps methane from horizontal fracture zone (100–fold coal seam thickness) over an active longwall mining excavation. Presence or absence of horizontal fractures along rock layer interfaces is correlated with physical characteristics of the overburden, such as thickness, uniaxial compressive strength of overburden rock layers, location of rock layer interfaces and thickness of extracted coal seams. As a result, a combined criterion based on these physical characteristics is proposed to predict the presence of overburden horizontal fracturing in coal mine operations.