中国明矾石资源及其应用

中国明矾石矿资源丰富。矿床多产于滨西太平洋造山活化构造带中,属陆相火山岩系中的“热水沉积”矿床,可划分为中低温型及高中温型两种类型。残余岩浆水与大气水混合的热水交代火山岩是重要的成矿机制。我国东南沿海及宁芜 庐枞地区为明矾石的有利找矿远景区。明矾石矿产品之中除明矾外,其深度加工及废料再加工产品均具较高的利用价值,综合利用前景广阔。     

海南南部沿海地下水水文地球化学及成因

海岸带地下水的水文地球化学特征及其成因研究对海岸带地区地下水合理利用、保护和污染防治等具有重大意义。利用Piper图、矿物相平衡分析、离子比例系数和Gibbs分析,揭示了海南南部沿海黎安港Z1、三亚湾Z2和板桥Z3监测井在大、小潮时段地下水的水文地球化学过程、水岩交互作用、成矿趋势和地下水的成因。结果表明,Z1、Z2和Z3的地下水分别为盐水、淡水和极度咸水。水化学类型分别为Cl-Na型、HCO3·Cl-Na·Ca型和Cl-Na型。硬石膏、石膏和岩盐溶解是该区地下水中的主要离子来源。Z1和Z3的地下水来源与受蒸发浓缩控制型的高矿化度的海水紧密相关,Z2的水化学环境主要受含钠硅酸盐矿物的岩石风化溶解作用影响。研究结果为进一步开展海岸带地下水环境监测和污染防治提供基础资料。     

Elastic behavior of weakly cemented contact

We investigate the elastic behavior of weakly cemented contact. We show that the radial distribution of stresses and the stiffnesses of a cemented contact are governed by the ratio a/RΛ, where R, a, and Λ are, respectively, the grain radius, the contact size, and the ratio of the elastic moduli of cement and grains. Moreover, we show that a cemented contact is always less stiff than a Hertzian contact having a similar size. Finally, we propose accurate approximate expressions of the contact stiffnesses. Copyright © 2014 John Wiley & Sons, Ltd.     

Generalized plasticity state parameter‐based model for saturated and unsaturated soils. Part II: Unsaturated soil modeling

The aim of this paper is to extend the generalized plasticity state parameter‐based model presented in part 1 to reproduce the hydro‐mechanical behavior of unsaturated soils. The proposed model is based on two pairs of stress–strain variables and a suitable hardening law taking into account the bonding—debonding effect of suction and degree of saturation. A generalized state parameter for unsaturated state is proposed to reproduce soil behavior using a single set of material parameters. Generalized plasticity gives a suitable framework to reproduce not only monotonic stress path but also cyclic behavior. The hydraulic hysteresis during a drying—wetting cycle and the void ratio effect on the hydraulic behavior is introduced. Comparison between model simulations and a series of experimental data available, both cohesive and granular, are given to illustrate the accuracy of the enhanced generalized plasticity equation. Copyright © 2010 John Wiley & Sons, Ltd.     

Cracking risk of partially saturated porous media—Part I: Microporoelasticity model

Drying of deformable porous media results in their shrinkage, and it may cause cracking provided that shrinkage deformations are hindered by kinematic constraints. This is the motivation to develop a thermodynamics‐based microporoelasticity model for the assessment of cracking risk in partially saturated porous geomaterials. The study refers to 3D representative volume elements of porous media, including a two‐scale double‐porosity material with a pore network comprising (at the mesoscale) 3D mesocracks in the form of oblate spheroids, and (at the microscale) spherical micropores of different sizes. Surface tensions prevailing in all interfaces between solid, liquid, and gaseous matters are taken into account. To establish a thermodynamics‐based crack propagation criterion for a two‐scale double‐porosity material, the potential energy of the solid is derived, accounting—in particular—for mesocrack geometry changes (main original contribution) and for effective micropore pressures, which depend (due to surface tensions) on the pore radius. Differentiating the potential energy with respect to crack density parameter yields the thermodynamical driving force for crack propagation, which is shown to be governed by an effective macrostrain. It is found that drying‐related stresses in partially saturated mesocracks reduce the cracking risk. The drying‐related effective underpressures in spherical micropores, in turn, result in a tensile eigenstress of the matrix in which the mesocracks are embedded. This way, micropores increase the mesocracking risk. Model application to the assessment of cracking risk during drying of argillite is the topic of the companion paper (Part II). Copyright © 2009 John Wiley & Sons, Ltd.     

The behavior of a multilayered porous thermo-elastic medium with anisotropic thermal diffusivity and permeability

With the aid of integral transform techniques, this paper presents an extended precise integration solution for thermal consolidation problems of a multilayered porous thermo-elastic medium with anisotropic thermal diffusivity and permeability due to a heat source. From the fundamental governing equations, ordinary differential equations are derived by employing Laplace–Hankel transforms. By applying the extended precise integration method, equations in the transformed domain can be solved, and the actual solutions are further obtained by adopting a numerical inverse transformation. The accuracy and feasibility of the proposed theory is demonstrated by contrastive analysis with existing studies. Finally, several examples are carried out to investigate the influence of heat source’s type, axial distance, burial depth of heat source, ratio of thermo-permeability, permeability anisotropy, thermal diffusivity anisotropy and stratification on the thermal consolidation process.     

A comparison of black claystones,lignites and dump materials from the Maritsa Iztok Coal Basin,Bulgaria, using organic geochemical proxies

Geochemical analysis of dump materials from the opencast Maritsa Iztok mines, Bulgaria, was carried out based on biomarker assemblages of hydrocarbon fractions. Organic matter (OM) and secondary transformations in three representative samples (massive black claystones and materials from the Iztok and Staroselets dump sites) were studied using geochemical proxies.A number of differences were recognised in the respective OM compositions of the samples compared to both published data and between the individual dump samples themselves. The ОM of the studied samples was found to be polar, but also contains some apolar compounds. It consists mainly of resins and asphalthenes. Claystone OM is of the dispersed type, with intense oxidative-reductive interactions in a lacustrine environment resulting in its transformation into an inert material. Dump sample kerogen is of Type II and mixed Type II/III. In all samples, “odd” numbered n-alkanes are found in higher amounts. Diterpenoids (С₁₉, С₂₀) with pimarane, abietane and phyllocladane skeletons are preponderant. Tri- and tetracyclic terpenoids and steranes have been identified in the black claystones OM only. Hopanes are present in low amounts in extractable OM from all three samples. Biomarkers indicate that black claystone OM is formed from aqueous flora, with a minor supply of gymnosperms (mainly G. Sequoia). Iztok Dump OM is structured by higher plants with an aqueous vegetation input. The Staroselets Dump OM formation is assigned to an active microbial reworking of aqueous vegetation and bacteria with a minor coniferous supply. Different geochemical parameters admit anoxic stratified bottom waters for the black claystones with an addition of deep water stagnation for Staroselets sample in a Maritsa Iztok Basin (MIB) aqueous environment.An attempt was also made to track the effect of secondary processes (oxidation, destruction, dearomatisation), temperature, water drainage and wash-out on dump materials. Leaching and weak degradation processes in the MIB dump environment are likely for a time span of ca. 40–50 years, considering the low percentage of short-chain n-alkanes, long-chain prevalence and low Pr/nC₁₇ and Ph/nC₁₈ ratios, with the Iztok Dump sample experiencing more advanced transformations.     

东海表层沉积物碎屑矿物组合分布特征及其物源环境指示

为进一步明确东海陆架区的沉积物物源及水动力环境,对研究区表层沉积物的碎屑矿物进行了鉴定分析。研究区共鉴定出49种重矿物、8种轻矿物。根据碎屑矿物的组合分布结合矿物形态特征,将东海陆架区划分为三个矿物区,内陆架矿物区、外陆架矿物区及虎皮礁矿物区。内陆架矿物区,动力分选是影响碎屑矿物分布的主要因素,物质来源相对单一,碎屑矿物主要来源于现代长江物质,闽浙沿岸近岸河流的输入,人类活动也对该区的矿物组成产生一定的影响;外陆架矿物区,重矿物分布的主控因素是长期的分选作用,主要是长江物质经后期改造形成,现代长江物质可从内陆架中北部扩散至124.5°E左右,此外外陆架东南部地形的变化也对碎屑矿物的分布起到一定控制作用;虎皮礁矿物区,有来自黄河、长江、火山物质的多重影响,且水动力环境相对复杂。     

矿床成矿系列——五论矿床的成矿系列问题

矿床的成矿系列(简称成矿系列)是矿床学领域的一个理论性概念,由五级序次组成。矿床成矿系列是成矿系列的第二序次,是成矿系列的核心部分。矿床成矿系列的划分,以岩浆、沉积、变质、表生和流体(非岩浆-非变质成因流体)5种成矿作用为基本原则,以成矿地质环境为基础,结合成矿的时段与形成的矿床组合进行划分。本文对矿床成矿系列时空范围、时空组成结构、矿化强度与演化、成矿区带内不同矿床成矿系列之间的演化、叠加和复合作用及对指导找矿的意义进行了论述。     

High-reliability zircon separation for hunting the oldest material on Earth: An automatic zircon separator with image-processing/microtweezers-manipulating system and double-step dating

Despite the recent development in radiometric dating of numerous zircons by LA-ICPMS, mineral separation still remains a major obstacle, particularly in the search for the oldest material on Earth. To improve the efficiency in zircon separation by an order of magnitude, we have designed/developed a new machine-an automatic zircon separator(AZS). This is designed particularly for automatic pick-up of100 μm-sized zircon grains out of a heavy mineral fraction after conventional separation procedures. The AZS operates in three modes:(1) image processing to choose targeted individual zircon grains out of all heavy minerals spread on a tray,(2) automatic capturing of the individual zircon grains with microtweezers, and(3) placing them one-by-one in a coordinated alignment on a receiving tray. The automatic capturing was designed/created for continuous mineral selecting without human presence for many hours. This software also enables the registration of each separated zircon grain for dating, by recording digital photo-image, optical(color) indices, and coordinates on a receiving tray. We developed two new approaches for the dating; i.e.(1) direct dating of zircons selected by LA-ICPMS without conventional resin-mounting/polishing,(2) high speed U-Pb dating, combined with conventional sample preparation procedures using the new equipment with multiple-ion counting detectors(LA-MIC-ICPMS).With the first approach, Pb-Pb ages obtained from the surface of a mineral were crosschecked with the interior of the same grain after resin-mounting/polishing. With the second approach, the amount of time required for dating one zircon grain is ca. 20 s, and a sample throughput of 150 grains per hour can be achieved with sufficient precision(ca. 0.5%).We tested the practical efficiency of the AZS, by analyzing an Archean Jack Hills conglomerate in Western Australia with the known oldest(4.3 Ga) zircon on Earth. Preliminary results are positive; we were able to obtain more than 194 zircons that are over 4.0 Ga out of ca. 3800 checked grains, and 9 grains were over 4300 Ma with the oldest at 4371 ± 7 Ma. This separation system by AZS, combined with the new approaches, guarantees much higher yield in the hunt for old zircons.