渤海夏季环流的高分辨率海浪-潮汐-环流耦合模式研究

The Bohai Sea is a shallow semi-enclosed inner sea with an average depth of 18 m and is located at the west of the northern Yellow Sea. The climatological circulation pattern in summer of the Bohai Sea is studied by using a wave-tide-circulation coupled model. The simulated temperature and the circulation agree with the observation well. The result shows that the circulation pattern of the Bohai Sea is jointly influenced by the tidal residual current, wind and baroclinic current. There exists an obvious density current along the temperature front from the west part of the Liaodong Bay to the offshore area of the Huanghe Estuary. In the Liaodong Bay there exists a clockwise gyre in the area north to the 40°N. While in the area south to the 40°N the circulation shows a two-gyre structure, the flow from the offshore area of the Huanghe Estuary to the Liaodong Bay splits into two branches in the area between 39°N and 40°N. The west branch turns into north-west and forms an anti-clockwise gyre with the south-westward density current off the west of the Liaodong Bay. The east branch turns to the east and forms a clockwise gyre with the flow along the east coast of the Liaodong Bay. The forming mechanism of the circulation is also discussed in this paper.     

基于体素模型的三维显示技术

针对矿产资源勘探数据的特点,研究了适合地质体信息三维可视化的体绘制模型和空间插值算法。基于IDL软件平台,开发了三维数据可视化软件;该软件能够快速、准确地将地质体的物性特征展示出来。最后,以内蒙古某金属矿床钻孔资料为例,对建立的三维可视化方法技术进行了应用检验,取得了较好的应用效果。     

超大型铜镍硫化物矿床研究进展

超大型铜镍硫化物矿床不仅赋存有巨大的铂族贵金属资源,而且赋存有非常重要的深源信息,对其成矿理论的多学科综合研究具有重要的理论和实际意义。通过对超大型铜镍硫化物矿床的产出特征、时空分布、构造环境、控矿条件、母岩浆系列、成矿机理等研究现状的总结,认为以下几方面研究具有较大潜力：（１）矿床成因;（２）通过构造—流体—岩浆—成矿动力学综合研究,揭示成矿机制与全球变化的内在关系;（３）元古宙板块构造演化与超大型矿床形成的关系。     

570矿床控制因素及富矿形成条件

570矿床地质背景是破火山旋回边缘活动带;矿床定位要素是受破火山断裂系统构造结控制的隐爆角砾岩筒;隐爆加断陷组成的聚矿结构,是富矿形成的主要条件;隐爆角砾岩筒与次火山花岗岩浆侵位组成的热泵汲取效应,是矿床基本成因模式。矿床扩大方向是在探索隐爆角砾岩筒深部的同时,沿边缘活动带,在破火山断裂系统构造结处寻找新的隐爆角砾岩筒。     

新疆红海地区成矿有利地质体地面波谱特征及蚀变矿物分布研究

正红海地区位处新疆东天山成矿带卡拉塔格中西部,前人在该区已开展区域地质、物化探测量、多金属矿产勘查,以及针对多金属矿床的专题研究(聂凤军等,2001;左国朝等,1990),发现了较多的铜、金、铅锌等多金属矿床、矿点。但针对成矿有利地质体的蚀变研究较少。红海地区地表基岩裸露,植被分布极少,地形起伏小,围岩蚀变强烈发育,有利于发挥高光谱遥感的技术优势,开展成矿有利地质体的地面波谱特征研究,揭示成矿地质     

云南富宁县水合口矿化蚀变信息提取和找矿预测

云南富宁水合口金矿位于滇东南文山―富宁成矿带,属于著名的滇黔桂"金三角"地区。利用landsat 8OLI遥感影像对研究区进行1∶100 000矿化蚀变信息提取,结合区域地质和化探异常等多元信息进行找矿预测,表明矿化蚀变、断裂构造交汇处和地球化学异常空间叠加部位为有利找矿地区,圈定了5个找矿远景区,为研究区开展下一步找矿提供了科学依据。     

真空预压加固区硬壳层的水分运移解析解

本文根据非饱和土体的渗流理论,建立水分运移模型,研究真空预压在稳态下的水分运移机制,给出了孔隙水压力分布的控制方程及其解析解。根据工程实测数据验证解析解的结果,并对不同参数进行分析。结果表明：稳态下真空预压水分运移模型计算的结果和现场实测数据基本吻合。扩散通量Q和降饱和系数?对上层非饱和区域的形成位置、强度及厚度的影响较大。扩散通量Q越大,土体表层的基质吸力越大,孔隙水压力变化趋势就越大;降饱和系数?在0.3~1.0 kPa-1内对非饱和土体部分基本没有影响。     

被动微波反演裸露区土壤水分综述

被动微波具有全天候、穿透性以及不受云的影响等特征,使其在反演土壤水分时具有很大的优势。通过研究发现,被动微波遥感是反演土壤水分的各种技术中最有效的方法之一。概括了主要的被动微波传感器并从被动微波遥感的原理出发,针对被动微波遥感裸露区地表随机粗糙面的模型以及土壤水分反演算法作了简要介绍。     

基于3S技术的土地动态监管系统研究

研究目的:针对目前县级国土资源土地利用动态监管的现状和要求,探讨了采用信息化手段如移动执法和在线分析等工具辅助土地执法监察管理,建立土地动态监管新模式.研究方法:采用全B/S架构,ArcGIS Server Standard 9.3 GIS平台和ArcPad 7.1嵌入式GIS平台,建立土地动态监管系统.研究结论:利用3S技术建立的土地动态监管系统可以满足土地监管工作信息化需求,操作简单便捷,适合基层土地管理人员使用,同时有助于提高工作效率,降低调查成本,规范土地执法监察行为.     

Predicting reach‐specific properties of fluvial terraces to guide future fieldwork. A case study for the Late Quaternary River Allier (France) with the FLUVER2 model

Numerical models have not yet systematically been used to predict properties of fluvial terrace records in order to guide fieldwork and sampling. This paper explores the potential of the longitudinal profile model FLUVER2 to predict testable field properties of the relatively well‐studied, Late Quaternary Allier system in France. For the Allier terraces an overlapping ¹⁴C and U‐series chronology as well as a record of ¹⁰Be erosion rates exist. The FLUVER2 modelling exercise is focused on the last 50 ka of the upper Allier reach because for this location and period the constraints of the available dating techniques are tightest. A systematic calibration based on terrace occurrence and thicknesses was done using three internal parameters related to (1) the sediment erodibility; (2) the sediment transport distance; and (3) the sediment supply derived from the surrounding landscape. As external model inputs, the best available, reconstructed, tectonic, climatic and base‐level data were used. Calibrated model outputs demonstrate a plausible match with the existing fluvial record. Validation of model output was done by comparing the modelled and measured timing of aggradation and incision phases for the three locations. The modelled range of landscape erosion rates showed a reasonably good match with existing erosion rate estimates derived from ¹⁰Be measurements of fluvial sands. The quasi‐validated model simulation was subsequently used to make new testable predictions about the timing and location of aggradation and erosion phases for three locations along the Allier river. The validated simulations predict that along the Allier, reach‐specific dynamics of incision and aggradation, related to the variations in sediment supply by major tributaries, cause relevant differences in the local fluvial terrace stratigraphy. Copyright © 2016 John Wiley & Sons, Ltd.