黑龙江省矿山主要环境地质问题及防治对策

黑龙江省在矿产资源开采过程中产生了诸多的矿山环境地质问题。这些矿山环境地质问题可分为资源毁损、地质灾害、环境污染3大类。又可细分为土地资源压占、植被资源破坏、地下水位下降、风景景观和地质遗迹破坏、地面塌陷、地裂缝、崩塌、滑坡、泥石流、煤层自燃、煤矸石自燃、水土侵蚀、土地沙化、盐碱化、草原退化、水污染、土壤污染、大气污染等种类。这些矿山环境问题给黑龙江省的经济发展和生态环境造成了巨大的损失和危害。论文阐述了主要矿山环境问题及其危害,并提出了有关防治对策建议,以促进黑龙江省矿山环境保护与治理工作的进步。     

岩石中的渗透率、流体流动及热液成矿作用

热液成因的固体金属矿床形成过程中都曾拥有一段流动的历史。成矿物质以溶液的形式从矿源地穿过孔隙或断裂达到了现在的栖身之所,在此过程中流体通过的路径决定了它们的走向,而溶液本身也改变了路径的特征。因此,对于此类矿床的研究不能仅仅囿于眼之所见,而应将古流体流动的观念融入其中,并考察它们的跋涉之路。文中总结了近年来国内外在岩石孔隙、断裂介质及与其相关渗透率对热液成矿作用的控制等领域的研究成果和最新进展,对岩石渗透率、渗透率的影响因素、岩石中流体流动的特征等问题进行了阐述,讨论了渗透率对于热液成矿作用深度、成矿规模、矿质沉淀机制等方面的重要影响,藉此在固体金属矿床研究中强化流"体运动"的观念,并促进构造地质学和成矿作用地球化学间一个新研究方向的发展。     

广西佛子冲铅锌矿田成岩成矿时代研究

广西佛子冲铅锌矿田位于桂东南博白-岑溪多金属成矿带的NE端,区内发育燕山期花岗岩、花岗闪长岩、二长花岗斑岩和英安质凝灰熔岩等;其中花岗闪长岩和二长花岗斑岩与铅锌成矿关系密切,成矿岩体形成时代分别为156Ma和127Ma。     

泥石流堆积物的粒度分布及其分形结构

泥石流堆积物主要由砾石、砂砾、粉粒和粘粒组成,组成泥石流堆积物的颗粒级配变幅很大,从直径大于数十米的巨砾到肉眼难以看见的几微米的胶体微粒均有分布,大小颗粒粒径之比可达106—107。泥石流堆积物颗粒具有明显的自相似性和无标度区间。本文以小江流域多处泥石流堆积物为研究对象,采用图解法全面分析了泥石流堆积物的粒度组成特征,根据分形理论计算了泥石流堆积物颗粒的分维值,对泥石流堆积物的分形特征进行探讨,并与泥石流堆积物粒度特征相联系,发现分维很好的反映了泥石流堆积物颗粒组成及其粒度分布特征。将泥石流堆积物颗粒分维与泥石流的粘性、形成年代等性质相联系,以找出它们彼此之间的关系。     

矿山固体废弃物对地质环境的影响分析

在山西省重点地区固体废弃物现状调查研究的基础上,通过试样试验,分析研究了固体废弃物对土壤、大气、水环境的污染,探讨了对固体废弃物的治理及利用,为研究矿山生态环境地质研究提供参考,同时积累工作经验。     

大冶铁矿国家矿山公园规划实践

大冶铁矿的开发利用在为我国的钢铁事业作出巨大贡献的同时,也给矿区的地表环境、森林资源带来了很大的破坏。矿山公园的规划实施可极大地改善矿山环境,为矿山的可持续发展提供较好的途径。     

平山县泥石流的形成特征和机理分析

平山县是河北省太行山区主要泥石流地质灾害频发区,每年7～8月份强降雨期间,沟谷源头侧壁岩土体在雨水的浸泡下失稳破坏,形成崩塌与滑坡,崩滑的岩土体与沟源洼地中积聚的洪水迅速混合形成泥石流。本文认真分析了该区泥石流的分布概况,研究了泥石流灾变的形成特征,并从泥石流形成的物源条件和动力条件两方面分析了泥石流发生的机理和崩滑转化机制。     

Application of environmental groundwater tracers at the Sulphur Bank Mercury Mine, California, USA

Boron, chloride, sulfate, δD, δ¹⁸O, and ³H concentrations in surface water and groundwater samples from the Sulphur Bank Mercury Mine (SBMM), California, USA were used to examine geochemical processes and provide constraints on evaporation and groundwater flow. SBMM is an abandoned sulfur and mercury mine with an underlying hydrothermal system, adjacent to Clear Lake, California. Results for non-³H tracers (i.e., boron, chloride, sulfate, δD, and δ¹⁸O) identify contributions from six water types at SBMM. Processes including evaporation, mixing, hydrothermal water input and possible isotopic exchange with hydrothermal gases are also discerned. Tritium data indicate that hydrothermal waters and other deep groundwaters are likely pre-bomb (before ~1952) in age while most other waters were recharged after ~1990. A boron-based steady-state reservoir model of the Herman Impoundment pit lake indicates that 71–79% of its input is from meteoric water with the remainder from hydrothermal contributions. Results for groundwater samples from six shallow wells over a 6–month period for δD and δ¹⁸O suggests that water from Herman Impoundment is diluted another 3% to more than 40% by infiltrating meteoric water, as it leaves the site. Results for this investigation show that environmental tracers are an effective tool to understand the SBMM hydrogeologic regime.

---

Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.

---

Résumé Les concentrations en bore, chlorure, sulfate, δD, δ¹⁸O, et ³H d’échantillons d’eaux de surface et souterraine prélevés dans le banc de soufre de la mine de mercure (SBMM en anglais) en Californie, USA, ont été utilisées pour étudier les processus géochimiques et pour fournir des contraintes à l’évaporation et à l’écoulement des eaux souterraines. La SBMM est une mine de soufre et de mercure abandonnée, adjacente au lac Clear en Californie et sous laquelle se trouve un système hydrothermal.Les résultats des traceurs autres que le tritium (bore, chlorure, sulfate, δD, et δ¹⁸O) ont permis d’identifier des contributions de six types d’eaux à SBMM. Des processus tels que l’évaporation, le mélange, l’entrée d’eau hydrothermale et de possibles échanges isotopiques avec des gaz hydrothermaux ont également été identifiés. Les données de tritium montrent que les eaux hydrothermales et d’autres eaux profondes sont probablement d’age antérieure à la bombe (avant ~1952), alors que la plupart des autres eaux sont issues de la recharge après ~1990. Un modèle de réservoir représentant le lac situé dans la partie Herman Impoundment de l’ancienne mine, en régime permanent et basé sur le bore, montre que 71–79% de l’eau provient des précipitations, le reste provenant de contributions hydrothermales. Les résultats de δD et δ¹⁸O pour des échantillons d’eau souterraine de six puits peu profonds sur une période de 6 mois suggèrent que l’eau de Hermann Impoundment est encore diluée entre 3% jusqu’à plus de 40% lorsqu’elle quitte le site du fait de l’infiltration d’eau météorique. Les résultats de cette étude montrent que les traceurs environnementaux constituent un outil efficace pour comprendre le régime hydrogéologique de la SBMM.

---

Resumen Se han utilizado datos de concentraciones de boro, cloruros, sulfatos, δD, δ¹⁸O, y ³H en muestras de aguas superficiales y subterráneas procedentes de la Mina de Mercurio Sulphur Bank (SBMM), California, USA, para estudiar los procesos geoquímicos y caracterizar la evaporación y el flujo del agua subterránea. SBMM es una mina abandonada de azufre y mercurio con un sistema hidrotermal subyacente, cercano al Lago Clear, California.Los resultados de los trazadores que no son ³H (por ejemplo, boro, cloruros, sulfatos δD, y δ¹⁸O) identifican las contribuciones de seis tipos de agua en la SBMM. Se han identificado diversos procesos, como evaporación, mezcla, entrada de agua hidrotermal y la posibilidad de intercambios isotópicos con gases hidrotermales. Los datos de tritio indican que las aguas hidrotermales y otras aguas subterráneas profundas son probablemente pre-bombas (previas a ~1952) en edad mientras que la mayoría de las otras aguas se han recargado después de ~1990. Un modelo estacionario basado en el boro de la fosa del lago Herman Impoundment indica que el 71–79% de su entrada procede de agua meteórica con restos de contribución hidrotermal. Los resultados para las muestras de aguas subterráneas procedentes de seis pozos superficiales en un periodo de 6 meses para δD y δ¹⁸O sugieren que el agua procedente de Herman Impoundment se diluye en otro 3% hasta más del 40% debido a la infiltración de agua meteórica., que sale del sitio. Los resultados de esta investigación muestran que los trazadores ambientales son una herramienta efectiva para entender el régimen hidrogeológico de la SBMM.

     

In situ estimation of the effective chemical diffusion coefficient of a rock matrix in a fractured aquifer

An in situ method of estimating the effective diffusion coefficient for a chemical constituent that diffuses into the primary porosity of a rock is developed by abruptly changing the concentration of the dissolved constituent in a borehole in contact with the rock matrix and monitoring the time-varying concentration. The experiment was conducted in a borehole completed in mudstone on the campus of the University of the Free State in Bloemfontein, South Africa. Numerous tracer tests were conducted at this site, which left a residual concentration of sodium chloride in boreholes that diffused into the rock matrix over a period of years. Fresh water was introduced into a borehole in contact with the mudstone, and the time-varying increase of chloride was observed by monitoring the electrical conductivity (EC) at various depths in the borehole. Estimates of the effective diffusion coefficient were obtained by interpreting measurements of EC over 34 d. The effective diffusion coefficient at a depth of 36 m was approximately 7.8×10^?6 m²/d, but was sensitive to the assumed matrix porosity. The formation factor and mass flux for the mudstone were also estimated from the experiment.     

A continuous/discontinuous Galerkin framework for modeling coupled subsurface and surface water flow

We consider conjunctive surface-subsurface flow modeling, where surface water flow is described by the shallow water equations and ground water flow by Richards’ equation for the vadose zone. Coupling between the models is based on the continuity of flux and water pressure. Numerical approximation of the coupled model using the framework of discontinuous Galerkin (DG) methods is formulated. In the subsurface, the local discontinuous Galerkin (LDG) method is used to approximate ground water velocity and hydraulic head; a DG method is also used to approximate surface water velocity and elevation. This approach allows for a weak coupling of the models and the use of different approximating spaces and/or meshes within each regime. A simplified LDG method based on continuous approximations to water head is also described. Numerical results that investigate physical and numerical aspects of surface–subsurface flow modeling are presented. This work was supported by National Science Foundation grant DMS-0411413.