图像数据挖掘软件原型系统的设计与开发

提出了图像数据挖掘软件原型系统的设计与开发的试验框架,阐述了其设计与开发方法,介绍了各个模块的功能、设计与开发情况。     

玛纳斯河一级电站引水渠沿线提取地下水进行融冰的可行性研究

通过对向斜洼地含水层水文地质特征的勘探及研究,对研究区的水文地质边界条件进行了概化,并用水均衡法估算了地下水资源量,对拟建一级电站引水渠沿线提取地下水进行融冰的可行性进行了研究,并提出了取水方案.     

粉煤灰浸出特性试验研究

利用浸出试验方法,对火电厂粉煤灰进行浸出特性的测定,对其有害特性进行鉴别并分析其浸出规律,从而为地下水受粉煤灰排水影响后的水质预测、堆灰场选址、环境影响评价提供依据.     

Outlier detection algorithms and their performance in GOCE gravity field processing

The satellite missions CHAMP, GRACE, and GOCE mark the beginning of a new era in gravity field determination and modeling. They provide unique models of the global stationary gravity field and its variation in time. Due to inevitable measurement errors, sophisticated pre-processing steps have to be applied before further use of the satellite measurements. In the framework of the GOCE mission, this includes outlier detection, absolute calibration and validation of the SGG (satellite gravity gradiometry) measurements, and removal of temporal effects. In general, outliers are defined as observations that appear to be inconsistent with the remainder of the data set. One goal is to evaluate the effect of additive, innovative and bulk outliers on the estimates of the spherical harmonic coefficients. It can be shown that even a small number of undetected outliers (<0.2 of all data points) can have an adverse effect on the coefficient estimates. Consequently, concepts for the identification and removal of outliers have to be developed. Novel outlier detection algorithms are derived and statistical methods are presented that may be used for this purpose. The methods aim at high outlier identification rates as well as small failure rates. A combined algorithm, based on wavelets and a statistical method, shows best performance with an identification rate of about 99%. To further reduce the influence of undetected outliers, an outlier detection algorithm is implemented inside the gravity field solver (the Quick-Look Gravity Field Analysis tool was used). This results in spherical harmonic coefficient estimates that are of similar quality to those obtained without outliers in the input data.     

西藏地区旱涝等级划分及时空分布特征

利用西藏22个站点1969-1998年逐日降水资料，采用d指数旱涝等级方法。按夏季（5-9月），初夏（5-6月），盛夏（7-8月）时段进行了旱涝等级划分。采用EOF分析方法对全区22个站点旱涝等级展开分解，得出西藏地区的旱涝时空分布特征，主要类型和周期，而且对西藏地区夏季（5-9月）的旱涝做了预测。     

Atmospheric Surface-Layer Processes During the Total Solar Eclipse Of 11 August 1999

The central path of the total solar eclipse (TSE) of 11 August 1999 mostly passedthrough a region of active monsoon in India, with the eclipse ending around localsunset. Measurements in the surface layer (SL) were carried out close to the eclipseaxis at Akola (20°42' N, 77°2' E) in central India. The globalradiation flux reaching the surface vanishes around totality at 1803:24 (LT), followedby a small recovery before again dipping to zero at sunset. The temperatures in the SL, and subsoil at 50-mm depth, show a local minimum with a lag of about 10 min after the second contact, whereas the lag appears to vanish when the temperature series is detrended. The SL exhibits near-neutral, though generally stable, conditions from about 1500 hr itself due to heavy cloud cover followed by the eclipse-induced cooling of the surface. The wind component across the eclipse axis vanishes at totality, the wind vector aligning with the azimuth of the traversing moon shadow. The deceleration of the mean flow can be due to the combined effect of the colder surface and downward heat flux, where the locally altered horizontal temperature gradients may cause, as in this instance, the cessation of the cross flow.The oscillations in temperature and wind that show significant peaks, around 90–100 min as well as the semi-period of the eclipse near 60 min, persist for several hours past the eclipse event. A fresh analysis of the published data on the TSE of 7 March 1970 shows spectral peaks in the temperature nearly coincident with those already reported from the surface pressure records. The oscillations in the SL fields during the two TSE events are very similar implying that the source mechanism is also likely to be the same in both the cases.     

舞阳、襄城盐湖盆地未熟-低熟油成藏模式

舞阳、襄城凹陷下第三生活费为膏、盐岩相盐湖沉积。半咸水-咸水湖相、盐湖相是形成未熟-低熟油的良好环境，沉积旋回中期断坳式沉积形成了主要油源层系，其高丰度未熟烃类推岩体是形成未熟-低熟油藏的物质基础，中-高孔、中-高渗碎屑岩层构成了未熟-低熟油藏的重要储集层，并发育了较好的生储盖组合，这些有利条件为舞阳、襄城凹陷形成未熟-低熟油藏提供了重要保证。指出凹陷陡坡带为背斜、断鼻型油藏分布区，还可能有混合型油藏；中部洼陷带为岩性油藏、裂隙型油藏发育区；斜坡带主要发育断鼻型油藏。     

Anatomy of shelf deltas at the edge of a prograding Eocene shelf margin, Spitsbergen

Abstract Although shelf‐edge deltas are well‐imaged seismic features of Holocene and Pleistocene shelf margins, documented outcrop analogues of these important sand‐prone reservoirs are rare. The facies and stratigraphic architecture of an outcropping shelf‐edge delta system in the Eocene Battfjellet Formation, Spitsbergen, is presented here, as well as the implications of this delta system for the generation of sand‐prone, shelf‐margin clinoforms. The shelf‐edge deltas of the Battfjellet Formation on Litledalsfjellet and Høgsnyta produced a 3–5 × 15 km, shelf edge‐attached, slope apron (70 m of sandstones proximally, tapering to zero on the lower slope). The slope apron consists of distributary channel and mouth‐bar deposits in its shelf‐edge reaches, passing downslope to slope channels/chutes that fed turbiditic lobes and spillover sheets. In the transgressive phase of the slope apron, estuaries developed at the shelf edge, and these also produced minor lobes on the slope. The short‐headed mountainous rivers that drained the adjacent orogenic belt and fed the narrow shelf, and the shelf‐edge position of the discharging deltas, made an appropriate setting for the generation of hyperpycnal turbidity currents on the slope of the shelf margin. The abundance of organic matter and of coal fragments in the slope turbidites is consistent with this notion. Evidence that many of the slope turbidites were generated by sustained turbidity currents that waxed then waned includes the presence of scour surfaces and thick intervals of plane‐parallel laminae within turbidite beds in the slope channels, and thick spillover lobes with repetitive alternations of massive and flat‐laminated intervals. The examined shelf‐edge to slope system, now preserved mainly below the shelf break and dominated by sediment gravity‐flow deposits, has a threefold stratigraphic architecture: a lower, progradational part, in which the clinoforms have a slight downward‐directed trajectory; a thin aggradational zone; and an upper part in which clinoforms backstep up onto the shelf edge. A greatly increased density of erosional channels and chutes marks the regressive‐to‐transgressive turnaround within the slope apron, and this zone becomes an angular unconformity up near the shelf edge. This unconformity, with both subaerial and subaqueous components, is interpreted as a sequence boundary and developed by vigorous sand delivery and bypass across the shelf edge during the time interval of falling relative sea level. The studied shelf‐margin clinoforms accreted mostly during falling stage (sea level below the shelf edge), but the outer shelf later became estuarine as sea level became re‐established above the shelf edge.     

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.     

Momentum transport of wave zero during March: A possible predictor for the Indian summer monsoon

Analysis of monthly momentum transport of zonal waves at 850 hPa for the period 1979 to 1993, between ‡S and ‡N for January to April, using zonal (u) and meridional (v) components of wind taken from the ECMWF reanalysis field, shows a positive correlation (.1% level of significance) between the Indian summer monsoon rainfall (June through September) and the momentum transport of wave zero TM(0) over latitudinal belt between 25‡S and 5‡N (LB) during March. Northward (Southward) TM(0) observed in March over LB subsequently leads to a good (drought) monsoon season over India which is found to be true even when the year is marked with the El-Nino event. Similarly a strong westerly zone in the Indian Ocean during March, indicates a good monsoon season for the country, even if the year is marked with El-Nino. The study thus suggests two predictors, TM(0) over LB and the strength of westerly zone in the Indian Ocean during March.