地震期间电离层扰动现象研究

介绍了大量的关于地震电离层扰动现象研究的最新进展,研究表明地震发生前的几天或者几个小时电离层扰动被观测到,电离层前兆是确实存在.但要将震前的电离层扰动作为地震短临预报的工具,还有许多值得我们去深入研究和解决的问题.应用空间技术开展大区域范围内电离层参数的实时观测,如用地震电磁卫星、GPS台网、并和地面电离层垂测仪观测相结合,建立“电离层地震前兆监测系统”,无疑会加速这项研究的进程.     

基于可靠性的海洋立管疲劳安全系数研究

综合考虑了立管疲劳安全系数取值的相关因素——立管的安全等级、设计寿命、检验周期、载荷和损伤计算方法等的不确定性,提出了基于可靠度的疲劳安全系数确定方法,筛选了用于计算波致疲劳和VIV(涡激振动)疲劳的随机变量,给出了立管波致疲劳与VIV疲劳安全系数的计算流程,并以某SCR(钢悬链线立管)为例进行了安全系数计算。结果表明,该方法的计算结果优于传统的安全系数确定方法,尤其适合于特殊工程方案或新颖设计的立管疲劳校核。     

丝阵Z箍缩早期消融等离子体动力学的二维数值模拟研究

采用理想磁流体力学模型,给出合理的二维(r, θ)质量注入边界条件,对丝阵Z箍缩早期消融等离子体的动力学过程进行了二维(r, θ)数值模拟研究,得到消融等离子体各参量以及磁场的二维时空分布.模拟结果表明,消融等离子体的运动包括四个主要阶段:首先向轴漂移,然后在轴线处滞止并形成先驱等离子体柱,随后先驱等离子体柱被压缩,最后缓慢膨胀.计算了不同丝阵半径和丝间距情况下消融等离子体到轴速度以及消融质量占丝阵总质量的份额,它们的变化规律与实验结果基本符合.通过     

行星际等离子区对火星探测器距离观测量的影响

根据Muhleman和Anderson在1981年给出的行星际空间等离子体密度模型,模拟计算了行星际等离子区对8GHz电波的距离延迟与太阳-地球-航天器夹角(SEP)和光路径长度(L)的关系。结果显示,在本文的模拟条件下,距离延迟随SEP和L从几毫米变化到几十米。最后,分别仿真了一条地火转移轨道和环火星轨道,计算了两种情况下行星际等离子区延迟对测站到航天器距离观测量的影响。     

德尔尼钴铜矿床物探勘查方法优选

德尔尼钴铜矿床主要矿石为致密块状含铜黄铁矿,上世纪60年代通过在矿区和外围投入11∶0000面积性自电、磁法测网,圈定自电异常28处,其中确定为矿致异常的14处,自电方法在德尔尼铜钴矿勘探初期发挥了重要作用。但利用这种找矿模式,从上世纪70年代至今,矿区外围找矿尚无突破性进展,这就需要对勘查方法进行比较与优选。本文通过对前人在矿区进行的物探方法加以比较,设计地电模型,进行瞬变电磁方法模拟计算,分析用瞬变电磁法探测矿体的有效性并在已知矿区进行的瞬变电磁剖面试验中获得成功,试验方法效果好,可以用于进一步外围找矿。     

论直流激发极化法的视电阻率参数

直流激发极化法,计算视电阻率的一次场采集于供电方波的末端时间,从而包含了被激发形成的二次场。在高极化率地质体上,得到的视电阻率将削弱其低阻特性或放大高阻特性。为此,建议在野外工作中,应对所采集的一次场作适当的处理后,再计算视电阻率,以降低这种影响。     

Preconditioned IDR(s) iterative solver for non‐symmetric linear system associated with FEM analysis of shallow foundation

Non‐associated flow rule is essential when the popular Mohr–Coulomb model is used to model nonlinear behavior of soil. The global tangent stiffness matrix in nonlinear finite element analysis becomes non‐symmetric when this non‐associated flow rule is applied. Efficient solution of this large‐scale non‐symmetric linear system is of practical importance. The standard Krylov solver for a non‐symmetric solver is Bi‐CGSTAB. The Induced Dimension Reduction [IDR(s)] solver was proposed in the scientific computing literature relatively recently. Numerical studies of a drained strip footing problem on homogenous soil layer show that IDR(s = 6) is more efficient than Bi‐CGSTAB when the preconditioner is the incomplete factorization with zero fill‐in of global stiffness matrix K_ep (ILU(0)‐K_ep). Iteration time is reduced by 40% by using IDR(s = 6) with ILU(0)‐K_ep. To further reduce computational cost, the global stiffness matrix K_ep is divided into two parts. The first part is the linear elastic stiffness matrix K_e, which is formed only once at the beginning of solution step. The second part is a low‐rank matrix Δ, which is re‐formed at each Newton–Raphson iteration. Numerical studies show that IDR(s = 6) with this ILU(0)‐K_e preconditioner is more time effective than IDR(s = 6) with ILU(0)‐K_ep when the percentage of yielded Gauss points in the mesh is less than 15%. The total computation time is reduced by 60% when all the recommended optimizing methods are used. Copyright © 2013 John Wiley & Sons, Ltd.     

Passive microwave remote sensing of the historic February 2010 snowstorms in the Middle Atlantic region of the USA

The snowfall in the Baltimore/Washington metropolitan area during the winter of 2009/2010 was unprecedented and caused serious snow‐related disruptions. In February 2010, snowfall totals approached 2 m, and because maximum temperatures were consistently below normal, snow remained on the ground the entire month. One of the biggest contributing factors to the unusually severe winter weather in 2009/2010, throughout much of the middle latitudes, was the Arctic Oscillation. Unusually high pressure at high latitudes and low pressure at middle latitudes forced a persistent exchange of mass from north to south. In this investigation, a concerted effort was made to link remotely sensed falling snow observations to remotely sensed snow cover and snowpack observations in the Baltimore/Washington area. Specifically, the Advanced Microwave Scanning Radiometer onboard the Aqua satellite was used to assess snow water equivalent, and the Advanced Microwave Sounding Unit‐B and Microwave Humidity Sounder were employed to detect falling snow. Advanced Microwave Scanning Radiometer passive microwave signatures in this study are related to both snow on the ground and surface ice layers. In regard to falling snow, signatures indicative of snowfall can be observed in high frequency brightness temperatures of Advanced Microwave Sounding Unit‐B and Microwave Humidity Sounder. Indeed, retrievals show an increase in snow water equivalent after the detection of falling snow. Yet, this work also shows that falling snow intensity and/or the presence of liquid water clouds impacts the ability to reliably detect snow water equivalent. Moreover, changes in the condition of the snowpack, especially in the surface features, negatively affect retrieval performance. Copyright © 2011. This article is a U.S. Government work and is in the public domain in the USA.     

微波等离子体炬原子发射光谱法测定铁和铝的研究

研究了低功率微波等离子体炬原子发射光谱法（ＭＰＴ－ＡＥＳ）对Ｆｅ，Ａｌ的测定。样品经气动雾化后，分别以流动注射与连续式两种方式引入ＭＰＴ。考察了用这两种进样方式时ＭＰＴ－ＡＥＳ的分析性能，证明低功率ＭＰＴ－ＡＥＳ具有良好的分析特性。