发展矿业 重振地勘经济

进入市场经济,地勘单位要生存和发展,必须充分发挥地勘行业自身优势,走兴办矿业经济之路,应抓住当前的机遇,开发市场紧销矿产品,要用好矿权,采用多种模式,多渠道吸引社会资金,减少投资风险,争取最高效益,同时要十分重视整理和利用积累的地质资料,为兴办矿业提供必要的科学依据。     

再论煤中大分子基本结构单元演化的拼叠作用

芳构化作用和环缩合作用的传统煤化作用理论具有一定局限性,煤中基本结构单元拼叠作用是高煤级煤演化的特有机理。拼叠作用显著发生的起点位于镜质组最大反射率Ro,max为6．0％附近,大分子化学键的均裂提供了拼叠作用得以实现的微化学环境条件,其实质是一种“动力化学”过程,与氧接芳碳等有关的大量“均裂”是在短暂的煤化阶段中突然出现的,导致“拼叠作用”的显著发生具有“阶跃式”特征,是造成高煤级煤中期到后期阶段大分子基本结构单元急剧增大的根本原因和主要地球化学机理。     

树立风险意识,确保地勘单位经济稳定和发展

随着事转企改革步伐的加快,地勘单位正在积极开辟社会地质市场,发展多种经营。参与市场竞争,就会遇到各种风险,为确保地勘单位经济稳定发展,就要建立有效的风险防范机制。     

青藏高原地壳密度变形带及构造分区

将区域重力场多尺度刻痕分析用于提取青藏高原地壳变形带的信息,可了解高原内地壳变形带从浅到深的变化和平面分布特征,并对青藏高原主要地体的空间分布定位,为岩石圈研究提供地表地质难以取得的新信息.多尺度脊形化系数的图像刻划不同深度平面上的地壳变形带.青藏高原地壳变形带从上到下由细密逐渐变为粗稀型,而且细密型变形区分布的范围逐渐缩小,到下地壳完全消失.从这种情况可以推测,以垂直地面方向上看,地壳变形带应该是树形的,下地壳粗稀型的变形带为树的主干,而中地壳粗稀型的变形带为树的分枝,上地壳的变形带为树枝的小枝杈.上地壳细密型变形分布区反映了与中新生代地壳缩短变形区的范围,下地壳清晰连续的变形带反映了青藏高原的构造骨架.多尺度边界刻痕系数的图像刻画不同深度平面上的地体边界,下地壳的刻痕边界系数与密度剧烈变化带位置吻合;因此,由多尺度刻痕分析划分地体时同时取得地体密度信息.青藏高原内密度较高的地体包括喜马拉雅地体、克什米亚地体、察隅河地体、柴达木地体、巴颜喀拉地体和羌塘地体.柴达木地体、巴颜喀拉地体和羌塘地体是青藏高原中有壳根的核,而密度最高的克什米亚和察隅河地体在大陆碰撞时不易碎裂,对东西两个构造结的形成起了关键作用.     

城市边缘带识别研究进展与展望

城市边缘带作为城市与乡村相交接的特殊地带,是城市化进程中最为敏感的区域;城市边缘带的定量识别是研究边缘带社会结构、景观格局和发展梯度的基础工作,也是城市化生态环境效应定量分析的前提条件。但边缘带识别的理论与方法未受到足够重视,缺乏系统梳理。本文在对比分析城市边缘带及相关概念的基础上,明确了城市边缘带识别的实质与内涵;提出了基于指示要素—空间单元—判别模型的城市边缘带识别概念框架,并从上述三方面系统回顾了国内外城市边缘带识别研究进展;对未来研究进行了展望,认为城乡作用机理探析、多要素综合识别、非参数化模型融合、多尺度转换以及长时间序列动态监测等将是下一步重点研究方向。     

Comparing models of debris-flow susceptibility in the alpine environment

Debris-flows are widespread in Val di Fassa (Trento Province, Eastern Italian Alps) where they constitute one of the most dangerous gravity-induced surface processes. From a large set of environmental characteristics and a detailed inventory of debris flows, we developed five models to predict location of debris-flow source areas. The models differ in approach (statistical vs. physically-based) and type of terrain unit of reference (slope unit vs. grid cell). In the statistical models, a mix of several environmental factors classified areas with different debris-flow susceptibility; however, the factors that exert a strong discriminant power reduce to conditions of high slope-gradient, pasture or no vegetation cover, availability of detrital material, and active erosional processes. Since slope and land use are also used in the physically-based approach, all model results are largely controlled by the same leading variables.Overlaying susceptibility maps produced by the different methods (statistical vs. physically-based) for the same terrain unit of reference (grid cell) reveals a large difference, nearly 25% spatial mismatch. The spatial discrepancy exceeds 30% for susceptibility maps generated by the same method (discriminant analysis) but different terrain units (slope unit vs. grid cell). The size of the terrain unit also led to different susceptibility maps (almost 20% spatial mismatch). Maps based on different statistical tools (discriminant analysis vs. logistic regression) differed least (less than 10%). Hence, method and terrain unit proved to be equally important in mapping susceptibility.Model performance was evaluated from the percentages of terrain units that each model correctly classifies, the number of debris-flow falling within the area classified as unstable by each model, and through the metric of ROC curves. Although all techniques implemented yielded results essentially comparable; the discriminant model based on the partition of the study area into small slope units may constitute the most suitable approach to regional debris-flow assessment in the Alpine environment.     

地勘单位强化财务管理的几点经验

面对新形势新任务,山东地勘单位强化项目资金管理和风险意识,在工作中注重细节,合理纳税筹划,正确处理国家、单位及职工的利益关系,确保地勘单位经济健康运行,取得了较好的经济效益。     

松辽盆地三肇地区扶杨油层油气成藏过程主控因素及成藏模式

从多元地质条件及其时空匹配关系的角度出发,对三肇地区扶杨油层油气成藏过程中的主控因素进行分析。结果表明:上覆青山口组一段源岩有效排烃范围、超压和T₂反射层油源断裂组合关系控制了油气垂向向下“倒灌”的运移范围、距离及层位;古构造背景、T₂断层与储层砂体配置关系控制着油气侧向运移的方向、通道和距离;基准面旋回、沉积微相类型与现今构造配置关系控制着油气的垂向聚集层位及平面分布规律。在此基础上,结合构造发育史、油源条件及沉积微相研究成果,对研究区扶杨油层油气成藏模式进行了总结,认为研究区扶杨油层主要存在4种成藏模式:源内--顶生下储式油气成藏模式、近源--短距离侧向运移--斜坡带断层遮挡油气成藏模式、源外--长距离侧向运移--继承性构造隆起带油气成藏模式、多源--多方式侧向运移油气成藏模式。     

Massively parallel spatial point pattern analysis: Ripley’s K function accelerated using graphics processing units

This study presents a massively parallel spatial computing approach that uses general-purpose graphics processing units (GPUs) to accelerate Ripley’s K function for univariate spatial point pattern analysis. Ripley’s K function is a representative spatial point pattern analysis approach that allows for quantitatively evaluating the spatial dispersion characteristics of point patterns. However, considerable computation is often required when analyzing large spatial data using Ripley’s K function. In this study, we developed a massively parallel approach of Ripley’s K function for accelerating spatial point pattern analysis. GPUs serve as a massively parallel platform that is built on many-core architecture for speeding up Ripley’s K function. Variable-grained domain decomposition and thread-level synchronization based on shared memory are parallel strategies designed to exploit concurrency in the spatial algorithm of Ripley’s K function for efficient parallelization. Experimental results demonstrate that substantial acceleration is obtained for Ripley’s K function parallelized within GPU environments.     

The bedform morphology of Chinese sturgeon spawning sites in the Yangtze River

Quantitative measures of the relationships between channel morphology and the habitat use of Chinese sturgeon(Acipenser sinensis) can help management and regulatory agencies to quantify potential spawning habitats and develop recovery goals in view of the decreasing area of sturgeon spawning habitat.This study determined the specific bedform types at the pool-riffle scale and evaluated the slopes,aspects and bed load gradation composition of Chinese sturgeon spawning areas in the Yangtze River,China.A bedform differencing technique was used to objectively quantify the longitudinal riverbed profile into four distinct pool-riffle units that were independent of discharge.The vertical location of thalweg points within these units was quantified with a riffle proximity index.Chinese sturgeon spawning areas were mapped and correlated with the pool-riffle units,slopes and aspects.The results indicate that Chinese sturgeon spawning areas occur primarily in riffles.The majority of Chinese sturgeon spawning occurred at elevations greater than 75%of the difference in elevation between the nearest riffle crest and the pool bottom.The slope of spawning sites was distributed between 0.05 and 6.36,and the average aspects were 219.92 and 207.63,respectively.The bed load is mainly composted of gravel and pebble,sediment diameter concentrated on 50-500mm.These analyses of bedform morphology will assist regional fish managers in quantifying existing and potential Chinese sturgeon spawning habitats and will provide a quantitative framework for evaluating general ecological implications of channel morphology in the Yangtze River.