云南省祥(云)-临(沧)公路红土坡隧道变形原因及加固方案

云南省祥(云)-临(沧)公路红土坡隧道，在施工过程中变形严重，洞内数次冒顶、产生地面陷落，并诱发滑坡，严重影响了施工进度并造成较大经济损失。文章根据现场勘查及变形监控量测资料，详细论述了隧道变形特点，从地层岩性、构造、地应力条件、地下水作用、施工工艺、滑坡影响等方面综合分析了隧道变形原因。红土坡隧道变形是软弱的地层岩性、地应力条件改变、地下水作用、施工工艺以及滑坡偏压等各种因素共同作用的结果。且隧道变形诱发滑坡，滑坡又促使隧道进一步变形。基于此，文章提出了首先对滑坡进行支挡，再对隧道围岩进行加固的整治思路，并提出具体工程方案。整治工程实施后，红土坡隧道变形已得到完全控制，取得良好的治理效果。     

浅埋暗挖技术在南平市天台隧道工程施工中的应用

主要介绍了在Ⅱ、Ⅲ类围岩中施工城市浅埋隧道的施工技术，以“短开挖、快封闭、强支护、勤量测”为指导，将隧道分成上、下两个台阶进行开挖，及时进行初期支护，保证施工始终处于安全状态。     

浙江江山石鼓水库除险加固工程技术措施

根据浙江江山石鼓水库大坝的结构构造特点、水库地质条件以及水库病险原因与状况，制定出一套科学完善的病险水库除险加固工程技术措施和施工操作规程，对病险水库进行了全面彻底治理，并取得良好效果。详细介绍了工程病险状况，除险加固方案设计，施工工艺及操作规程，加固效果检测及评价等。     

Stability analysis of tunnels driven in jointed rocks by means of a homogenized limit analysis approach

Conceived as a potential alternative to the classical design methods employed for analyzing the stability of underground structures driven in jointed rocks, the homogenization approach stems from the heuristic idea that, from a macroscopic point of view, a rock mass cut by a network of joints may be perceived as a homogenized continuum. The strength properties of the latter can be theoretically obtained from the failure conditions of its individual constituents: rock matrix and joint interfaces. At the material level, the limit analysis reasoning is used in the context of homogenization to formulate the homogenized strength criterion of a jointed rock mass in the particular situation of a single set of parallel joints. As it could be expected, the obtained closed‐form expressions show the strength anisotropy induced by joint preferential orientation. The support functions (π functions) associated with the homogenized strength criterion are also determined in both plane strain and three‐dimensional cases. This criterion is then applied to the investigation of stability analysis of a tunnel excavated in a jointed rock mass. Upper bounds estimated of the stability factor are derived from the implementation of the kinematic approach directly on the homogenized underground structure. Finally, the approach is applied to analyze and discuss the collapse of the Pinheiros subway station (São Paulo, Brazil). Copyright © 2014 John Wiley & Sons, Ltd.     

A new numerical approach to the hyperstatic reaction method for segmental tunnel linings

This paper proposes a numerical approach to the hyperstatic reaction method (HRM) for the analysis of segmental tunnel linings. The influence of segmental joints has been considered directly using a fixity ratio that is determined on the basis of the rotational stiffness. The parameters necessary for the calculation are presented. A specific implementation has been developed using a FEM framework. This code is able to consider the three‐dimensional (3D) effect of segment joints in successive rings on the tunnel lining behaviour. The present HRM allows one to take an arbitrary distribution of segment joints along the tunnel boundary into consideration. In addition, the rotational stiffness of segment joints has been simulated using nonlinear behaviour, as it is closer to the true behaviour of a joint than linear or bilinear behaviour. The numerical results of three hypotheses on ring interaction, which allow the 3D effect of a segmental tunnel lining to be taken into account, have been compared with data obtained from the shield‐driven tunnel of the Bologna–Florence high‐speed railway line project. The numerical results presented in the paper show that the proposed HRM can be used to effectively estimate the behaviour of a segmental tunnel lining. Copyright © 2014 John Wiley & Sons, Ltd.     

秩亏自由网平差在地铁隧道保护区中的应用

地铁隧道保护区沉降监测网中包含多个基准点,依据不同基准点平差所得结果也不相同。本文引入秩亏自由网平差方法,将所有基准点视为待定参数进行平差,并通过工程实例,验证此方法在地铁隧道保护区沉降观测中有一定的适用性。     

浅析运营期间电力隧道自动化监测技术

针对城市电力隧道结构、走向多变、电缆设施多、电磁干扰大等因素,常规的监测方法难以顺利完成的现状,对目前先进的3种隧道结构自动化监测系统进行深入的研究比较,光纤传感自动技术解决了电力隧道结构监测点布设困难,数据受电磁干扰大的问题,能实时有效、可靠、高精度地监控电力隧道,及时掌握隧道的应力、应变及振动等主要结构参数,确保隧道结构安全。研究对类似的城市电力隧道自动化监测具有一定的参考意义。     

港珠澳大桥沉管隧道贯通误差预计

针对港珠澳大桥沉管隧道的安全贯通问题,该文从隧道外GPS网的布设及施测方法出发,通过多期复测数据评价GPS网具有可靠的测量精度;通过对GPS网点的稳定性分析,阐明了沉管隧道地面控制点位无法长期保留、稳定性差的特点;最后就GPS网引起的贯通误差影响值进行了估算。     

高水压顶管隧道管节修复装置的设计与应用

富春江顶管工程为例,介绍了一种可快速拆卸的用于深埋顶管隧道对管节局部破损进行修复的装置。装置结构简单、紧凑,易于在圆形截面的隧道中进行快速拼装。该装置最高耐水压力0.8 MPa,可对地下水位以下30~80 m顶管隧道中出现沿轴线长＜0.4 m环状破损的管节进行注浆修复。这种设计能够有效解决深埋顶管隧道小面积局部破损、小范围漏水涌砂等问题,为深埋顶管等方法构筑的圆形隧道提供应急修复保障。     

山岭隧道工程综合地质勘察方法探讨

山岭隧道工程具有隐蔽性、施工复杂性、地层条件和周围环境不确定性等特点,采用科学的勘察方法,是查明隧道岩土体工程地质条件的有效手段。本文以海淀区西山隧道为依托,针对隧道工程勘察中的关键地质问题,运用工程地质测绘、钻探、工程物探、水文地质勘查等综合勘察方法,有效地查明隧址区的地质构造、岩土体结构和地下水分布特征,全面、客观地评价隧道进出口段边坡及仰坡稳定性、隧道围岩质量与稳定性、隧道涌水量、地应力及有害气体等工程地质问题,并针对不良地质现象提出防治对策,以期为工期紧张、地形困难且日趋增多的山岭隧道工程地质勘察,提供可以借鉴的模式和方法。