一次电线积冰个例的数据处理及关联度分析

利用在四川省阿坝、甘孜和雅安布置的3个称重式电线积冰自动观测站2017年2月4—5日观测资料讨论该装置观测数据处理方法并分析所观测气象要素与数据的关联度。结果表明:基于T值的小波滤波方法具有良好的滤波效果,经过小波滤波后原始数据中的干扰量得到了有效抑制和消除,保留了数据变化的特征信息。通过灰色综合关联度分析,气象要素与电线积冰称重数据的关联度大小依次为温度、气压和风速,关联度在0.516~0.632之间;综合风向玫瑰图分析发现,迎风向导线积冰的增长大于顺风向。     

食品级氯化钾制备工艺和杂质检测方法的研究进展

食品级氯化钾的制备工艺主要为热溶结晶法,其间通过加入晶种、酸、碱、助滤剂等去除原料中的镁离子、钙离子、硫酸根、有机物等杂质。氯化钾中杂质的检测方法可采用滴定法、电感耦合等离子体光谱法、原子吸收分光光度法、紫外可见分光光度法等。随着食品级氯化钾市场规模的逐渐扩大,行业对产品质量要求也不断提高,其制备工艺技术和杂质检测方法也需不断改进和完善,进一步促进行业有序发展。     

大别山东北缘桐城高压-超高压变质带的构造解析及其对郯庐断裂带的制约

通过对郯庐断裂带南段桐城地区高压-超高压变质带详细的岩石学和构造学研究,将研究区从空间结构上划分为三个构造单元:上部低温-高压单元、中部中温-高压单元和下部超高压单元。根据研究区多期构造变形分析,共识别出了五期有区域构造地质学含义的事件(D_1-D_5):D_1代表高压-超高压变质岩中-晚三叠世同碰撞早期折返过程;D_2表征了高压-超高压变质岩晚三叠世同碰撞晚期折返过程;D_3记录了早白垩世中大别变质核杂岩的形成,也即整个中国东部晚中生代大规模伸展构造在研究区的表现;D_4可能标志着郯庐断裂走滑构造对高压-超高压造山带的叠加;D_5表现为脆性正断作用,控制了晚白垩世-古近纪潜山半地堑盆地的形成。这些结果表明了研究区所经历构造演化的复杂性,其构造几何形态很难用郯庐断裂左行平移南大别超高压变质岩来解释,也不支持桐城地区存在巨大走滑作用的证据。     

Geochemical Fingerprint and Iron Ore Potential of the Siliceous Itabirite from Palaeoproterozoic Nyong Series,Zambi Area,Southwestern Cameroon

The study area forms part of an emerging iron ore province of southern Cameroon. Geochemistry analyses reveal that the siliceous itabirite has a very simple chemical composition, with Fe₂O₃ and SiO₂ representing more than 96 wt.% of the average composition; suggesting chemical precipitates of silica and iron. Low Al₂O₃ and TiO₂ concentrations and a weak positive correlation between them point to a minor detrital component in the precipitated marine sediments. The Si/Al ratio (average 52.7) indicates the hydrothermal origin of the studied itabirite. The Al–Si discrimination diagram supports this interpretation through the plot of all data in the hydrothermal field. The studied samples have low iron content (about 39.32% Fe), high gangue content (40.97% SiO₂ and 1.3 % Al₂O₃) and low concentration of the deleterious elements (0.16 % P and < 0.01% S). The main gangue mineral is silica which can be efficiently removed from iron ores during preparation of raw materials for the blast furnace process. According to commercial standards for crude iron ores, it may be concluded that the Zambi iron ores are a low‐grade magnetic ore that can be profitably exploited for the production of iron for steel production.     

Thermomechanical evolution of the high‐grade core in the nappe zone of Variscan Sardinia,Italy: the role of shear deformation and granite emplacement

In the nappe zone of the Sardinian Variscan chain, the deformation and metamorphic grade increase throughout the tectonic nappe stack from lower greenschist to upper amphibolite facies conditions in the deepest nappe, the Monte Grighini Unit. A synthesis of petrological, structural and radiometric data is presented that allows us to constrain the thermal and mechanical evolution of this unit. Carboniferous subduction under a low geothermal gradient (~490–570 °C GPa^?1) was followed by exhumation accompanied by heating and Late Carboniferous magma emplacement at a high apparent geothermal gradient (~1200–1450 °C GPa^?1). Exhumation coeval with nappe stacking was closely followed by activity on a ductile strike‐slip shear zone that accommodated magma intrusion and enabled the final exhumation of the Monte Grighini Unit to upper crustal levels. The reconstructed thermo‐mechanical evolution allows a more complete understanding of the Variscan orogenic wedge in central Sardinia. As a result we are able to confirm a diachronous evolution of metamorphic and tectonic events from the inner axial zone to the outer nappe zone, with the Late Variscan low‐P/high‐T metamorphism and crustal anatexis as a common feature across the Sardinian portion of the Variscan orogen.     

Geology and tectono‐metamorphic evolution of the Himalayan metamorphic core: insights from the Mugu Karnali transect,Western Nepal (Central Himalaya)

New structural and tectono‐metamorphic data are presented from a geological transect along the Mugu Karnali valley, in Western Nepal (Central Himalaya), where an almost continuous cross‐section from the Lesser Himalaya Sequence to the Everest Series through the medium‐high‐grade Greater Himalayan Sequence (GHS) is exposed. Detailed meso‐ and micro‐structural analyses were carried out along the transect. Pressure (P)–temperature (T) conditions and P–T–deformation paths for samples from different structural units were derived by calculating pseudosections in the MnNKCFMASHT system. Systematic increase of P–T conditions, from ~0.75 GPa to 560 °C up to ≥1.0 GPa–750 °C, has been detected starting from the garnet zone up to the K‐feldspar + aluminosilicate zone. Our investigation reveals how these units are characterized by different P–T evolutions and well‐developed tectonic boundaries. Integrating our meso‐ and micro‐structural data with those of metamorphism and geochronology, a diachronism in deformation and metamorphism can be highlighted along the transect, where different crustal slices were underthrust, metamorphosed and exhumed at different times. The GHS is not a single tectonic unit, but it is composed of (at least) three different crustal slices, in agreement with a model of in‐sequence shearing by accretion of material from the Indian plate, where coeval activity of basal thrusting at the bottom with normal shearing at the top of the GHS is not strictly required for its exhumation.     

Phase equilibria modelling of blueschist and eclogite from the Sanbagawa metamorphic belt of southwest Japan reveals along‐strike consistency in tectonothermal architecture

The Sanbagawa metamorphic belt of southwest Japan is one of the type localities of subduction‐related high‐P metamorphism. However, variable pressure–temperature (P–T) paths and metabasic assemblages have been reported for eclogite units in the region, leading to uncertainty about the subduction zone paleo‐thermal structure and associated tectonometamorphic conditions. To analyse this variation, phase equilibria modelling was applied to the three main high‐P metabasic rock types documented in the region – glaucophane eclogite, barroisite eclogite and garnet blueschist – with modelling performed over a range of P, T, bulk rock H₂O and bulk rock ferric iron conditions using thermocalc . All samples are calculated to share a common steep prograde P–T path to similar peak conditions of ～16–20 kbar and 560–610 °C. The results establish that regional assemblage variation is systematic, with the alternation in peak amphibole phase due to peak conditions overlapping the glaucophane–barroisite solvus, and bulk composition effects stabilizing blueschist v. eclogite facies assemblages at similar P–T conditions. Furthermore, the results reveal that a steep prograde P–T path is common to all eclogite units in the Sanbagawa belt, indicating that metamorphic conditions were consistent along strike. All localities are compatible with predictions made by a ridge approach model, which attributes eclogite facies metamorphism and exhumation of the Sanbagawa belt to the approach of a spreading ridge.     

Evidence for multiple burial–partial exhumation cycles from the Onodani eclogites in the Sambagawa metamorphic belt,central Shikoku,Japan

Eclogites from the Onodani area in the Sambagawa metamorphic belt of central Shikoku occur as layers or lenticular bodies within basic schists. These eclogites experienced three different metamorphic episodes during multiple burial and exhumation cycles. The early prograde stage of the first metamorphic event is recorded by relict eclogite facies inclusions within garnet cores (X_Sps 0.80–0.24, X_Alm 0–0.47). These inclusions consist of relatively almandine‐rich garnet (X_Sps 0.13–0.24, X_Alm 0.36–0.45), aegirine‐augite/omphacite (X_Jd 0.08–0.28), epidote, amphiboles (e.g. actinolite, winchite, barroisite and taramite), albite, phengite, chlorite, calcite, titanite, hematite and quartz. The garnet cores also contain polyphase inclusions consisting of almandine‐rich garnet, omphacite (X_Jd 0.27–0.28), amphiboles (e.g. actinolite, winchite, barroisite, taramite and katophorite) and phengite. The peak P–T conditions of the first eclogite facies metamorphism are estimated to be 530–590 °C and 19–21 kbar succeeded by retrogression into greenschist facies. The second prograde metamorphism began at greenschist facies conditions. The peak metamorphic conditions are defined by schistosity‐forming omphacites (X_Jd ≤ 49) and garnet rims containing inclusions of barroisitic amphibole, phengite, rutile and quartz. The estimated peak metamorphic conditions are 630–680 °C and 20–22 kbar followed by a clockwise retrograde P–T path with nearly isothermal decompression to 8–12 kbar. In veins cross‐cutting the eclogite schistosity, resorbed barroisite/Mg‐katophorite occurs as inclusions in glaucophane which is zoned to barroisite, suggesting a prograde metamorphism of the third metamorphic event. The peak P–T conditions of this metamorphic event are estimated to be 540–600 °C and 6.5–8 kbar. These metamorphic conditions are correlated with those of the surrounding non‐eclogitic Sambagawa schists. The Onodani eclogites were formed by subduction of an oceanic plate, and metamorphism occurred beneath an accretionary prism. These high‐P/T type metamorphic events took place in a very short time span between 100 and 90 Ma. Plate reconstructions indicate highly oblique subduction of the Izanagi plate beneath the Eurasian continent at a high spreading rate. This probably resulted in multiple burial and exhumation movements of eclogite bodies, causing plural metamorphic events. The eclogite body was juxtaposed with non‐eclogitic Sambagawa schists at glaucophane stability field conditions. The amalgamated metamorphic sequence including the Onodani eclogites were exhumed to shallow crustal/surface levels in early Eocene times (c. 50 Ma).     

辽宁新甸金矿床成因

元古宇辽河群盖县组是一套黏土、半黏土质陆源碎屑沉积夹中-酸性火山岩或火山碎屑岩沉积建造,在地质历史发展过程中发生了变形变质作用,导致岩石中的硅质成分分异而形成硅化石英脉,同时,岩石中的成矿物质也发生了初步的迁移和富集.燕山期的花岗岩浆活动交代重熔了变质岩系,变质岩系中大量的成矿物质被活化、迁移至岩浆期后热液中,在成矿热液演化为偏酸性-还原性条件下,金等成矿元素发生了沉淀作用.稳定同位素、稀土元素特征表明金矿床的成矿物质来源于盖县组变质岩系,成矿热液为岩浆期后热液.伴随岩浆活动产生的一系列剪切构造既为成矿热液运移提供了通道,也为矿质沉淀提供了有利空间.新甸金矿床属于岩浆期后热液型矿床.     

西藏拉轨岗日核杂岩盖层变质分带特征及其地质意义

藏南拉轨岗日由一系列链状的热穹隆构成, 总体呈东西向延伸, 每一个热穹隆是一个变质核杂岩, 核部发育大量变质岩, 基底与盖层之间发育拆离断层.通过对拉轨岗日变质带及其特征变质矿物进行化学成分分析和温度压力估算, 得出拉轨岗日变质带的分带规律及矿物成分、变质温度、压力、深度的变化规律, 为拉轨岗日变质核杂岩的热活动提供了佐证.