On-going orogeny in the outer-arc of the Timor–Tanimbar region, eastern Indonesia

The Timor–Tanimbar islands of eastern Indonesia form a non-volcanic arc in front of a 7 km deep fore-arc basin that separates it from a volcanic inner arc. The Timor–Tanimbar Islands expose one of the youngest high P/T metamorphic belts in the world, providing us with an excellent opportunity to study the inception of orogenic processes, undisturbed by later tectonic events.Structural and petrological studies of the high P/T metamorphic belt show that both deformation and metamorphic grade increase towards the centre of the 1 km thick crystalline belt. Kinematic indicators exhibit top-to-the-north sense of shear along the subhorizontal upper boundaries and top-to-the-south sense in the bottom boundaries of the high P/T metamorphic belt. Overall configuration suggests that the high P/T metamorphic rocks extruded as a thin sheet into a space between overlying ophiolites and underlying continental shelf sediments. Petrological study further illustrates that the central crystalline unit underwent a Barrovian-type overprint of the original high P/T metamorphic assemblages during wedge extrusion, and the metamorphic grade ranged from pumpellyite-actinolite to upper amphibolite facies.Quaternary uplift, marked by elevation of recent reefs, was estimated to be about 1260 m in Timor in the west and decreases toward Tanimbar in the east. In contrast, radiometric ages for the high P/T metamorphic rocks suggest that the exhumation of the high P/T metamorphic belt started in western Timor in Late Miocene time and migrated toward the east. Thus, the tectonic evolution of this region is diachronous and youngs to the east. We conclude that the deep-seated high P/T metamorphic belt extrudes into shallow crustal levels as a first step, followed by doming at a later stage. The so-called ‘mountain building’ process is restricted to the second stage. We attribute this Quaternary rapid uplift to rebound of the subducting Australian continental crust beneath Timor after it achieved positive buoyancy, due to break-off of the oceanic slab fringing the continental crust. In contrast, Tanimbar in the east has not yet been affected by later doming. A wide spectrum of processes, starting from extrusion of the high P/T metamorphic rocks and ending with the later doming due to slab break-off, can be observed in the Timor–Tanimbar region.     

Geology, mineralogy, and PGE mineralization of the copper-nickel occurrences of the Kvinum ore field, Sredinny Range, Kamchatka

The geology and mineralogy of host metamorphic rocks, the mineralogy of sulfide ores, and the distribution of PGE mineralization were studied in detail for the Kvinum-1 and Kvinum-2 copper-nickel occurrences of the Kvinum ore field, which are the most promising targets for the copper-nickel-PGE mineralization of the Sredinny Range of Kamchatka. It was established that stringer-disseminated and massive copper-nickel ores are localized in amphibole peridotites, cortlandites, and form ore bodies varying from tens of centimeters to 5–20 m thick among the layered cortlandite-gabbroid massifs. The massive sulfide ores were found only at the bottom of cortlandite bodies and upsection grade into stringer-disseminated and disseminated ores. Pyrrhotite, chalcopyrite, and pentlandite are the major ore minerals with a sharply subordinate amount of pyrite, sphalerite, galena, arsenopyrite, and löllingite. Besides pentlandite, the Ni-bearing minerals include sulforasenides (gersdorffite), arsenides (nickeline), and tellurides (melonite) of nickel. It was found that PGE mineralization represented by antimonides (sudburyite) and tellurobismuthides (michenerite) of Pd with sharply subordinate platinum arsenide (sperrylite) is confined to the apical parts of massive sulfide zones and the transition zone to the stringer-disseminated ores. Ore intervals enriched in arsenides and tellurides of Ni, Pd, and Bi contain high-purity gold. In the central parts of the orebodies, the contents of PGE and native gold are insignificant. It is suggested that the contents of major sulfide minerals and the productivity of PGE mineralization in the cortlandites are defined by combined differentiation and sulfurization of ultramafic derivatives under the effect of fluids, which are accumulated at the crystallization front and cause layering of parental magmas with different sulfur contents. The fluid-assisted layering of mafic-ultramafic massifs resulted in the contrasting distribution of PGM in response to uneven distribution of sulfur (as well as As, Te, and Bi) during liquid immiscibility. The productivity of PGE mineralization significantly increases with increasing contents of S, As, Te, and Bi (elements to which Pt and, especially, Pd have high affinity) in fluids.     

On the quantitative evaluation of metamorphic fluid composition: Verification of the results of physicochemical simulations for water-mineral-rock reactions

This paper reports the results of a comparison of the qualitative physicochemical simulations (by the Winsel program complex) of the composition of the reacting fluid with experimental data on the water-electrolyte (NaCl, HCl, NaOH, and KOH)-mineral (quartz, corundum, microcline, and plagioclase) system and the water-electrolyte-rock (granite and pelite) system at 400–800°C and 1–10 kbar. Constraints are proposed for the temperature, pressure, and the composition of the electrolyte at which the simulation results are consistent with the experimental data.     

深俯冲和折返动力学:来自中国大陆科学钻探主孔及苏鲁超高压变质带的制约

中国大陆科学钻探工程和苏鲁高压-超高压变质带为大陆岩石圈的深俯冲与折返动力学的研究提供了以下制约:(1)苏鲁高压/超高压变质地体迭置于南、北苏鲁两个不同时代及属性的基底之上;(2)苏鲁巨量表壳岩石深俯冲至200km以下的上地幔深度,并经历超高压变质作用;(3)根据不同类型超高压变质岩石锆石的SHRIMP-U/Pb原位精确定年,获得超高压变质岩石的深俯冲-折返全过程(240～252Ma→230～237Ma→207～218Ma)时限.并建立了新的深俯冲-折返全过程的P-T-t轨迹;(4)富钛铁的辉长岩在大陆地壳的深俯冲过程中,经历了超高压变质作用并转变成了富含金红石的榴辉岩,形成了超高压变质的钛矿床;(5)通过榴辉岩和石榴石橄榄岩的显微构造分析及石榴石、绿辉石和橄榄石EBSD测量,确定深俯冲过程中绿辉石和橄榄石的组构运动学和流变学特征;(6)在大陆的深俯冲过程中,强烈水化的陆壳岩石经历了进变质脱水过程,巨量的地表水带入到＞100～200Km的地幔深处,在超高压变质峰期的极端条件下,通过含水超高压变质矿物的分解形成超临界的含水熔体,导致有效的壳-幔物质交换和岩石圈物质分异;(7)苏鲁超高压变质地体在折返阶段形成挤出纳布构造,与岩石圈深俯冲管道流的折返挤出机制有关;(8)提出新的深俯冲-折返动力学模式:陆.陆碰撞的深俯冲剥蚀模式及大陆地壳多重性、分层型和穿时性的俯冲和折返模式.     

凤山县地质灾害统计分析及预报方法

通过对凤山县地质灾害统计分析，提出了降雨是诱发地质灾害的主要因素，建立地质灾害气象条件等级预报的简易方法。     

鲁东胶北地区中太古代唐家庄岩群

１０余年来,通过对鲁东胶北地区太古宙地层的研究,原胶东群中剔除出大量的变质变形深成侵入岩,并从其底部分离出一套呈包体状态残存于花岗质岩石中的紫苏磁铁石英岩、二辉斜长角闪麻粒岩等,据此建立了唐家庄岩群。该岩群为一套经受角闪麻粒岩相高级变质的表壳岩组合,同位素测年数据为２７６３～２９３６Ｍａ,与之相伴产出的超基性岩同位素地质年龄值为２６９３～３１５０Ｍａ,其特征与鲁西地区沂水岩群相似,说明太古宙时鲁东和鲁西曾是一个统一的克拉通陆核。     

胶南造山带中高压、超高压变质矿

胶南造山带榴辉岩中的高压、超高压变质矿物主要有绿辉石、镁铝榴石、柯石英、金刚石、金红石等。柯石英、金刚石均呈微晶状包裹于石榴子石、绿辉石中。柯石英多已转化为石英聚晶,并使包裹它的矿物产生放射状胀裂纹;金刚石呈近等轴八面体等,其形成压力达３．５ＧＰａ以上。榴辉岩围岩中的高压、超高压变质矿物主要有辉石类（透辉石、霓石、暗硬玉）、钠钙质钠质角闪石（钠闪石、镁钠闪石）、多硅白云母（３Ｔ型）、钠长石、绿帘石等。高压、超高压变质矿物的广泛出现指示区内存在两期高压变质作用：早期为超高压榴辉岩相变质作用;晚期为高压绿片岩相榴辉岩相变质作用。华北板块与扬子板块的多次碰撞是区内高压、超高压变质作用产生的主要原因。     

对山东高压-超高压变质带的几点看法——程裕淇院士野外考察记

通过对山东高压超高压变质带的考察,初步认为：榴辉岩的最后隆升时代为燕山期;含硬玉石英岩＋榴辉岩＋（透辉石）大理岩组合说明表壳岩经历了高压超高压变质作用;该带晋宁期长英质片麻岩花岗岩广泛出露;在其北部麻粒岩和榴辉岩密切伴生。     

The Meatiq dome (Eastern Desert, Egypt) a Precambrian metamorphic core complex: petrological and geological evidence

The Meatiq basement, which is exposed beneath late Proterozoic nappes of supracrustal rocks in the Central Eastern Desert of Egypt, was affected by three metamorphic events. The ophiolite cover nappes show only the last metamorphic overprint. The M1 metamorphic event (T ≥750 °C) is restricted to migmatized amphibolite xenoliths within the Um Ba′anib orthogneiss in the structurally lowest parts of the basement. Typical upper amphibolite facies M2 mineral assemblages include Grt–Zn-rich Spl–Qtz±Bt, Grt–Zn-rich Spl–Ms–Kfs–Bt–Sil–Qtz and locally kyanite in metasedimentary rocks. The mineral assemblages Ms–Qtz–Kfs–Sil in the matrix and Sil–Grt in garnet cores indicate that peak M2 P–T conditions exceeded muscovite and staurolite stabilities. Diffusional equilibration at M2 peak temperature conditions caused homogeneous chemical profiles across M2 garnets. Abundant staurolite in garnet rims and the matrix indicates a thorough equilibration during M2 at decreasing temperature conditions. M2 P–T conditions ranged from 610 to 690 °C at 6–8 kbar for the metamorphic peak and 530–600 °C at about 5.8 kbar for the retrograde stage. However, relic kyanite indicates pressures above 8 kbar, preceeding the temperature peak. A clockwise P–T path is indicated by abundant M2 sillimanite after relic kyanite and by andalusite after sillimanite. M2 fluid inclusions, trapped in quartz within garnet and in the quartz matrix show an array of isochores. Steepest isochores (water-rich H₂O-CO₂±CH₄/N₂ inclusions) pass through peak M2 P–T conditions and flatter isochores (CO₂-rich H₂O-CO₂±CH₄/N₂ inclusions) are interpreted to represent retrograde fluids which is consistent with a clockwise P–T path for M2. The M3 assemblage Grt–Chl in the uppermost metasedimentary sequence of the basement limits temperature to 460 to 550 °C. M3 temperature conditions within the ophiolite cover nappes are limited by the assemblage Atg–Trem–Tlc to<540 °C and the absence of crysotile to >350 °C. The polymetamorphic evolution in the basement contrasts with the monometamorphic ophiolite nappes. The M1 metamorphic event in the basement occurred prior to the intrusion of the Um Ba′anib granitoid at about 780 Ma. The prograde phase of the M2 metamorphic event took place during the collision of an island arc with a continent. The break-off of the subducting slab increased the temperature and resulted in the peak M2 mineral assemblages. During the rise of the basement domain retrograde M2 mineral assemblages were formed. The final M3 metamorphic event is associated with the updoming of the basement domain at about 580 Ma along low-angle normal faults.     

Sapphirine-bearing granulites and related high-temperature metamorphic rocks from the Higo metamorphic terrane, west-central Kyushu, Japan

The Higo metamorphic unit in west-central Kyushu island, southwest Japan is an imbricated crustal section in which a sequence of units with increasing metamorphic grade from high (northern part) to low (southern part) structural levels is exposed. The basal part of the metamorphic sequence representing an original depth of 23–24  km consists mainly of garnet–cordierite–biotite gneiss, garnet–orthopyroxene gneiss, orthopyroxene-bearing amphibolite and orthopyroxene-bearing S-type tonalite. These metamorphic rocks underwent high amphibolite-facies up to granulite facies metamorphism with peak P – T  conditions of 720  MPa, 870  °C. In addition sapphirine-bearing granulites and related high-temperature metamorphic rocks also occur as tectonic blocks in a metamorphosed peridotite intrusion. The sapphirine-bearing granulites and their related high-temperature metamorphic rocks can be subdivided into five types of mineral assemblages reflecting their bulk chemical compositions as follows: (1) sapphirine–corundum–spinel–cordierite (2) corundum–spinel–cordierite (3) garnet–corundum–spinel–cordierite (4) garnet–spinel–gedrite–corundum, and (5) orthopyroxene–spinel–gedrite. These metamorphic rocks are characterized by unusually high Al₂O₃ and low SiO₂ contents, which could represent a restitic nature remaining after partial melting of pelitic granulite under the ultra high-temperature contact metamorphism at the peak metamorphic event of the Higo metamorphic unit. The metamorphic conditions are estimated to be about 800  MPa and above 950  °C which took place at about 250  Ma as a result of the thermal effect of the regional gabbroic rock intrusions.