Stepwise Conditional Transformation for Simulation of Multiple Variables

Most geostatistical studies consider multiple-related variables. These relationships often show complex features such as nonlinearity, heteroscedasticity, and mineralogical or other constraints. These features are not handled by the well-established Gaussian simulation techniques. Earth science variables are rarely Gaussian. Transformation or anamorphosis techniques make each variable univariate Gaussian, but do not enforce bivariate or higher order Gaussianity. The stepwise conditional transformation technique is proposed to transform multiple variables to be univariate Gaussian and multivariate Gaussian with no cross correlation. This makes it remarkably easy to simulate multiple variables with arbitrarily complex relationships: (1) transform the multiple variables, (2) perform independent Gaussian simulation on the transformed variables, and (3) back transform to the original variables. The back transformation enforces reproduction of the original complex features. The methodology and underlying assumptions are explained. Several petroleum and mining examples are used to show features of the transformation and implementation details.     

The anisotropy of magnetic susceptibility in biotite, muscovite and chlorite single crystals

The anisotropy of magnetic susceptibility (AMS) of single crystals of biotite, muscovite and chlorite has been measured in order to provide accurate values of the magnetic anisotropy properties for these common rock-forming minerals. The low-field AMS and the high-field paramagnetic susceptibility are defined. For the high-field values, it is necessary to combine the paramagnetic deviatoric tensor obtained from the high-field torque magnetometer with the paramagnetic bulk susceptibility measured from magnetization curves of the crystals. This leads to the full paramagnetic susceptibility ellipsoid due to the anisotropic distribution of iron cations in the silicate lattice. The ellipsoid of paramagnetic susceptibility, which was obtained for the three phyllosilicates, is highly oblate in shape and the minimum susceptibility direction is subparallel to the crystallographic c-axes. The anisotropy of the susceptibility within the basal plane of the biotite has been evaluated and found to be isotropic within the accuracy of the instrumental measurements. The degree of anisotropy of biotite and chlorite is compatible with previously reported values while for muscovite the smaller than previously published values. The shape of the chlorite AMS ellipsoid for all the samples is near-perfect oblate in contrast with a wide distribution of oblate and prolate values reported in earlier studies. Reliable values are important for deriving models of the magnetic anisotropy where it reflects mineral fabrics and deformation of rocks.     

兴山县龙王嘴边坡稳定性分析与加固设计

龙王嘴边坡系坡高达70 m、坡角达70 °的高陡岩质边坡。分析了宜-秭公路石峡段龙王嘴高边坡变形的地质条件,在定量评价龙王嘴高边坡稳定性的基础上,进行了该高边坡的施工图加固设计。根据其特点将350 m长的坡段分为A,B,C三个区,分别采取预应力锚索与锚杆加固、挂网喷射混凝土支护和喷射混凝土支护等措施,实践证明,工程治理效果良好。     

对下扬子与华南边界结合带东延问题的地球物理探讨

以江山-绍兴、铅山-宜春等断裂带作为华南与扬子块体之间的边界结合带，这种认识目前已基本为大家所接受．但是，这条边界结合带向东延伸入海之后的位置与去向一直是多年来研究的热点．本文基于黄、东海研究区的地球物理数据(空间重力数据、布格重力数据和地震层析成像结果)，利用方向导数等处理方法，对研究区的地球物理数据进行处理，并对研究区的地球物理场进行了分析，划分出不同的区块．结合研究区的磁力与地质资料，利用各种成图、成像技术，形成一系列分析图件．在此基础上对华南与扬子块体之间的边界结合带进行了追踪．研究结果认为：该结合带的位置有可能比传统认识中自长江口至大黑山群岛的位置更向南一些，在杭州湾-长崎、对马海峡一线，并呈现向北略微凸出的弓形．边界结合带在深度上属于深大断裂带，一直可以追索到上地幔的顶部．与中朝与扬子块体之间的边界结合带相比较，本条结合带的踪迹不是十分清晰．表明加里东运动之后，该结合带的运动明显减弱．     

变形体的稳定性及其定量分析方法初探

变形体的稳定性是变形体性质的重要内容，它是工程实际中极为关注的问题，但从变形监测的角度上来分析变形的稳定性目前在国内外还未见任何实质性的报导。本文讨论了从变形监测角度上分析变形体稳定性的一般方法，进行变形稳定性的分类，初步研究了变形体稳定性的定量分析方法，定义了一系列量化指标，如稳定度、因素的影响域与因素的稳定域等。这些有利于把稳定性分析推向应用和深入，从而提高变形监测在变形体定性分析中的地位，增     

几何光学冠层反射建模中的光谱分量特征的参数化(英文)

该文用几何光学与辐射传输混合模型研究不连续植被冠层的几何光学反射模型的四分量（承照树冠、承照地面、阴影树冠、阴影地面）的参数化。用一个修正的均匀介质层路径散射（反射与传输）参数的解析算法估计路径散射参数（反射与传输），其中也考虑了冠层间隙的影响。光谱分量特征是不连续植被冠层的传输与反射，背景反照率，以直射光通量与天空漫射光通量比例的函数。光谱分量特征的模型与在美国缅因州Ｈｏｌａｎｄ采集的针叶林数据吻合。基于ＬｉＳｔｒａｈｌｅｒ几何光学相互遮蔽模型，用参数化的光谱分量特征对老松林和老云杉林的方向反射进行估计，其结果与在不同太阳与观测方向上的ＰＡＲＡＢＯＬＡ测量值匹配得很好。     

用航空POLDER测量仪获取的方向性信息增强对北方森林冠层的识别(英文)

ＰＯＬＤＥＲ（地球反射极化和方向）仪器在ＢＯＲＥＡＳ实验中曾搭载ＮＡＳＡ的一架Ｃ１３０飞机飞行。在ＢＯＲＥＡＳ的南部地区，ＰＯＬＤＥＲ获取了各种实验场地上的ＢＲＤＦ测量值。森林覆盖地区的大的热点特征，以及十个地区上的镜面反射分量得到了描述。该文通过ＰＯＬＤＥＲ的测量数据，对向常规的光谱特征中加入通过遥感获得的方向性特征后，对各种森林覆盖的分类和区分能力的提高给出了定量化的解。当将方向信息加入常规光谱信息后，采用无监督分类时，类间耦合矩阵的各项显著减小（减小倍数为２－５倍）。这一事实证明了用遥感方向特征可以增强对ＢＯＲＥＡＬ森林覆盖的区分能力。     

MODELING STUDY ON SEDIMENTATION CONFIGURATION IN FRONT OF THE DAM AND IN THE PRESSURE CONDUIT OF BOTTOM OUTLETS BY FLUME EXPERIMENT

I.INTRODUCTIONReseri,oirsonoverloadedriverswillreachthestateofrelativeequilibriumwithcontinuousdevelopmentofsedimentation.Insuchcase,thereisdePOsitinfrontofthedam.Thereforethesiltpressureonthedambodyisconsiderablylarge.Sedimentationelevationinfrontofthedamisoneofthefactorsofcalculatingthesiltpressure.Inaddition,tokeeplong-termworkingstorageinreservoif,itisnecessarytoinstallbottomoutlets.Asthereisapressureconduitinfrontoftheoperatinggateofthebottomoutlet,thesedimelltenteredtheconduitwill…