南极无冰区典型沉积环境石英砂表面结构特征及其在沉积环境识别中的应用

本文利用电镜扫描方法 (SEM)对比分析了南极乔治王岛无冰区海滩沉积、冰碛物以及阿德雷岛湖泊沉积等典型沉积环境中的石英砂表面结构特征 ,得出了乔治王岛各典型沉积环境中石英砂表面结构特征的颗粒频率曲线。结果表明 :不同沉积环境下的石英砂颗粒表面结构特征具有相似性 ,这主要和南极地区广泛发育的冰川作用有关 ,同时 ,它们也有各自典型的特征组合 ,这些典型特征组合的不同反映了石英砂后期的搬运历史和沉积环境的差异。本文还依据石英砂表面特征的颗粒出现频率 ,利用聚类分析方法对研究区内三级海岸阶地上的沉积物和一个未知成因的样品进行了沉积环境的判别分析 ,结果证明石英砂微形貌特征可以作为南极地区沉积环境识别的有效手段     

Sectoral Shifts and Occupational Migration in the United States

This research is grounded in notions of differential economic restructuring across employment sectors and geographic space, as well as migration selectivity by occupation. A series of unconstrained competing‐destinations models were employed to analyze the response by workers in thirteen occupational categories to sectoral employment change, average wages, and distance. As was hypothesized, workers in occupations that require high levels of education and skills are more responsive, in terms of migration, to economic opportunities in alternative labor‐market areas. However, the results do not support the hypothesis that highly educated and skilled workers migrate longer distances. Further investigation suggests that opportunities for highly educated and skilled workers may be clustering in relatively few areas that are in relatively close proximity.     

某地平板玻璃原料用石英砂的提纯研究

某地石英矿砂通过磁选分离法、稀酸浸泡法处理后，矿砂不同程度地降低了铁、铝、钙镁的含量；采用磁选分离 稀酸浸泡法联合处理后，使该地石英砂的化学成分达到了优质的生产平板玻璃用硅质原料的国家标准。     

四川盆地白垩纪沙漠石英沙颗粒表面特征

石英具有较大的硬度和较高的化学稳定性，因而其颗粒表面特征能很好地反映沉积环境。而通过扫描电镜研究石英颗粒表面微细特征是分析沉积环境行之有效的方法。虽然多数人认为四川盆地白垩纪地层存在沙漠沉积(打儿凼组和夹关组)，但仍有人对沙漠沉积的存在持怀疑态度，并认为是河流成三角洲沉积。过去关于其沉积环境的判别主要是根据沉积结构和构造，并未对其石英沙颗粒表面特征进行过系统分析。笔者对采自四川盆地白垩系不同层位地层的样品进行了石英沙颗粒表面特征系统分析。结果表明，石英沙颗粒表面特征分析可以成功地将石英沙区分为风成和水成沉积。因此，本文从石英沙颗粒表面特征方面进一步肯定了四川盆地白垩纪古沙漠的存在。     

小秦岭金矿含金石英脉中石英晶体微形貌研究

利用微分干涉显微镜等手段对小秦岭金矿含金石英脉中不同成矿阶段的石英晶体微形貌进行了研究。石英晶体{101^-1}、{011^-1}、{101^-0}单形晶面上不同特征的微形貌对了解石英晶体的生长机理、生长速率、生长环境的变化及成矿溶液的过饱和度具有重要意义，同时也可提供成矿阶段划分及晶体生长时热力学条件的信息。     

Scattering of elastic waves by a general anisotropic basin. Part 2: a 3D model

Scattering of plane harmonic waves by a three‐dimensional basin of arbitrary shape embedded within elastic half‐space is investigated by using an indirect boundary integral equation approach. The materials of the basin and the half‐space are assumed to be the most general anisotropic, homogeneous, linearly elastic solids without any material symmetry (i.e. triclinic). The unknown scattered waves are expressed in terms of three‐dimensional triclinic time harmonic full‐space Green's functions. The results have been tested by comparing the surface response of semi spherical isotropic and transversely isotropic basins for which the numerical solutions are available. Surface displacements are presented for a semicircular basin subjected to a vertical incident plane harmonic pseudo‐P‐, SV‐, or SH‐wave. These results are compared with the motion obtained for the corresponding equivalent isotropic models. The results show that presence of the basin may cause significant amplification of ground motion when compared to the free‐field displacements. The peak amplitude of the predominant component of surface motion is smaller for the anisotropic basin than for the corresponding isotropic one. Anisotropic response may be asymmetric even for symmetric geometry and incidence. Anisotropic surface displacement generally includes all three components of motion which may not be the case for the isotropic results. Furthermore, anisotropic response strongly depends upon the nature of the incident wave, degree of material anisotropy and the azimuthal orientation of the observation station. These results clearly demonstrate the importance of anisotropy in amplification of surface ground motion. Copyright © 2003 John Wiley & Sons, Ltd.     

Asymmetric one‐storey elastic systems with non‐linear viscous and viscoelastic dampers: Simplified analysis and supplemental damping system design

Investigated is the accuracy in estimating the response of asymmetric one‐storey systems with non‐linear viscoelastic (VE) dampers by analysing the corresponding linear viscous system wherein all non‐linear VE dampers are replaced by their energy‐equivalent linear viscous dampers. The response of the corresponding linear viscous system is determined by response history analysis (RHA) and by response spectrum analysis (RSA) extended for non‐classically damped systems. The flexible and stiff edge deformations and plan rotation of the corresponding linear viscous system determined by the extended RSA procedure is shown to be sufficiently accurate for design applications with errors generally between 10 and 20%. Although similar accuracy is also shown for the ‘pseudo‐velocity’ of non‐linear VE dampers, the peak force of the non‐linear VE damper cannot be estimated directly from the peak damper force of the corresponding linear viscous system. A simple correction for damper force is proposed and shown to be accurate (with errors not exceeding 15%). For practical applications, an iterative linear analysis procedure is developed for determining the amplitude‐ and frequency‐dependent supplemental damping properties of the corresponding linear viscous system and for estimating the response of asymmetric one‐storey systems with non‐linear VE dampers from the earthquake design (or response) spectrum. Finally, a procedure is developed for designing non‐linear supplemental damping systems that satisfy given design criteria for a given design spectrum. Copyright © 2003 John Wiley & Sons, Ltd.     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

Identification of soil degradation during earthquake excitations by Bayesian inference

A Bayesian inference approach is introduced to identify soil degradation behaviours at four downhole array sites. The approach of inference is based on a parametric time‐varying infinite impulse response filter model. The approach is shown to be adaptive to the changes of filter parameters and noise amplitudes. Four sites, including the Lotung (Taiwan), Chiba (Japan), Garner Valley (California), and Treasure Island (California) sites with downhole seismic arrays are analysed. Our results show two major types of soil degradation behaviour: the well‐known strain‐dependent softening, and reduction in stiffness that is not instantaneously recoverable. It is also found that both types of soil degradation are more pronounced in sandy soils than in clayey soils. The mechanism for the second type of soil degradation is not yet clear to the authors and suggested to be further studied. Copyright © 2003 John Wiley & Sons, Ltd.     

A unified formulation of the piecewise exact method for inelastic seismic demand analysis including the P‐delta effect

The non‐linear analysis of single‐degree‐of‐freedom (SDOF) systems provides the essential background information for both strength‐based design and displacement‐based evaluation/design methodologies through the development of the inelastic response spectra. The recursive solution procedure called the piecewise exact method, which is efficiently used for the response analysis of linear SDOF systems, is re‐formulated in this paper in a unified format to analyse the non‐linear SDOF systems with multi‐linear hysteresis models. The unified formulation is also capable of handling the P‐delta effect, which generally involves the negative post‐yield stiffness of the hysteresis loops. The attractiveness of the method lies in the fact that it provides the exact solution when the loading time history is composed of piecewise linear segments, a condition that is perfectly satisfied for the earthquake excitation. Based on simple recursive relationships given for positive, negative and zero effective stiffnesses, the unified form of the piecewise exact method proves to be an extremely powerful and probably the best tool for the SDOF inelastic time‐history and response spectrum analysis including the P‐delta effect. A number of examples are presented to demonstrate the implementation of the method. Copyright © 2003 John Wiley & Sons, Ltd.