Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

高陡岩石边坡软体护坡技术设计及施工实践

为了消除济南市燕翅山北侧采矿遗留的高陡岩石边坡的地质灾害隐患,恢复自然植被,通过施工砼基座、施工砼格构梁、砌筑软体生态袋和挂网喷播等多种技术方法进行了综合治理,消除了滑坡和崩塌等地质灾害隐患,整个坡面植被覆盖率超过99%,消除了视觉污染,恢复了当地生态环境,该工程成功的设计及施工实践对类似高陡岩石边坡有很好的指导和借鉴作用。     

Occurrence and Chemical Compositions of Amphiboles in Altered Dioritic Rocks of Laiwu Skarn‐Type Iron Deposit in West Shandong Area,China

The Laiwu Fe deposit is the largest skarn‐type deposit in West Shandong in China, with an estimated reserve of 290 Mt of iron ore. Here, we investigate the occurrence and chemical composition of amphiboles in altered dioritic rocks of this deposit. Three generations of amphibole group minerals were identified in these rocks. The first type (Type 1) is a hornblende with a generally euhedral crystal shape, 150–500 μm in size, and dominantly occurs in the host monzonite. The second type (Type 2) of hornblende occurs as fine grains (<100 μm) or concentric rims, less than 50 μm in thickness, around the Type 1 hornblende. The third type (Type 3) of amphibole is anhedral actinolite occurring along the boundary or the cracks of the Type 1 or 2 hornblende grains. The Type 1 hornblende has higher FeO (12.5–15.6 wt.%) and lower MgO contents (11.2–14.6 wt.%) than the Type 2 hornblende, which has an FeO content ranging from 8.8 to 10.5 wt.% and MgO content ranging from 14.2 to 17.1 wt.%. The Type 3 actinolite shows the lowest FeO (4.6–6.4 wt.%) and highest MgO (19.8–21.2 wt.%) contents. We infer that the Type 2 hornblende formed from Fe‐rich hydrothermal fluids released during rapid upwelling of the crystallizing magma. The fluids were relatively reduced and enriched in Fe. The Type 3 actinolite formed by coupled dissolution and reprecipitation, and its formation is one of the features denoting Fe‐enrichment events. Our study of these types of amphibole provides insights into the ore formation process.     

准噶尔盆地腹部地区生烃增压定量化评价——东道海子北凹陷为例

目前准噶尔盆地腹部地区超压演化过程仅提供了相对时间、概念、定性的认识,并未达到定量化。本文以东道海子北凹陷为例,基于流体包裹体、单井一维和剖面二维烃源岩成熟生烃史模拟技术,采用生烃增压模型定量化评价了侏罗纪八道湾组顶部和底部烃源岩的生烃增压演化过程。研究结果表明侏罗纪八道湾组为东道海子北凹陷主力烃源岩,具有幕式排烃的特点。八道湾组底部烃源岩经历了3 次超压增加和两次超压释放的过程,顶部烃源岩经历了两次超压增加和一次超压释放的过程。八道湾底部烃源岩3 次超压增加的时间分别为距今170～70 Ma、55～23 Ma、10～0 Ma,对应最大压力系数均为2.0,最大剩余流体压力50 MPa,两次超压释放的时间分别为70～55 Ma、23～10 Ma;八道湾组顶部烃源岩两次超压增加的时间分别为130～40 Ma、23～0 Ma,对应流体最大压力系数最大亦可达2.0 左右,最大剩余流体压力44 MPa,超压释放的时间为40～23 Ma。     

Evaluation of effectiveness of three fuzzy systems and three texture extraction methods for building damage detection from post-event LiDAR data

Building damage maps after disasters can help us to better manage the rescue operations. Researchers have used Light Detection and Ranging (LiDAR) data for extracting the building damage maps. For producing building damage maps from LiDAR data in a rapid manner, it is necessary to understand the effectiveness of features and classifiers. However, there is no comprehensive study on the performance of features and classifiers in identifying damaged areas. In this study, the effectiveness of three texture extraction methods and three fuzzy systems for producing the building damage maps was investigated. In the proposed method, at first, a pre-processing stage was utilized to apply essential processes on post-event LiDAR data. Second, textural features were extracted from the pre-processed LiDAR data. Third, fuzzy inference systems were generated to make a relation between the extracted textural features of buildings and their damage extents. The proposed method was tested across three areas over the 2010 Haiti earthquake. Three building damage maps with overall accuracies of 75.0%, 78.1% and 61.4% were achieved. Based on outcomes, the fuzzy inference systems were stronger than random forest, bagging, boosting and support vector machine classifiers for detecting damaged buildings.     

有机质热演化过程中地层压力的作用与影响

压力对有机质演化的影响长期以来争论不断,共有3种不同意见：压力对有机质演化没有影响,压力促进有机质的演化,压力抑制有机质的演化。通过对前人所做实验的实验设备、实验样品及实验结果的分析对比发现：不同实验结果主要是由于不同实验条件引起的,特别是实验系统和加压方式的不同,对实验结果影响最大,所代表的地质意义也不同。综合分析结果表明,当压力的增加表现为沉积有机质受到的有效应力增加时可以促进有机质生烃;当压力的增加表现为孔隙流体压力增加时,有机质生烃过程将受到抑制;另外,这两种情况都可能使干酪根的镜质组反射率降低,易使人得出压力增加抑制有机质演化的结论。进一步对压力影响有机质演化的成因机制进行了分析,发现在有机质演化的不同阶段因异常压力的增压机制不同,压力在有机质演化过程中所表现出来的作用也有差异。     

地下闭式循环地热交换发电系统简介

为解决能源问题而提出了地下闭式循环地热交换发电系统.该系统地下部分通过全井下套管形成一个封闭系统,克服了传统地热发电和干热岩发电受地质条件制约、对环境造成危害等缺点,是一种新型的不依赖位置、环境友好的地热发电系统.采用大位移技术进行钻井,应用悬链线技术对井身剖面结构进行了优化,提出了地下连接技术要求,应用分支井和膨胀套管技术固井,设计了水泥配方并进行了相关试验,优化了载热流体,计算了有机工质朗肯循环(ORC)的发电效率.     

人工智能在飞机颠簸预报中的应用进展及未来趋势展望

飞机颠簸对飞机运行安全及旅客舒适度具有很大危害,提高飞机颠簸的预报准确率对于减轻人员伤害和财产损失具有重要意义,且一直是航空气象研究的重点领域。随着观测手段的丰富和科学技术的进步,飞机颠簸预报也取得了长足发展。本文首先从定性预报和定量预报的角度对国内外飞机颠簸预报的主要方法,特别是人工智能(AI)方法在其中的最新应用进行了综述。在此基础上,归纳总结出AI用于飞机湍流预报存在的主要问题和未来的重点研究方向：1)飞机实况数据的开放共享以及多源湍流数据的融合构建问题;2)基于人工智能构建飞机颠簸预报模型的可解释性及物理机制问题;3)基于人工智能构建飞机颠簸的集合预报问题。最后,提出了气象领域未来第三代人工智能的发展思路。     

藏南拉康温泉地质特征及雄曲河谷两岸地热分布不均成因分析

西藏山南地区洛扎县雄曲河拉康段在600 m距离内出露温泉4处,仅1处位于河谷右岸;平硐勘查显示两岸岩性、产状、构造一致,地热异常却仅在左岸平硐内部显著,右岸平硐地热异常不明显.本次研究以此异常为出发点,通过片麻状花岗岩不同切面导热实验、片麻状花岗岩与板岩相同切面导热实验,温泉水δ2H,δ18O同位素测试分析等方法,探究...