The hydrocarbon generation mechanism and the three-stage type model of hydrocarbon generation for carbonate source rocks

The diagenetic mechanism and process of carbonate rocks, which is different to that of clastic rocks, decides the existence of different existing state organic matters in carbonate rocks. This has been verified by both the microscopic observation of organic petrology and the analysis of organic geochemistry of many samples. Based on the hydrous pyrolysis simulation experiment of the low-mature carbonate rocks, the contrasting study on the yield and their geochemistry characteristics of different existing state soluble organic matters of a series of various maturity samples shows that the different existing state organic matters make different contributions to hydrocarbon generation during every evolution state. So that, the hydrocarbon generation process of carbonate rocks can be summarized as the following three stages: the first is the direct degradation of biogenic bitumen macromolecules during the immature stage, the second is the thermal degradation of a large amount of kerogen at the mature stage, the last stage is the expulsion or release of inclusion organic matter owing to the increased thermal expansion pressure during the high evolution stage. Part of achievements of the Eighth Five-Year National Science-Technology Key-Task Project “85-102-02-07”.     

Evolution model and formation mechanism of bio-thermocatalytic transitional zone gas

As a new genetic type of natural gas exploration area, the bio-thermocatalytic transitional zone gas (BTTZG) has been highly stressed by geologists both at home and abroad. Systematic study on the generation mechanism of hydrocarbon at the transitional zone is presented. Based on simulating experiments and geochemistry analysis of the source rock with lower evolution, a hydrocarbon-forming model at the transitional zone has been established. The mechanism is proposed that under the condition of low temperature and pressure combining with extremely active structural stress and clay mineral catalysis, BTTZG is formed by de-group of soluble organic matter and polarized compositions through orthocarbon ion as well as by condensation polymerization of aromatic ring-rich insoluble organic matter. This mechanism controls the formation of BTTZG, and furthermore, BTTZG is the product of superimposition and interaction of all the factors mentioned above.     

湘南中新生代玄武岩成因研究及构造环境分析

定量计算了湘南中新生代多种类型玄武岩的矿物－熔浆平衡条件和岩浆粘度、密度、上升速度等岩浆物理参数，识别出了三类原生玄武岩浆，橄榄拉斑武岩浆、白榴碧玄岩浆、碧玄岩浆、根据玄武岩的地质岩石学的地球化学特征，及岩浆起源条件，深部地质和地球物理等方面资料的综合分析，认为本区玄武岩是大陆岩石圈深部热扰动的产物。     

大跨度切眼锚网锚索支护研究

全煤大跨度切眼传统的支护方式是钢棚支护,为解决无轨胶轮车直接进入工作面,提高工作面设备安装效率,课题组进行锚网锚索支护试验与研究。该项目的试验成功,为矿井高产高效创造了条件。     

鄂尔多斯盆地奥陶系海相碳酸盐岩生烃性能与中部长庆气田气源成因研究

用激光 -荧光显微镜等有机岩石学方法 ,挑选样品中有明显生、排烃现象的碳酸盐岩 ,再以测定的这类碳酸盐岩的有机碳含量为依据 ,确定本区高成熟碳酸盐气源岩残余有机碳的下限指标用 0 .13%～ 0 .14 %比较合理。根据碳酸盐岩储层孔隙中充填沥青和皮膜状残余沥青的分布和含量 ,论证了陕参 1井等奥陶系碳酸盐岩地层在地质历史中 ,存在若干油气有效储层。采用连续升温 ,步进取样的热模拟实验方法 ,揭示了本区煤与碳酸盐岩干酪根随热演化作用增强 ,烃类气体产物的干燥系数增大 ,δ1 3C1 、δ1 3C2 明显变重的规律 ,并根据样品实验结果推算 ,本区石炭系—二叠系煤最大生气阶段的δ1 3C1 应为 - 2 7‰～ - 2 8‰ ,碳酸盐岩最大生气阶段的δ1 3C1 应为- 31.7‰～ - 33‰。在气源成因判识中 ,根据主生气期阶段对天然气成藏储聚的贡献最大、甲烷碳同位素较重以及长庆气田风化壳气藏天然气δ1 3C1 重值区并不与石炭系—二叠系煤的镜质组反射率高值区匹配的现象等进行气源判识 ,认为长庆奥陶系风化壳气藏 ,具有下古生界海相碳酸盐岩气与上古生界石炭系—二叠系煤成气的混源成因     

Differential retardation of organic matter maturation by overpressure

Thetraditionalhydrocarbongenerationmodeldoesnottakeintoaccounttheeffectofpressure[1].Astotheroleofpressureinorganicmattermaturationandpetroleumgeneration,threeconflictingopinionshaveeverbeenproposed:(1)Increasingpressurehasnodetectableeffectonorganic-mattermaturation[1,2];(2)increasingpressureenhanceshydrocarbon-thermaldestruction[3];(3)increasingpressuresignificantlyretardsorganic-mattermaturationandhydrocarbongeneration[4,5].Therearemorethan180overpressuredbasinsintheworld.Theroleofoverpress…     

Accuracy analysis, dem generation and validation using russian tk-350 stereo-images

TK-350 stereo-scenes of the Zonguldak testfield in the north-west of Turkey have been analysed. The imagery had a base-to-height ratio of 0·52 and covered an area of 200 km × 300 km, with each pixel representing 10 m on the ground. Control points digitised from 1:25 000 scale topographic maps were used in the test. A bundle orientation was executed using the University of Hanover program BLUH and PCI Geomatica OrthoEngine AE software packages. Tests revealed that TK-350 stereo-images can yield 3D geopositioning to an accuracy of about 10 m in planimetry and 17 m in height. A 40 m resolution digital elevation model (DEM) was generated by the PCI system and compared against a reference DEM, which was derived from digitised contour lines provided by 1:25 000 scale topographic maps. This comparison showed that accuracy depends mainly on the surface structure and the slope of the local terrain. Root mean square errors in height were found to be about 27 and 39 m outside and inside forested areas, respectively. The matched DEM demonstrated a systematic shift against the reference DEM visible as an asymmetric shift in the frequency distribution. This is perhaps caused by the presence of vegetation and buildings.     

复杂区域四边形网格生成的一种改进方法

提出了一种改进的四边形网格生成算法。该法在行波法生成平面三角形网格的基础上，将一个三角形单元分解为三个四边形单元。经过优化处理，获得优良的计算域四边形网格。针对岩土工程结构问题，还提出了网格剖分中尖灭不连续面和锚杆及锚索的处理方案。地下洞室和边坡算例表明了这种方法的可行性和可靠性。     

潜水面变动的空间四面体单元网格自动生成方法

提出了一种由平面三角网格自动生成三维空间四面体单元网格的方法,其基本思路是将含水层平面分成三角形单元网格,将每个三角形沿垂直方向对应一个三棱柱,作为最初的三棱柱;依次将每个三棱柱按照潜水面位置和分层信息划分成不同数目的四面体,从而生成三维空间四面体单元网格。剖分结果表明,此方法综合考虑了潜水面的位置和各含水层顶底板的起伏情况,能够简洁地生成层面起伏的空间四面体网格,特别适用于刻画潜水面波动、含水层顶底板起伏和存在透镜体或岩性缺失等含水层结构复杂的情况下,自动地剖分并生成单元信息,为三维计算的实现奠定了基础。     

闽东北地区夏季对流云特征的初步分析

利用新一代天气雷达资料分析闽东北地区夏季对流云的回波特征。分析表明:多单体合并对流云在生命史、回波高度、强度、尺度等方面都超过了单体对流云,其液态水总量也更大,自然降水条件和人工影响潜力都优于单体对流云,是夏季降水和人工催化的重要云系。分析得到对流云发展的不同阶段、不同高度层辐合辐散特点,为进一步研究夏季对流云结构和降水原理提供科学依据。通过对两个个例的天气形势分析,指出冷空气对对流发展有一定的激发作用。