地下水流面三维实体模型制作系统（V1．00）

简要介绍了地下水流面在维实体模型制作系统－GWT3D（V1．00）的实体建模技术及光线跟踪原理，对其绘图所需数据文件结构进行了必要说明，同时阐述了GWT3D的功能与特色，并给出了该软件在这地区绘制地下水流场三维实体模型的一个实用实例。GWT3D是由VisualC 6.O开发的Win32应用程序，采用Outloow98流行的动画工具条风格，能利用通和地下水流模拟软件（如Modfolw等）所提供的网格剖分及水位数据，给制近似逼真的三维地下水流形态，具有动画显示功能和TIF、BMP、GIF3种图像文件存储格式，是一个专业性和实用性较强的计算机图像制作软件。     

兰山采场下盘边坡岩体结构面的分析与研究

通过对兰家火山露天矿边坡岩体中结构面的研究分析，论述了不同类型的结构面对边坡稳定性的影响程度，强调生产矿山开展岩体结构面分析研究的重要意义。     

滑坡滑动面位置的确定及超前预测

依据滑坡深部位移信息,分析滑坡“B”型、“D”型、“r”型变形特征，确定滑坡滑动面位置，提出了滑坡滑动面位置超前预测的位移矢量法。为系统分析及超前预测滑坡滑动面位置提供依据，为深入研究滑坡运动特征提供信息。     

正常固结饱和粘性土的不排水强度

本文以有效应力强度理论和Henkel孔隙水压力公式为基础,建立了各种类三轴与平面应变试验条件下正常固结饱和粘土的不排水强度公式及相互关系;初步估计了粘土强度随固结增长的计算公式.     

合成平面波数据的Rytov近似叠前深度偏移

作者把Berkhout(1992)提出的合成平面波技术应用于线性Rytov近似叠前深度偏移，提高了波动方程叠前深度偏移的计算效率。通过在Marmousi模型数据试验，我们认为在达到基本相同成像效果的条件下，利用合成平面波技术的波动方程叠前深度偏移相对于基本共炮集数据的波动方程叠前深度偏移可提高计算效率约10倍。     

Broadband synthetic aperture borehole radar interferometry

Trials in mines have established that wideband VHF borehole radars (BHR), working in the 10–100-MHz band, can be used to probe the rockmass between boreholes over ranges from <5 m to as much as 150 m with submeter resolution. There is evidence that ore bodies reflect these radar signals both specularly and diffusely, much as the ground/air interface does when overflown by synthetic aperture radar (SAR). In both SAR and BHR, multiple flight lines, together with diffuse reflections admit the possibility of developing interferometric 3D images of the object. This paper examines the possibility of imaging buried objects in three dimensions by interferometrically combining broadband VHF borehole radar profiles shot in adjacent pairs of boreholes. Broadbanding in BHR has the advantage of releasing the image from 2nπ phase ambiguities, but practically, interferometric borehole radar (InBHR) needs high signal-to-noise ratios (SNR) to avoid noise capture. This means that 3D InBHR is limited to ranges in wavelengths which are less than the rock's attenuation factor Q. Interferometric methods are developed which are capable of mapping ore bodies and other structures in three dimensions. Tangent plane migration methods are developed here in order to reconstruct surfaces that lie in the near-field of sparse interferometric arrays.     

宏观地震忽略吸收确定震源深度问题的通解及其精确度

分析G-R-闵公式后得出,它是从点源幅射场导出的,与地震宏观场不相应。因在近场震源不能视作点源。在分析过程中,导出相当于点源、线源或面源以及复杂源的幅射场的深度公式。对实际的地震,它的源类型一无所知,所以不预作假定,将源指标几何扩散率n作为待定参数,导出了一个物理意义明确而又普遍化的震源深度公式。此公式的诸解法中,以计算方法准确、精度高,作图法有直观的优点,但准确性差、精度低,图算法只作获取粗略值和考察数据均匀性用。计算了9个8级以上巨震、1个71/2大震,和两个M_L=3的有感地震的震源深度,经对比结果很好,利用计算得出震源类型,结合宏观场研究了这些地震的震源几何学。并且首次在国际上给出宏观地震震源深度值的标准误差。     

Moment tensor inversion of some aftershocks of the April 18, 1985 Luquan earthquake of Yunnan Province, China

Based on the three component accelerograms, recorded at near-field distance by a temporary seismic network consisting of digital cassette tape recording accelerographs, the focal mechanisms of three aftershocks of the April 18, 1985, Luquan, Yunnan Province, China, earthquake ofM _S=6.1, are calculated using seismic moment tensor inversion technique. The phases of direct P, S and converted SP waves in the displacement seismograms, produced by twice integrations of the observed accelerograms, are identified via forward calculation using Green’s functions for homogeneous semi-infinite elastic medium, and used in the inversion. The results of inversion show that a better fit of synthetic to the observed seismograms of direct as well as converted phases can be achieved if appropriate weighting functions are used in solving the over definite linear equations. While these aftershocks are of different magnitudes (M _L=4.8, 3.2 and 3.5, respectively) and hypocentral locations, their focal mechanisms are very similar and consistent with that of the main shock. This feature demonstrates the intrinsic correlation between the occurrence of aftershocks and the seismogenic fault of main shock. Our experimentations show that using the near field accelerogram obtained from the digital seismic network with appropriate azimuthal coverage on the focal sphere, with the aid of even simple medium model, not only the shear dislocation source, but also the isotropic part and CLVD (compensated linear vector dipole) can be retrieved by the technique of moment tensor inversion. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 412–419, 1991. This work is supported by the Chinese Joint Seismological Sciences Foundation and the Western Yunnan Earthquake Prediction Test Site (WYEPTS), State Seismological Bureau.