锦屏Ⅰ级水电站坝区岩体结构面特征研究

本文根据锦屏Ⅰ级水电站坝区体结构面野外调资料，对坝区结构面优势方位、间距、张开度、连通率、隙间充填物及形态特征进行了分析，为坝区岩体分类及其物理力学参数的确定提供了重要依据。     

任意圆弧形凸起地形中隧洞对入射平面SH波的影响

借助辅助函数的思想， 采用波函数展开法给出了圆弧形凸起地形中隧洞对入射平面SH波影响问题的一个解析解．数值结果表明，凸起地形中隧洞的存在以及隧洞大小，对凸起地形表面运动，以及凸起地形中的隧洞的动应力集中均具有显著影响．      

Geometric form of Haiyuan fault zone in the crustal interior and dynamics implications

The deep seismic reflection data on profile HY2 are reprocessed by the method of simultaneous inversion of velocity distribution and interface position. By the travel-time inversion with the data of the diving wave Pg and fault plane reflection wave, we determine the geometric form and velocity of Haiyuan fault zone interior and surrounding rock down to 10 km depth. The measured data show that the amplitudes have strong attenuation in the range of stake number 37–39 km, suggesting the fault zone has considerable width in the crustal interior. The results of this paper indicate that to the north of the fault zone the crystalline basement interface upheaves gradually from southwest to northeast and becomes shallow gradually towards northeast, and that to the south of the fault zone, within the basin between Xihua and Nanhua mountains, the folded basement becomes shallow gradually towards southwest. The obliquity of the fault zone is about 70° above the 3 km depth, about 60° in the range of the 3–10 km depths. From the results of this paper and other various citations, we believe that Haiyuan fault zone is in steep state from the Earth’s surface to the depth of 10 km. Foundation item: Joint Seismological Science Foundation of China (201001) and State Key Basic Research Development and Programming Project (95-13-02-02). Contribution No. RCEG200308, Exploration Geophysical Center, China Earthquake Administration.     

红透山矿床变质岩系褶皱构造特征浅析

红透山式铜-锌矿床形成于太古代克拉通裂谷槽盆中海底火山喷发-沉积环境。因此，矿床的空间展布严格受特定的含矿岩系所控制。槽盆构造中的岩层褶皱构造最发育，矿床赋存在具多期褶皱构造叠加的大型同倾向形褶皱内，褶皱的层间虚脱是控矿有利构造空间，可以借此预测矿体侧伏方向及赋存部位。     

Soil moisture potential and water content in the unsaturated zone within the arid Ejina Oasis in Northwest China

Three soil profiles were selected in the Ejina Oasis, northwest China, to determine water content profiles and evolution of soil moisture potentials in the unsaturated zone within the arid area. The total soil moisture potentials have been monitored for about 3 months in 2001 at different depths in the soil profiles. The occurrence and movement of water in the unsaturated zone was analyzed using the zero flux plane (ZFP) method. It is shown that convergent ZFPs and divergent ZFPs may occur at depths between 0.5 and 3.0 m, and that the depth of the ZFPs was controlled by the root zone of plants growing on the land surface. Profiles of the total soil moisture potentials were observed to be coincident with those of the water contents at the three experimental sites. The total soil moisture potential showed a slight increasing trend and the ZFPs tend to vanish from summer to winter as the water extraction by roots decreased. Evapotranspiration through vegetation has an important bearing on the water content and the total potential in the unsaturated zone.     

Modeling the 2D behavior of dry‐stone retaining walls by a fully discrete element method

The dry‐stone retaining walls (DSRW) have been tipped as a promising solution for sustainable development. However, before recently, their behavior is relatively obscure. In this study, discrete element method (DEM) approach was applied to simulate the plane strain failure of these walls. A commercial DEM package (PFC2D™) was used throughout this study. The authors used a fully discrete approach; thus, both the wall and the backfill were modeled as discrete elements. The methodology for obtaining the micromechanical parameters was discussed in detail; this includes the three mechanical sub‐systems of DSRWs: wall, backfill and interface. The models were loaded progressively until failure, and then the results were compared with the full‐scale experimental results where the walls were loaded, respectively, with hydrostatic load and backfill. Despite its complexity and its intensive calculation time, DEM model can then be used to validate a more simplified approach. Copyright © 2015 John Wiley & Sons, Ltd.     

面向WebGL的矢量数据三维绘制技术

矢量数据的叠加显示能够提高三维虚拟地球的表达效果与分析能力。受限于GPU的计算精度,在三维虚拟地球中矢量数据绘制普遍存在抖动现象和深度冲突现象。对基于WebGL的矢量数据三维绘制中计算精度问题进行了分析,提出了使用CPU RTC技术和GPU RTE技术提高顶点变换的精度,使用多视锥渲染算法和深度平面技术解决深度缓存精度问题。实验证明,这几种技术和算法可以有效缓解抖动现象和深度冲突现象导致的视觉干扰,改善了各种尺度和范围的矢量数据在三维地形上的叠加显示效果。     

受控定向钻进技术在福建马坑矿区的应用

重点介绍了福建马坑矿区ZK8321分支孔受控定向钻进技术。施工中运用了国内先进的螺杆钻造斜技术及光纤陀螺测量定向技术,避开上部复杂孔段（松散破碎层、溶洞地层、采空区等）及对勘探工作的影响,达到了施工目的;总结了施工技术难点与措施,分析了施工技术效果,积累了宝贵的施工经验。     

Is Ziarat a Potential Site for Conventional or Unconventional Energy Resources?

A structural interpretation of the Ziarat block in the Balochistan region (a part of the Suleiman Fold and Thrust Belt) has been carried out using seismic and seismological data. Seismic data consists of nine 2.5D pre‐stack migrated seismic lines, whereas the seismological data covers the Fault Plane Solution and source parameters. Structural interpretation describes two broad fault sets of fore and back thrusts in the study area that have resulted in the development of pop‐up structures, accountable for the structural traps and seismicity pattern in terms of seismic hazard. Seismic interpretation includes time and depth contour maps of the Dungan Formation and Ranikot group, while seismological interpretation includes Fault Plane Solution, that is correlated with a geological and structural map of the area for the interpretation of the nature of the subsurface faults. Principal stresses are also estimated for the Ranikot group and Dungan Formation. In order to calculate anisotropic elastic properties, the parameters of the rock strength of the formations are first determined from seismic data, along with the dominant stresses (vertical, minimum horizontal, and maximum horizontal). The differential ratio of the maximum and minimum horizontal stresses is obtained to indicate optimal zones for hydraulic fracturing, and to assess the potential for geothermal energy reservoir prospect generation. The stress maps indicate high values towards the deeper part of the horizon, and low towards the shallower part, attributed to the lithological and structural variation in the area. Outcomes of structural interpretation indicate a good correlation of structure and tectonics from both seismological and seismic methods.