The Pindos Fold-and-thrust belt (Greece): inversion kinematics of a passive continental margin

Continuous exposure in the Pindos mountain chain (Greece) and the detailed stratigraphic measurements in the area enable us to construct eight balanced cross sections across the Pindos Fold-and-thrust belt (PFTB) and to approach quantitatively some parameters which controlled foreland evolution. The 160-km-wide passive continental margin of the Apulian continent in Greece was progressively shortened from east to west at rates of 6 mm/year between the Early Oligocene and Late Eocene. From the rear to the frontal part of the wedge, fault-bend folds, duplexes and imbricates were formed, while strain was partitioned into faulting (~34%), layer parallel shortening (~23%) and buckling (~9%). Foreland subsidence and internal deformation of the orogenic wedge are strongly affected by two parameters of equal importance: the thrust load of the overthrusted microcontinents and the rigidity of the underthrusted Apulian passive margin. Changes in the thickness of the pre-orogenic sediments and reactivated transform faults induced salients. During the Lower Miocene, the orogenic wedge in the Peloponnese suffered additional uplift and westward gravitational gliding induced by the intracontinental subduction of the Palaeozoic rift zone of the Phyllite-Quartzite Series, which was reactivated and returned to the earths surface during the Hellenic orogeny.     

Timing of deformation in the Norseman-Wiluna Belt, Yilgarn Craton, Western Australia

Establishing relative and absolute time frameworks for the sedimentary, magmatic, tectonic and gold mineralisation events in the Norseman-Wiluna Belt of the Archean Yilgarn Craton of Western Australia, has long been the main aim of research efforts. Recently published constraints on the timing of sedimentation and absolute granite ages have emphasized the shortcomings of the established rationale used for interpreting the timing of deformation events. In this paper the assumptions underlying this rationale are scrutinized, and it is shown that they are the source of significant misinterpretations. A revised time chart for the deformation events of the belt is established. The first shortening phase to affect the belt, D₁, was preceded by an extensional event D_1e and accompanied by a change from volcanic-dominated to plutonic-dominated magmatism at approximately 2685–2675 Ma. Later extension (D_2e) controlled deposition of the ca 2655 Ma Kurrawang Sequence and was followed by D₂, a major shortening event, which folded this sequence. D₂ must therefore have started after 2655 Ma—at least 20 Ma later than previously thought and after the voluminous 2670–2655 Ma high-Ca granite intrusion. Younger transcurrent deformation, D₃–D₄, waned at around 2630 Ma, suggesting that the crustal shortening deformation cycle D₂–D₄ lasted approximately 20–30 Ma, contemporaneous with low-volume 2650–2630 Ma low-Ca granites and alkaline intrusions. Time constraints on gold deposits suggest a late mineralisation event between 2640–2630 Ma. Thus, D₂–D₄ deformation cycle and late felsic magmatism define a 20–30 Ma long tectonothermal event, which culminated with gold mineralisation. The finding that D₂ folding took place after voluminous high-Ca granite intrusion led to research into the role of competent bodies during folding by means of numerical models. Results suggest that buoyancy-driven doming of pre-tectonic competent bodies trigger growth of antiforms, whereas non-buoyant, competent granite bodies trigger growth of synforms. The conspicuous presence of pre-folding granites in the cores of anticlines may be a result from active buoyancy doming during folding.     

数字航空摄影测量学方法在活动构造中的应用

为了高效率、高精度地获取活动构造研究中的定量参数, 引入数字航空摄影测量学方法十分必要.在川西地势陡峻的鲜水河断裂带上进行了试验性研究, 探讨了测量精度和效率, 总结了工作流程与操作方法.利用空间信息增强的正射纠正影像、大比例尺地形图和地形剖面图, 获得康定南团结乡附近鲜水河断裂带康定段断层迹线的空间分布, 量测得到该断裂在T1洪积扇形成以来左旋水平位移量为43 m, 垂直位移量为5.8 m.结果表明, 利用数字航空摄影测量学方法进行活动构造地貌研究中水平累积位移量、垂直累积位移量、断层长度等定量参数的测量以及构造几何学精细解析与构造地貌成图完全能满足精度要求, 大大提高了野外工作效率, 是活动构造定量研究的一种有效的技术方法.      

Coherent Chemical Variation Trends of the 55-25 Ma Magmatic Rocks in SE Tibet:N-S Direction Lithospheric Stretching of Eurasia during Early Stage of India-Eurasia Collision

The progressive indentation of India into Eurasia generated an E–W-trending orthogonal collision belt and a N–S-trending oblique collision belt. Compiling available data reveals that ～70% of the Cenozoic igneous rocks in eastern and southeastern Tibet are concentrated within an ENE-trending, ～550-km long and ～250-km wide magmatic zone(CMZ) that once separated the orthogonal and oblique collision belts. The Latitude 26°N Line is now its southern boundary. The onset timing of magmatism of the CMZ ...     

从亚洲大陆块体拼贴过程看大陆造山带的形成与演化

本文就亚洲大陆喜马拉雅造山带和大别-苏鲁造山带构造演化模式进行详细评述,并据大地构造学和古地磁学最新研究成果讨论并总结大陆造山带形成与演化模式,即大陆碰撞造山带的演化可能涉及以下5个连续的过程: 碰撞旋转拼合陆内挤压反弹.     

Metamorphism and granite genesis in the Hidaka Metamorphic Belt, Hokkaido, Japan

The Main Zone of the Hidaka Metamorphic Belt is an uplifted crustal section of island-arc type. The crust was formed during early Tertiary time, as a result of collision between two arc–trench systems of Cretaceous age. The crustal metamorphic sequence is divided into four metamorphic zones (I–IV), in which zone IV is in the granulite facies. A detailed study of the evolution of the Hidaka Belt, based on a revised P–T–t analysis of the metamorphic rocks, notably a newly found staurolite-bearing granulite, confirms a prograde isobaric heating path, after a supposed event of tectonic thickening of accretionary sedimentary and oceanic crustal rocks. During the peak metamorphic event (c. 53 Ma), the regional geothermal gradient attained 33–40° C km^?1, and the highest P–T condition obtained from the lowest part of the granulite unit is 830° C, 7 kbar. In this part, X_H2O of Gt–Opx–Cd gneiss is about 0.15 and that of Gt–Cd–Bt gneiss is 0.4. The P–T–X_H2O condition of the granulite unit is well within a field where fluid-present partial melting of pelitic and greywacke metamorphic rocks takes place. This is in harmony with the restitic nature of the Gt–Opx–Cd gneiss in the lowest part of the granulite unit. The possibility that partial melting took place in the Main Zone is significant for the genesis of the peraluminous (S-type) granitic rocks within it. The S-type granitic rocks in this zone are Opx–Gt–Bt tonalite in the granulite zone, Gt–Cd–Bt tonalite in the amphibolite zone, and Cd–Bt–Mus tonalite in the Bt–Mus gneiss zone. The mineralogical and chemical nature of these strongly peraluminous tonalitic rocks permit them to be regarded as having been derived from S-type granitic magma generated by crustal anatexis of pelitic metamorphic rocks in deeper crust.     

青藏高原狮泉河-康西瓦地区 1:100万区域重力调查成果

利用最新取得的区域重力资料,参考航磁、遥感、区域地质资料,对青藏高原狮泉河-康西瓦地区重力场分区、断裂构造体系、构造单元、局部异常、深部构造、成矿远景区(带)等进行了研究.对阿尔金走滑断裂西南端的走向和延伸提出了一些新的看法;讨论了2条重力低值带的成因;推断了班公湖-怒江结合带下部莫霍面隆起的高度,从重力角度提出了对班公湖-怒江结合带的认识;认为青藏块体在拼合后地壳有2个加厚中心;新圈定了一个中、新生代沉积盆地,并进行了初步研究;结合地质、矿产、航磁等资料,初步划分出4个成矿远景区(带).     

变质作用、板块构造及超级大陆旋回

麻粒岩相超高温变质作用（GUHTM）主要发育于新太古代至寒武纪岩石中;推测在深部较年轻的,特别是新生代造山带岩石中也会有GUHTM存在。岩石中最初出现GUHTM记录意味着产生瞬时极高热流处的地球动力学发生了改变。许多GUHTM带可能发育于类似现代大陆弧后的构造背景中。在较热的地球上,超大陆及其裂解形成的循环组合,尤其是经岩石圈减薄的洋盆卷入到其外翻过程中可能产生比现代太平洋边缘更热的大陆弧后。中温榴辉岩 高压麻粒岩相变质作用（EHPGM）也是最先发现于新太古代岩石记录中,并发育于从元古宙至古生代岩石中。EHPGM带是对GUHTM带的补充,并经常认为是记录了从俯冲至碰撞造山作用的过程。在元古宙岩石记录中的蓝片岩明显记录了与现代俯冲作用相关的低热流梯度。以发育柯石英(±硬柱石)或金刚石为特征的硬柱石蓝片岩和榴辉岩（高压变质作用,HPM）及超高压变质岩（UHPM）主要是在显生宙形成。HPMUHPM记录了显生宙俯冲碰撞造山带早期碰撞过程中的低热流梯度及陆壳的深俯冲作用。尽管与直觉不同,在超级大陆聚敛期（Wilson旋回洋盆打开和关闭）的大陆地块增生过程,许多HPMUHPM带看来确实是通过小洋盆关闭而发育起来的,反映双重热体制的双重变质带仅发育于新太古代以来的岩石记录中。双重热体制是现代板块构造的特点,而双重变质作用则是板块构造在岩石记录中的特征性标志。尽管构造样式很可能不同,新太古代以来GUHTM和EHPGM带的发育证明“元古宙板块构造体制”的开始。以冷俯冲和大陆地壳深俯冲至地幔,以及其中的部分又从深达300 km处发生折返为标志,“元古宙板块构造体制”在新元古代进化为“现代板块构造体制”,这个转变可由岩石中的HPMUHPM证明。记录这种极端条件的变质带年龄是不一致的,而变质作用发生时间与各大陆岩石圈聚合到超级克拉通（如Superia/Sclavia）或超级大陆（如Nuna (Columbia), Rodinia, Gondwana, 和Pangea）的时间却是一致的。     

川西前陆盆地南部莲花山区地震剖面构造解释及构造特征研究

通过详细的地震剖面解释,结合川西前陆盆地演化史,阐明莲花山地区地下断层及褶皱的几何形态及特征。认为区内部分断层是继承先成断层发育而来,部分断层是喜马拉雅期运动的产物;部分断层存在断层反转现象;控制盆地内沉积的主要因素是几个大断层。     

东昆仑南部晚新生代逆冲推覆构造系统

通过对东大滩—东温泉地区的路线地质观测与构造填图,在东昆仑南部发现晚新生代大型逆冲推覆构造系统。沿低角度逆冲断层,早二叠世大理岩和早三叠世砂板岩自北向南逆冲推覆于古新统—始新统风火山群紫红色砾岩和渐新世砖红色砂砾岩之上,形成大量不同规模的飞来峰;沿主逆冲断层发育厚层断层角砾岩与断层泥,局部形成碳酸盐质糜棱岩。东昆仑南部逆冲推覆构造的发育时代为渐新世晚期—中新世早期,主要形成、活动时期为26～13.5Ma;估算最小逆冲推覆距离为30～35km,最小逆冲推覆运动速率为2.4～2.8mm/a。东昆仑南部晚新生代逆冲推覆构造运动与现今山脉快速隆升存在着动力学成因联系。