Photosynthesis-transpiration coupling model at canopy scale in terrestrial ecosystem

At the hypothesis of big leaf, an ecosystem photosynthesis-transpiration coupling cycle model was established by the scaled SMPT-SB model from single leaf to canopy, and model parameterization methods were discussed. Through simulating the canopy light distribution, canopy internal conductance to CO2 can be scaled from single leaf to canopy by integrating to canopy using the relationship between single internal conductance and photosynthetic photon flux density. Using the data observed by eddy covariance method from the Changbai Mountains site of ChinaFLUX, the application of the model at the canopy scale was examined. Under no water stress, the simulated net ecosystem photosynthesis rate fitted with the observed data very well, the slope and R2 of the line regression equation of the observed and simulated values were 0.7977 and 0.8892, respectively (n = 752), and average absolute error was 3.78 μmol CO2 m-2s-1; the slope, R2 and average absolute error of transpiration rate were 0.7314, 0.4355 and 1.60mmol H2O m-2 s-1, respectively (n = 752). The relationship between canopy photosynthesis,transpiration and external environmental conditions was discussed by treating the canopy as a whole and neglecting the comprehensive feedback mechanism within canopy, and it was noted that the precipitation course affected the transpiration rate simulation badly. Compared to the models based on eco-physiological processes, the SMPT-SB model was simple and easy to be used. And it can be used as a basic carbon and water coupling model of soil-plant-atmosphere continuum.     

Changes in the spatial scale of Beijing UHI and urban development

The seasonal and interannual variations of Beijing urban heat island (UHI) are investigated in this paper using the temperature data from 1960 to 2000 at 20 meteorological stations in the Beijing region, and then the relationship between the intensity and spatial scale of UHI and Beijing urbanization indices is analyzed and discussed. Main conclusions are the followings. First, Beijing UHI shows obvious seasonal variations, and it is strongest in winter, next in spring and autumn, and least in summer. The seasonal variation of the UHI mainly occurs in the urban area. The UHI intensity at the center of Beijing is more than 0.8℃ in winter, and only 0.5℃ in summer. Second, the intensity of Beijing HUI exhibits a clear interannual warming trend with its mean growth rate (MGR) being 0.3088℃/10 a. The MGR of HUI is largest in winter, next in spring and autumn, and least in summer, and the urban temperature increase makes a major contribution to the growth of HUI intensity. Third, since the Reform and Opening, the urbanization indices have grown several ten times or even one hundred times, the intensity of HUI has increased dramatically, and its spatial scale also expanded distinctively along with the expansion of urban architectural complexes. Fourth, the interannual variation of urbanization indices is very similar with that of HUI intensity, and their linear correlation coefficients are significant at a more than 0.001 confidence level.     

Stability and accuracy analysis of the central difference method for real‐time substructure testing

The central difference method (CDM) that is explicit for pseudo‐dynamic testing is also believed to be explicit for real‐time substructure testing (RST). However, to obtain the correct velocity dependent restoring force of the physical substructure being tested, the target velocity is required to be calculated as well as the displacement. The standard CDM provides only explicit target displacement but not explicit target velocity. This paper investigates the required modification of the standard central difference method when applied to RST and analyzes the stability and accuracy of the modified CDM for RST. Copyright © 2005 John Wiley & Sons, Ltd.     

Pseudo‐dynamic seismic response of reinforced concrete frames infilled with non‐structural brick masonry

This paper presents pseudo‐dynamic test results on the in‐plane seismic behaviour of infilled frames. Thirteen single‐storey, single‐bay, half‐size‐scale, reinforced concrete‐frame specimens, most of which infilled with non‐structural masonry made of perforated bricks and cement mortar are tested. The infills are in contact with frames, without any connector; openings are not covered. The frames are different in their strength and details, reinforcement grade, and aspect ratio. Seismic input is the 1976 Tolmezzo (Friuli, Italy) ground acceleration, to which specimens are subjected two times: virgin and damaged by the previous test. The global seismic response of initially virgin infilled specimens considerably differs from that of bare specimens. This follows a dramatic change of properties: compared to a bare frame, the initial stiffness increases by one order of magnitude, and the peak strength more than doubles. The peak drift lessens; however, the displacement ductility demand does not. The energy demand is greater. Nevertheless, the influence of infill decreases as damage proceeds. Displacement time histories of damaged specimens are quite similar. At the local level, infill causes asymmetry and concentration of the frame deformation. Copyright © 2005 John Wiley & Sons, Ltd.     

A practical method for estimating dynamic soil stiffness on surface of multi‐layered soil

It is important to estimate the influence of layered soil in soil–structure interaction analyses. Although a great number of investigations have been carried out on this subject, there are very few practical methods that do not require complex calculations. In this paper, a simple and practical method for estimating the horizontal dynamic stiffness of a rigid foundation on the surface of multi‐layered soil is proposed. In this method, waves propagating in the soil are traced using the conception of the cone model, and the impulse response function can be calculated directly and easily in the time domain with a good degree of accuracy. The characteristics of the impedance, that is the transformed value to the frequency domain of the obtained impulse response, are studied using two‐ to four‐layered soil models. The cause of the fluctuation of impedance is expressed clearly from its relation to reflected waves from the lower layer boundary in the model. Copyright © 2005 John Wiley & Sons, Ltd.     

Developing efficient scalar and vector intensity measures for IDA capacity estimation by incorporating elastic spectral shape information

Scalar and vector intensity measures are developed for the efficient estimation of limit‐state capacities through incremental dynamic analysis (IDA) by exploiting the elastic spectral shape of individual records. IDA is a powerful analysis method that involves subjecting a structural model to several ground motion records, each scaled to multiple levels of intensity (measured by the intensity measure or IM), thus producing curves of structural response parameterized by the IM on top of which limit‐states can be defined and corresponding capacities can be calculated. When traditional IMs are used, such as the peak ground acceleration or the first‐mode spectral acceleration, the IM‐values of the capacities can display large record‐to‐record variability, forcing the use of many records to achieve reliable results. By using single optimal spectral values as well as vectors and scalar combinations of them on three multistorey buildings significant dispersion reductions are realized. Furthermore, IDA is extended to vector IMs, resulting in intricate fractile IDA surfaces. The results reveal the most influential spectral regions/periods for each limit‐state and building, illustrating the evolution of such periods as the seismic intensity and the structural response increase towards global collapse. The ordinates of the elastic spectrum and the spectral shape of each individual record are found to significantly influence the seismic performance and they are shown to provide promising candidates for highly efficient IMs. Copyright © 2005 John Wiley & Sons, Ltd.     

Evolutionary aseismic design and retrofit of structures with passive energy dissipation

A new computational framework is developed for the design and retrofit of building structures by considering aseismic design as a complex adaptive process. For the initial phase of the development within this framework, genetic algorithms are employed for the discrete optimization of passively damped structural systems. The passive elements may include metallic plate dampers, viscous fluid dampers and viscoelastic solid dampers. The primary objective is to determine robust designs, including both the non‐linearity of the structural system and the uncertainty of the seismic environment. Within the present paper, this computational design approach is applied to a series of model problems, involving sizing and placement of passive dampers for energy dissipation. In order to facilitate our investigations and provide a baseline for further study, we introduce several simplifications for these initial examples. In particular, we employ deterministic lumped parameter structural models, memoryless fitness function definitions and hypothetical seismic environments. Despite these restrictions, some interesting results are obtained from the simulations and we are able to gain an understanding of the potential for the proposed evolutionary aseismic design methodology. Copyright © 2005 John Wiley & Sons, Ltd.     

森林沼泽景观区中大比例尺化探找矿工作方法的研究--记大梁金矿的发现

大梁金矿是通过森林沼泽景观区开展1：50000和1：25000地球化学测量及综合地质工作而发现的,证明采用的森林沼泽景观中大比例尺化探方法是行之有效的.     

Saprolite Remnants as Indicators of Pre-Glacial Landform Genesis in Southeast Sweden

Twenty‐six sites with remnants of gravelly saprolites (grus) have been located in southeast Sweden. Joint block hills (castle kopjes) and steep rock walls with weathered joints as well as rounded boulders are documented to have an origin in deep weathering and subsequent stripping of saprolites. The saprolite remnants and landforms result from the fragmentation of the re‐exposed sub‐Cambrian peneplain along fracture systems. Only shallow saprolites occur on the elevated intact parts of the sub‐Cambrian peneplain, while saprolites up to 20 m thick are encountered in areas where the sub‐Cambrian peneplain is fractured and dissected. Neogene uplift with reactivation of the weathering system is thought to be the main cause of saprolite formation. Deep weathering is thus judged to have been the major agent of landform formation in the study area, while glacial and glaciofluvial erosion has contributed mainly by stripping saprolites, detaching corestones, and plucking joint blocks along weathered joints.     

云南东北部拱王山末次冰期

1 Introduction The Gongwang mountains constitute one of the few high m ountains of irrefutable late Pleistocene glaciation in eastern China. This area is one of the m ost extensively studied Quaternary geologicallocationsin eastern China and the interpret…