A critical CAE analysis of the bottom shape of a multi stepped air cavity planing hull

One of the most important aspects, in the ACS and multi stepped hull design, is the choice of the geometrical shape of the cavity and the steps. In this article a complete experimental and numerical campaign on a multi stepped ACS has been carried out, varying the velocity and the air flow rate under the hull. The experimental tests have been conducted in an ITTC Towing Tank allowing to validate the numerical simulations obtained by means of a CFD U-RANSe (Unesteady Reynolds Averaged Navier-Stokes equations) code. The CFD setup is described in detail. From this campaign a critical analysis of the Froude number influence on the air cushion shape has been argued. The authors identified four different behaviours, from low to very high Froude numbers. The use of CFD has allowed to observe quantities of difficult evaluation by means of traditional experimental test, as e.g. the frictional component of the resistance, the airflow path lines and the volume of fraction in transversal and longitudinal sections. The results have been discussed.     

养殖裙带菜机械损伤防御应答的初步研究

以裙带菜(Undariapinnatifida(Harv.)Suringar)幼孢子体为材料,测定藻体对机械损伤的防御应答。结果显示:与对照组相比,机械损伤会诱导藻体内活性氧含量上升,以及抗氧化酶活性和抗氧化物含量的变化。当裙带菜受到机械损伤后,体内O2-和H2O2以及MDA等物质迅速积累,藻体的总抗氧化能力上升、CAT和POD活性在短时间内迅速升高、GSH和ASA迅速合成,从而在较短时间内控制活性氧以及MDA含量;与对照组相比,SOD活性仅在3h内高于对照组。该实验结果表明裙带菜幼孢子遭受机械损伤后的抗氧化系统会参与调节机体活性氧平衡,这种抗氧化机制的存在可以更快速、更节能、更有效地修复藻体所受损伤。     

Experimenta l study on ultrasonic propagation in water-based bentonite slurry

Drilling fluid is a common flushingmedium used in pile foundation, geological drilling and petroleum drilling. Study on ultrasonic propagation properties in drilling fluid is of vital importance, not only for developing equipments to non-contact measuring concrete casting level for bored pile, but also for developing equipments considering drilling fluid as signal channel. The existence of clay particlesmakes the ultrasonic propagation and attenuation in drilling fluid much different from pure water. In order to know the relation among ultrasound frequency, slurry density and depth, a series of laboratory experiments about ultrasound propagation in water-based bentonite slurry were finished. Wavelet method was adopted to process the gained original waves of ultrasonic propagation in slurry, so we knew the velocity and attenuation coefficient of ultrasound propagated in different drilling fluids with different density. The first group experiments shows that with density of drilling fluid increase, ultrasonic velocity will decrease but attenuation coefficient will increase if ultrasonic frequency keep constant. The second group experiments shows that the power of ultrasound will intensify in small bore hole, the attenuation coefficient ismuch smaller than theoretical value.     

Static performance of power-augmented ram vehicle model on water

An experimental parametric study of a novel air-assisted platform-type model called power-augmented ram vehicle is described. The zero-speed regimes of the model over the water are investigated. The recovered thrust, pressure underneath the platform, and the model attitude are recorded for variable system geometry, loading conditions, and propulsor thrust. The stern flap under the model platform provides an effective mechanism for controlling the thrust recovery and the air-jet-induced lift. Unstable behavior of the model is found at sufficiently high levels of the propulsor thrust.     

Spatial changes in a macrozoobenthic community along environmental gradients in a shallow brackish lagoon facing Sendai Bay, Japan

The spatial distribution, abundance, and assemblage structure of macrozoobenthos were examined at 45 stations in a brackish lagoon (Idoura Lagoon, Japan) to examine the animal–environmental relations in estuarine soft-bottom habitats. We found a total of 23 taxa; the polychaetes Heteromastus sp., Hediste spp., and Prionospio japonica and the isopod Cyathura muromiensis numerically dominated the community. Cluster analysis and one-way analysis of similarity (ANOSIM) identified seven groups of stations that had significantly different macrozoobenthic communities; these were subsequently consolidated into five habitat groups according to their association with environmental characteristics. Canonical correspondence analysis (CCA) showed that salinity, silt-clay content, and the oxidation–reduction potential (ORP) of the sediment strongly affected the macrozoobenthos distribution pattern in the lagoon, whereas other factors (e.g., relative elevation of the habitat and sediment organic content) had much weaker effects. Similarity percentages (SIMPER) procedures indicated that the polychaete Notomastus sp. and the bivalve Macoma contabulata were specific to habitats with low salinity and reduced mud, whereas the bivalve Nuttallia olivacea was specific to sandy bottoms. Heteromastus sp. and Hediste spp. achieved their highest densities in rather oxidized sediments. The acid-volatile sulfide (AVS) content in the sediment was suggested as another possible factor affecting macrozoobenthic density. Our results clearly demonstrate that macrozoobenthic assemblages in estuarine soft-bottoms have high spatial heterogeneity on a small scale (e.g., hundreds of meters) related to physical and chemical environmental changes. Our data also suggested the importance of sediment redox condition (e.g., ORP and AVS content) and sediment grain size as structuring factors in estuarine soft-bottom communities as well as the salinity in the habitat.     

Mapping benthic habitat in regions of gradational substrata: An automated approach utilising geophysical,geological, and biological relationships

The relationship between acoustic backscatter, sediment characteristics and benthic habitat is examined using high-resolution sidescan sonar data collected at the Loch Linnhe artificial reef site on the west coast of Scotland. The site is typical for the continental shelf of NW Europe, with a mix of seabed environments from muddy to coarse, stony substrata on a 10–100 m length scale. A sidescan sonar mosaic was produced and classified according to derived backscatter parameters (mean, median and standard deviation of the backscatter values) using an unsupervised classification procedure. The accuracy of the final classified map was assessed by comparison with a ground-truthing survey in which the biological habitat was derived from underwater video footage. The sidescan correctly predicted seabed surface characteristics of observed biological habitat with 78% accuracy. A second, and more challenging test of the acoustic data to correctly predict biological habitat was made by comparing it with data from 21 grab sampling stations. These stations were divided into three groups using multivariate statistical techniques based on their backscatter properties. Benthic assemblage structure was found to be significantly distinct between the high and low, and the medium and low backscatter stations. There was a low to moderate but significant correlation between the multivariate patterns of acoustic backscatter, benthic assemblage structure, and particle size distribution. The work shows that even in areas with subtle and gradational changes in substratum, the sidescan was able to predict biological community with an acceptable accuracy.     

Distribution of phytoplankton community in relation to environmental parameters in cage culture area of Sepanggar Bay,Sabah, Malaysia

This paper covers spatial and temporal variation in phytoplankton communities and physico-chemical water properties in the cage culture area of Sepanggar Bay, Sabah, Malaysia based on field measurement conducted during July 2005 to January 2006 to study the spatial and temporal variation in phytoplankton communities and physico-chemical water properties of the bay. Phytoplankton samples and water parameters data were collected from five different stations located inside the bay during Southwest, Interseasonal and Northeast monsoons. Forty phytoplankton genera, representatives of 23 families, were found in the study area with a mean abundance of 1.55 ± 1.19 × 10⁶ cells L⁻¹. Most of these genera belong to diatoms (82.17%), Dinoflagellates (17.55%) and cyanobacteria (0.29%). Three genera were found to be dominant (>10%) in phytoplankton abundance and these were Coscinodiscus spp. (36.38%), Chaetoceros spp (17.65%) and Bacteriastrum spp. (10.98%). The most dominant genus was Coscinodiscus spp. which showed high abundance during all monsoons and stations (except Station 3). Among the seven environmental parameters tested in this study, water temperature, pH and suspended sediment concentration were found to be significantly different between monsoons. On the other hand, no significant differences were found between stations for the studied physico-chemical parameters. A clear differences in phytoplankton densities were observed between monsoons and stations with higher mean abundances during interseasonal monsoon (2.40 ± 1.37 × 10⁶ cells L⁻¹) and at station five (2.05 ± 0.74 × 10⁶ cells L⁻¹), respectively. Conversely, the diversity indices, both Shannon–Wiener (H^′)$\left(H^{\prime }\right)$ and Pielou (J^′)$\left(J^{\prime }\right)$, showed no significant difference throughout stations and monsoons (except (H^′)$\left(H^{\prime }\right)$ for monsoons). Analysis of similarity (ANOSIM) results demonstrated temporal differences in phytoplankton community structure with highly diverse phytoplankton assemblage. Through cluster analysis five groups of phytoplankton were attained (at 40% similarity level) though no marked separation of the taxonomic classes pointed towards the constant pattern of the phytoplankton assemblage in the studied area.     

Large-scale dune erosion tests to study the influence of wave periods

Large-scale physical model tests were performed to quantify the effects of the wave period on dune erosion. Attention was focussed on 2D cross-shore effects in a situation with sandy dunes and extreme water levels and wave conditions. Besides profile measurements, detailed measurements in time and space of water pressure, flow velocities and sediment concentrations were performed in the near near-shore area. It was concluded that a longer wave period leads to a larger dune erosion volume and to a larger landward retreat of the dune face. Tests with double-peaked wave spectra showed that the influence of the spectral shape on dune erosion was best represented by the T_m − 1,0 spectral mean wave period, better than the peak wave period, T_p. The effect of the wave period on dune erosion was implemented in a dune erosion prediction method that estimates erosion volumes during normative storm conditions for the Dutch coast. More details of the measurements and additional analyses of physical processes are described in an accompanying paper by Van Thiel de Vries et al. [Van Thiel de Vries, J.S.M., van Gent, M.R.A., Reniers, A.J.H.M. and Walstra, D.J.R., submitted for publication. Analysis of dune erosion processes in large scale flume experiments, In this volume of Coastal Engineering.].     

流体替代技术及应用分析

地震技术是研究隐蔽油气藏的关键技术。岩石物理是地震信号与储层性质之间的桥梁,它可以帮助我们更好的理解岩石和流体性质的地震响应。流体替代分析是岩石物理分析的重要部分,它是流体识别和储层定量研究的工具之一,在AVO分析中起了重要的作用。流体替代的理论基础是Gassmann方程。在岩石物理技术指导下,对某工区探井进行了流体替代分析,并根据替代后的结果分析了波阻抗随深度、岩性和含油气性变化的规律,同时根据替代结果进行了AVO正演研究,比较分析了储层中流体分别为盐水、气和油时的响应特征,并据此根据实际的部分叠加道集进行了烃类异常识别。     

The new wave overtopping database for coastal structures

Significant effort has been made to generate a homogeneous database on wave overtopping consisting of more than 10,000 irregular wave overtopping tests from more than 160 independent projects or test series, each described by means of 31 parameters. Many coastal structures, including dikes, rubble mound breakwaters, berm breakwaters, caisson structures and combinations have been considered and have been schematised for inclusion in the database. All these overtopping tests are represented by over 300,000 numbers in the database.