Last glacial emplacement of methane-derived authigenic carbonates in the Sea of Japan constrained by diatom assemblage,carbon-14, and carbonate content

We studied diatom assemblages and CaCO₃ contents of methane-derived authigenic carbonates from the eastern margin of the Sea of Japan and assessed the formation time of these samples. Radioactive ¹⁴C date was determined in selected samples to obtain the maximum age of the time. The results of our study suggest mass formation of carbonate nodules in a glacial period within ∼40 ky, consistent with a published U/Th dating result of carbonate nodules in the study area. Diatom assemblages and contents in the carbonate nodules (abundance of ∼10⁶/g, dominance of neritic-littoral species, warm/cold water species ratio lower than ∼25) differ from the near-seafloor sediments in the study area, which have characteristics of Holocene sediments in the Sea of Japan, and suggest cementation of glacial sediments. Laminated sediments in some nodule samples are glacial sediments because laminations are records of a low sea level period in the semi-enclosed ocean. Similarity of diatom assemblages and contents in all carbonate samples is another evidence of glacial sediments in nodules. Glacial sediments with oceanic cold water species as low as Holocene sediments restricts the sediment age to before 20 cal. ky BP. Carbonate contents higher than 78 wt% suggest the cementation of poorly compacted sediments near the seafloor, and the date of carbonate cementation is, therefore, close to that of the cemented sediments. Most carbonate nodule samples in this study were formed in a glacial period and detection of ¹⁴C restricts this period to within ∼40 ky.     

Serpulids living deep: calcareous tubeworms beyond the abyss

Although the carbonate compensation depth (CCD) for calcite, generally located in the depth range 4000–5000 m, is often proposed as a physiological barrier to deep-ocean colonization, many organisms with calcareous exoskeletons are found in the deepest oceanic trenches. Serpulid polychaetes inhabiting unprotected calcareous tubes are unlikely deep-sea inhabitants, yet, they are found at all oceanic depths from intertidal to hadal. Here we review and revise the published and unpublished records of Serpulidae from below 5000 m depth. We also describe tube ultrastructure and mineralogical content of available deep-sea serpulid tubes to obtain insights into their biomineralisation. Species belonging to the genera Bathyditrupa, Bathyvermilia, Hyalopomatus, Pileolaria (spirorbin) and Protis were found at depths from 5020 to 9735 m. However, only specimens of Protis sp. were truly hadal (>6000 m) being found at 6200–9700 m. Hadal specimens of Protis have irregularly oriented prismatic tube microstructure similar to that found in more shallow-water representatives of the genus. Initial EDX analysis suggested a mostly calcitic composition (i.e., the most stable CaCO₃ polymorph) on the basis of high Mg levels. Surprisingly, however, tubes of Bathyditrupa hovei and a species of Protis analysed using the more reliable method of laser Raman spectroscopy were found to be composed of aragonite. The compensation depth for this less stable CaCO₃ polymorph in the oceans is usually 2000–3000 m. We found no obvious structural adaptations to life at extreme depths in the studied serpulid tubes and how serpulids are able to biomineralise and maintain their tubes below the CCD remains to be explained.     

Warming and depth convergence of the Arctic Intermediate Water in the Canada Basin during 1985-2006

The warming of the Arctic Intermediate Water (AIW) is studied based on the analyses of hydrographic observations in the Canada Basin of the Arctic Ocean during 1985-2006. It is shown that how the anomalously warm AIW spreads in the Canada Basin during the observation time through the analysis of the AIW temperature spatial distribution in different periods. The results indicate that by 2006, the entire Canada Basin has almost been covered by the warming AIW. In order to study interannual variability of the AIW in the Canada Basin, the Canada Basin is divided into five regions according to the bottom topography. From the interannual variation of AIW temperature in each region, it is shown that a cooling period follows after the warming event in upstream regions. At the Chukchi Abyssal Plain and Chukchi Plateau, upstream of the Arctic Circumpolar Boundary Current (ACBC) in the Canada Basin, the AIW temperature reached maximum and then started to fall respectively in 2000 and 2002. However, the AIW in the Canada Abyssal Plain and Beaufort Sea continues to warm monotonically until the year 2006. Furthermore, it is revealed that there is convergence of the AIW depth in the five different regions of the Canada Basin when the AIW warming occurs during observation time. The difference of AIW depth between the five regions of the Canada Basin is getting smaller and smaller, all approaching 410 m in recent years. The results show that depth convergence is related to the variation of AIW potential density in the Canada Basin.     

基于QuikSCAT卫星遥感风场的台风最大风速半径反演及个例分析

建立了一种卫星遥感风场的最大风速半径(Rmax )反演方法.该方法基于 QuikSCAT 风场,结合 JTWC 台风参数资料,将遥感平均风剖面与 Holland 台风模型进行最小二乘法拟合来反演 Rmax.2001-2009年13个台风69幅数据反演结果统计分析表明:用气压表征台风强度的 P 算法遥感反演结果与 JTWC 分析结果的标准差为10.7 km,效果较好.此外,通过0513、0519和0221 3个典型台风过程的 Rmax 演变情况分析表明:对于对称性结构较好的成熟台风,反演结果能较好地反映出不同台风的 Rmax 尺寸差别,台风过程中 Rmax 的演变情况符合台风发展情况;台风风场对称性差、地形以及背景流场的影响,是导致 Rmax 反演出现较大偏差主要因素.     

波致液化粉质土有效应力变化的试验数据分析

海床不稳定性的现象很多都是海底液化引起的。根据之前的研究,粉土在液化之后有效应力会依然存在,关于波浪作用下海床液化之后有效应力变化的研究很少。采用波浪水槽实验,在未液化和液化2种情况下,分别施加不同波高的波浪,对底床各层位土体孔隙水压力进行采集,并对比研究。实验结果表明,液化后有效应力的相对值相对于液化前有很明显的减小,并且在深度上表现出显著的差异性,这种差异性随着波高的增大而减小。当相同深度处同一种波高作用一定时间时,有效应力会出现极大值,然后有效应力会减小。     

Cost-effectiveness of the Baltic Sea Action Plan

The governments around the Baltic Sea have agreed on a new set of targets for nutrient load reductions. The major motive for this is new and better knowledge about the link between nutrient loads and water transparency in different parts of the sea. The Baltic Sea Action Plan (BSAP) defines target for transparency in different marine basins, the load reductions necessary to meet transparency targets and a scheme for the distribution of the abatement burden between countries adjacent to the sea.     

Movement patterns of individual migrating western rock lobster,Panulirus cygnus,in Western Australia

Abstract

Migrating and pre‐migrating western rock lobster Panulirus cygnus were tagged with datastorage tags that recorded temperature and pressure, which was converted to depth (Pressure (kPa) — surface pressure (kPa)/10)) at Dongara and Jurien Bay in Western Australia between December 2005 and December 2007. All lobsters were fitted with tag flotation devices, and returns were made by either commercial fishers or beachcombers who located detached tags. A total of 135 lobsters were released with “backpack” flotation tags, but only 84 (62.2%) of the backpacks carried data‐storage tags. Depths of release ranged from 5 to 113 m. Of the tagged lobsters released, commercial fishers recaptured 52 (38.5%), whereas 11 tags (8.1%) were found by beachcombers. At least 33%, and possibly up to 63%, of animals identified by their pale coloration as pre‐migrating individuals, failed to migrate. Those that did migrate (n = 11) were at liberty from 1 to 94 days and showed generally similar movement patterns in that they migrated only at night from darkness (after 2000 h) until after moonrise. However, their movement patterns were less constrained by the rising of the moon in deep water. Only 27% migrated nightly, compared with 73% that skipped migrating on one or more nights, to restart some days later. This latter proportion would likely have been considerably greater, but some migrating animals were only at large for short periods before recapture, and therefore had little time to show any variation to the nocturnal migration pattern. Individual speeds of migration during periods of activity were estimated for nine lobsters as 0.20 to 0.68 km h^?1, with a mean speed of 0.44 km h^?1, or 7.4 m min^?1. Improved knowledge of daily movement patterns resulting from this study provides a potentially important input into technological improvements in bait and pot design.     

A System for Fast Cartographic Sounding Selection

Soundings on nautical charts provide information about the shape of the ocean bottom between chart depth curves. A single chart may have thousands of soundings posted on it. This article describes a system for automatic cartographic sounding selection. In this system, a new algorithm for automated selecting soundings is developed. The algorithm is employed in such a way that it can guarantee (a) fast and accurate selecting sounding, (b) processing the circular depth curves, (c) solving the overplotting problems between depth curves and soundings, and (d) keeping selected soundings “prettier.” The system was intensively tested using real data sets, and its superiority has been revealed by the testing results.     

Automatic tracing of the foot of the continental slope

The UNCLOS III (Article 76, Section 4(b)) defines the foot of the continental slope as the point of maximum change in the gradient at its base. It is impossible to locate so defined afoot and thus to trace the foot‐line objectively by eye. In this study we show a method designed automatically to detect and trace the foot‐line of the continental slope from an irregular array of bathymetrical data. Our algorithm first transforms the bathymetric surface to a maximum curvature surface. On this new surface, the foot‐line corresponds to one of the ridges; instead of tracing the foot‐line on the bathymetric surface, we now can trace the ridges on the maximum curvature surface. The tracing of the ridges can be done automatically and objectively and the foot‐line is identified as being one of these ridges. We devote particular attention to the case when the ridge‐line is not defined, i.e., to the case when the point of maximum gradient change becomes a region of maximum gradient change.     

Application of High Energy Dynamic Compaction in Coastal Reclamation Areas

High energy dynamic compaction (HEDC) is adopted in a coastal reclamation area because the grain size of backfilled soil mostly ranges between 20 cm and 100 cm. The in situ tests for evaluating the effectiveness of HEDC were performed on the backfilled soil ground. The crater depth per drop and the whole test zone elevations before and after HEDC were measured and analyzed. Dynamic penetration tests and spectral analysis of surface wave (SASW) tests were used for investigating the improvement depth. Furthermore, the allowable bearing capacity of HEDC treated ground was determined based on the results of plate-load tests. It was found that HEDC did not cause the ground surface heave during construction, and was more effective than low energy dynamic compaction (LEDC) in terms of applied energy utilization. Based on the test results, the improvement depth of HEDC at this site was not less than 14 m, and there was no obvious weak layer within the range of improvement depth. The allowable bearing capacities were larger than 160 kPa. The investigation results indicate that the HEDC technique is an effective way for improving backfilled coarse-grained soil in coastal reclamation areas. This technique helps to achieve both greater improvement depths and higher ground bearing capacities as compared with LEDC.