数学形态学的合并综合算子研究

针对当前地图综合算子的研究难点,引入了数学形态学相关理论,建立了基于形态学的合并综合算子模型.并利用建立的合并算子,结合矢量数据模型和栅格数据模型的相互转化,进行了街区的合并实验,取得了较好的效果.     

江苏省沿海区域水环境容量计算研究

在江苏省沿海开发战略发展的背景下,研究海洋水体环境容量是实施海洋污染物总量控制和合理利用海洋资源的基础和前提。以江苏省沿海区域(包括连云港、盐城、南通在内的沿海三市)作为研究对象,根据人海排污口排污方式的不同,将沿海排污区域划分为沿岸区域和离岸区域两部分,分别建立了2种区域的水环境容量计算方法。结合近岸海域二维水动力水质模型和污染物通量计算模型对三市的沿海区域水环境容量、人海河流污染物通量分别进行了测算。在此基础上测算得到2007年沿海三市污染排放贡献率,并通过污染排放贡献率计算得到沿海三市最大允许人海量。结果表明,江苏省沿海区域COD的水环境容量为1 249 231 t/a,其中沿岸海域水环境容量为968 921 t/a,离岸海域水环境容量为280 310 t/a,沿海三市的COD排放贡献率为44%;江苏省沿海区域氨氮的水环境容量为73 658 t/a,其中沿岸海域水环境容量为47 728t/a,离岸海域水环境容量为25 930 t/a,沿海三市的氨氮排放贡献率为65%。该研究成果可为江苏省沿海区域开发中的环境保护提供技术支撑。     

河北省数字电磁扰动应用研究

通过数字与模拟观测对比分析,说明数模观测的一致性,结合近几年河北省及邻区中强地震,进行震例分析和研究.应用结果表明：数字与模拟观测变化一致性较好;震前数字电磁扰动出现异常变化,异常形态为：原始采集波形出现扰动变化、日均值或日总量出现高值突跳、日总量背景值上升等.     

数字洞体摆倾斜观测常见干扰分析

分析临汾地震台数字摆倾斜观测中常见干扰及曲线形态变化特征,并对同一干扰源造成两摆式倾斜仪曲线形态的差异性进行探讨,希望对观测资料中异常的判断、仪器维护、数据预处理及地震预测预报应用研究等具有一定参考意义。     

风成沙波纹数学模型综述

风成沙波纹是风力作用下地表形成的最基本的地貌类型。近年来,随着计算机技术的迅猛发展,风成沙波纹数值模拟研究越来越引起重视。本文简要介绍了风成沙波纹数学建模的理论基础,并将已有的风成沙波纹数学模型划分为3类,着重介绍了几个经典的风成沙波纹数学模型,详细列举了这些模型的假设条件和数学表达,分析了他们的优缺点。目前,风成沙波纹数学建模的两个基本理论依据为:一个是地表坡度变化导致的蠕移沙通量的变化;另一个是跃移长度随沙床面高度变化的规律,但目前关于此理论的研究并不多。最后,总结和展望了这一领域的研究方向和前景。     

不同坡向梭梭幼苗的生长状况和适应特征

以古尔班通古特沙漠南缘一年生梭梭移栽苗为研究对象,对梭梭幼苗的地上部分生长状况、蒸腾速率日变化趋势以及根系形态进行了调查,探讨不同坡向梭梭幼苗的生长和适应特征。结果表明,平地、阴坡和阳坡表层0~30 cm土壤含水量无显著差异,40~100 cm土壤含水量阳坡<阴坡<平地。梭梭幼苗同化枝生长速率和含水量均表现为阳坡<阴坡<平地,其生长速率和含水量可能与根层土壤含水量高低有关。不同坡向梭梭幼苗蒸腾速率日变化均呈“单峰型”,12:00-16:00阳坡梭梭幼苗蒸腾速率显著高于阴坡与平地。 阳坡梭梭幼苗主根不发达,侧根较多但较短;平地和阴坡梭梭幼苗根系主根发达,以单根为主。这反映出根系对相应生境下土壤水分的适应特征。     

Identification of steps and pools from stream longitudinal profile data

Field research on step–pool channels has largely focused on the dimensions and sequence of steps and pools and how these features vary with slope, grain sizes and other governing variables. Measurements by different investigators are frequently compared, yet no means to identify steps and pools objectively have been used. Automated surveying instruments record the morphology of streams in unprecedented detail making it possible to objectively identify steps and pools, provided an appropriate classification procedure can be developed.To achieve objective identification of steps and pools from long profile survey data, we applied a series of scale-free geometric rules that include minimum step length (2.25% of bankfull width (W_b)), minimum pool length (10% of W_b), minimum residual depth (0.23% of W_b), minimum drop height (3.3% of W_b), and minimum step slope (10° greater than the mean slope). The rules perform as well as the mean response of 11 step–pool researchers who were asked to classify four long profiles, and the results correspond well with the channel morphologies identified during the field surveys from which the long profiles were generated. The method outperforms four other techniques that have been proposed. Sensitivity analysis shows that the method is most sensitive to the choice of minimum pool length and minimum drop height.Detailed bed scans of a step–pool channel created in a flume reveal that a single long profile with a fixed sampling interval poorly characterizes the steps and pools; five or more long profiles spread across the channel are required if a fixed sampling interval is used and the data suggest that survey points should be located more frequently than the diameter of the step-forming material. A single long profile collected by a surveyor who chooses breaks in slope and representative survey points was found to adequately characterize the mean bed profile.     

Measurements and numerical simulations of the degree of activity and vegetation cover on parabolic dunes in north-eastern Brazil

In this work we present measurements of vegetation cover over parabolic dunes with different degrees of activation along the north-eastern Brazilian coast. We extend the local values of the vegetation cover density to the whole dune by correlating measurements with the relative brightness index C of high resolution QuickBird panchromatic satellite images of the dune field. We then introduce the vegetation data into a continuous model for vegetated dunes, coupling sand erosion and vegetation growth, and perform simulations of the evolution of the morphology and vegetation cover of parabolic dunes. Finally, from the comparison of both, the measurements and the simulation results, we show that the model is able to predict the dune shape and the vegetation distribution of real parabolic dunes as result of the evolution of a blow-out.     

Controls on coastal dune morphology, shoreline erosion and barrier island response to extreme storms

The response of a barrier island to an extreme storm depends in part on the surge elevation relative to the height and extent of the foredunes which can exhibit considerable variability alongshore. While it is recognized that alongshore variations in dune height and width direct barrier island response to storm surge, the underlying causes of the alongshore variation remain poorly understood. This study examines the alongshore variation in dune morphology along a 11 km stretch of Santa Rosa Island in northwest Florida and relates the variation in morphology to the response of the island during Hurricane Ivan and historic and storm-related rates of shoreline erosion. The morphology of the foredune and backbarrier dunes was characterized before and after Hurricane Ivan using Empirical Orthogonal Function (EOF) analysis and related through Canonical Correlation Analysis (CCA). The height and extent of the foredune, and the presence and relative location of the backbarrier dunes, varied alongshore at discrete length scales (of ~ 750, 1450 and 4550 m) that are statistically significant at the 95% confidence level. Cospectral analysis suggests that the variation in dune morphology is correlated with transverse ridges on the inner-shelf, the backbarrier cuspate headlands, and the historical and storm-related trends in shoreline change. Sections of the coast with little to no dune development before Hurricane Ivan were observed in the narrowest portions of the island (between headlands), west of the transverse ridges. Overwash penetration tended to be larger in these areas and island breaching was common, leaving the surface close to the watertable and covered by a lag of shell and gravel. In contrast, large foredunes and the backbarrier dunes were observed at the widest sections of the island (the cuspate headlands) and at crest of the transverse ridges. Due to the large dunes and the presence of the backbarrier dunes, these areas experienced less overwash penetration and most of the sediment from the beachface and dunes was deposited within the upper-shoreface. It is argued that this sediment is returned to the beachface through nearshore bar migration following the storm and that the areas with larger foredunes and backbarrier dunes have smaller rates of historical shoreline erosion compared to areas with smaller dunes and greater transfer of sediment to the washover terrace. Since the recovery of the dunes will vary depending on the availability of sediment from the washover and beachface, it is further argued that the alongshore pattern of dune morphology and the response of the island to the next extreme storm is forced by the transverse ridges and island width through alongshore variations in storm surge and overwash gradients respectively. These findings may be particularly important for coastal managers involved in the repair and rebuilding of coastal infrastructure that was damaged or destroyed during Hurricane Ivan.     

基于流域形态完整系数的泥石流容重计算方法

通过对四川山区20条典型泥石流沟道的现场调查,建立了流域形态完整系数与泥石流浆体容重的统计关系,通过拟合分析形成了基于流域形态完整系数泥石流容重的指数式计算公式,获取了回归曲线,并采用误差分析、影响因素分析及趋势分析验证了该计算公式的合理性。研究表明,泥石流流域形态对泥石流浆体容重有很大影响,在区域地质背景条件相似时,浆体容重随流域形态完整系数的增大而减小。当流域形态完整系数大于0.3时,形成的泥石流多为稀性泥石流,且逐步向水石流、夹砂水流的状态发展,浆体容重可达到1.28t/m3的极值,这与目前观测到的泥石流容重最小值相符。基于统计关系所建立的拟合公式尤其适用于流域形态完整系数较大的桦叶形泥石流沟,可为无法观测（已暴发或难以到达）的泥石流沟容重的计算提供简便方法,亦可为容重参数的合理确定提供区域性参考。