冻结饱水单裂隙岩体力学特性试验研究

通过相似单裂隙岩体冻结三轴试验,研究裂隙倾角、迹长、隙宽、围压和温度对单裂隙岩体力学特性的影响,试验结果表明：裂隙岩体力学参数与倾角呈二次函数分布,与迹长呈指数函数分布,通过拟合式（3）可近似计算岩体强度;岩体强度与围压呈线性分布,负温条件下泊松比和弹性模量受围压影响较小;隙宽小于0.1 mm或大于0.8 mm时,岩体强度随隙宽增大而减小,隙宽在0.1～0.8 mm之间时,岩体力学参数几乎不受隙宽影响;岩体强度随温度降低而增大的作用机制是岩体孔隙水和裂隙水冻结成冰,增大了颗粒间的凝聚力和摩擦角;裂隙倾角影响破裂面的起始位置,迹长影响破裂面的扩展规模,围压影响破裂面的延伸方向;倾角对岩体强度影响最大,迹长次之,温度影响最小。     

浙江海域天竺鲷科鱼类新纪录种—黑边银口天竺鲷(Jaydia truncata)形态特征与DNA条形码研究

2015年10月中旬,在浙江省舟山市近海的渔业资源调查中采集到天竺鲷标本,经鉴定发现其中黑边银口天竺鲷为浙江新纪录种。本文对采集的6尾黑边银口天竺鲷标本拍摄照片并开展形态特征和DNA条形码研究,对该种的拉丁学名进行校正。黑边银口天竺鲷的有效学名为Jaydia truncata(Bleeker,1854)。具有以下主要形态特征:背鳍鳍条数VII+I,9,胸鳍鳍条数16—17;背前鳞数4;第一鳃弓总鳃耙数3—4+11—13,发达鳃耙数1+9—10,角鳃弓上的鳃耙数9;前鳃盖骨边缘锯齿状;第一背鳍上端黑色,第二背鳍及尾鳍边缘黑色,第二背鳍与臀鳍中部各具一黑色纵纹。本研究分析了浙江海域5种天竺鲷科鱼类的形态差异,并编制了检索表。测定了6尾标本的DNA条形码,结合Gen Bank中所有学名为Jaydia truncata及其同种异名的同源序列分析,发现所有个体明显分为两个分支,且两者遗传距离达到0.149,表明两分支可能为不同的有效种,Gen Bank中只有AB890050和JQ681488与本研究序列结果相近。     

Universal model forms for predicting the shear modulus and material damping of soils

Numerous model forms have been used to predict the dynamic behaviours of soils, mainly the shear modulus and material damping. These models are used to represent normalised shear modulus reduction and material damping curves. The majority of the existing models are empirical and were proposed for specific soil types, strain ranges, etc. Some are limited to the data used in fitting, but fail to provide a good fit to other sets of data. The available model functions are not universal, which means that a model developed for one soil type may not be applicable for use with other soil types. In this paper, two universal mathematical models were proposed to predict the normalised shear modulus reduction and material damping curves. The mathematical model forms are sufficiently flexible to be widely used with different soil types. The models were evaluated using verification data of eight different soil types, i.e., data that were not used to fit the model parameters. The results indicate that the proposed model forms can accurately model the dynamic soil properties within the typical earthquake range. The advantage of developing the two universal models are two-fold, first the forms are applicable for sand, clay, and fibre-soil composite and second with further testing of soils, the model coefficients could ultimately be used to further understand the physical processes in soil behaviour, especially damping.     

基于GIS的四平市城市扩展遥感分析

本文以吉林省四平市为例,选取1976、1979、1991、2001和2007年MSS、TM、ETM+的5个时相遥感图像,对其进行处理、解译,以城市面积变化、分维数、紧凑度等作为指标,对该市31年来城市扩展及其特点进行研究。结果表明,四平市在31年内的城市扩展可分4个阶段,其中,1979-1991年城市扩展速度最快,而2001-2007年城市扩展速度也较快,而且更注重城市的内涵建设,这与四平市经济发展情况相符合。说明城市形态指数与统计数据结合可以更充分地描述城市扩展的特征和过程。     

Application study of coupled model between reservoir organic pollutant BOD5-DO and temperature

The BOD5-DO (Biochemical Oxygen Demand in five days and Dissolved Oxygen) are important indexes that reflect the organic pollution extent of water,but the variation of the indexes is closely related with water temperature.The study on the coupled mathematical model reflecting the BOD5-DO with temperature is the key to reveal the mechanism of the migration and distribution of BOD5-DO in the water.The authors presented 1-D mathematical model for the three variables in vertical direction,and gave accurate solution for the equations under steady state,the relation among the variables and the method for solving BOD5-DO concentrations at different depth and temperature.     

Lithological and fluvial controls on the geomorphology of tropical montane stream channels in Puerto Rico

An extensive survey and topographic analysis of five watersheds draining the Luquillo Mountains in north‐eastern Puerto Rico was conducted to decouple the relative influences of lithologic and hydraulic forces in shaping the morphology of tropical montane stream channels. The Luquillo Mountains are a steep landscape composed of volcaniclastic and igneous rocks that exert a localized lithologic influence on the stream channels. However, the stream channels also experience strong hydraulic forcing due to high unit discharge in the humid rainforest environment. GIS‐based topographic analysis was used to examine channel profiles, and survey data were used to analyze downstream changes in channel geometry, grain sizes, stream power, and shear stresses. Results indicate that the longitudinal profiles are generally well graded but have concavities that reflect the influence of multiple rock types and colluvial‐alluvial transitions. Non‐fluvial processes, such as landslides, deliver coarse boulder‐sized sediment to the channels and may locally determine channel gradient and geometry. Median grain size is strongly related to drainage area and slope, and coarsens in the headwaters before fining in the downstream reaches; a pattern associated with a mid‐basin transition between colluvial and fluvial processes. Downstream hydraulic geometry relationships between discharge, width and velocity (although not depth) are well developed for all watersheds. Stream power displays a mid‐basin maximum in all basins, although the ratio of stream power to coarse grain size (indicative of hydraulic forcing) increases downstream. Excess dimensionless shear stress at bankfull flow wavers around the threshold for sediment mobility of the median grain size, and does not vary systematically with bankfull discharge; a common characteristic in self‐forming ‘threshold’ alluvial channels. The results suggest that although there is apparent bedrock and lithologic control on local reach‐scale channel morphology, strong fluvial forces acting over time have been sufficient to override boundary resistance and give rise to systematic basin‐scale patterns. Copyright © 2010 John Wiley and Sons, Ltd.     

非均匀表皮效应对各向异性稳态承压井流的影响

考虑表皮效应竖向非均匀分布,建立各向异性承压层3D稳态井流数学模型,为求得问题的解,首先将表皮效应系数视为分段连续函数,再根据该分段函数将承压层划分成N层,然后通过差分法将问题转化为求解矩阵微分方程边界值问题,最后通过矩阵理论求得相应问题的解。应用数学软件对所求得解进行编程,并应用于实例计算和分析中。结果表明,在距竖井较近处,承压层水头降和流量沿竖向分布均与表皮效应系数函数变化趋势相反,即承压层某深度处的表皮效应系数越大（小）,则相应位置的水头降和流量越小（大）;而距竖井较远处,仅当竖向渗透系数相对于水平渗透系数较小时,才仍具有前述变化规律;承压层不同深度处的水头降沿径向的分布曲线的幅度值,不仅取决于该处的表皮效应系数大小,而且取决于竖向渗透系数与水平渗透系数相对值大小     

有自由面渗流分析的三维数值流形方法

提出了求解有自由面渗流问题的三维数值流形方法,通过构造任意形状流形单元的水头函数,推导了流形单元的渗透矩阵和无压渗流分析的总体控制方程,并给出了自由面的迭代求解策略和渗透体积力的计算方法。典型算例的数值分析表明,该方法采用数学网格覆盖整个材料区域,在自由面的迭代求解过程中数学网格保持不变,只考虑自由面以下渗流区的介质,只对自由面以下的流形单元形成总体渗透矩阵,具有精度高、收敛速度快、编程简单等优点,而且能够通过单纯形积分精确计算被自由面穿越单元的渗透作用力,因此,特别适用于有自由面渗流问题的模拟。     

Bed morphological changes around a finite patch of vegetation

For the appropriate management and restoration of rivers, isolated vegetation is often a practical means for improving stream habitat and ecology. The effect of a finite vegetation patch on flow and bed morphology in an open channel was investigated using laboratory experiments. The patch containing emergent and submerged vegetation was modeled using circular cylinders and located mid‐channel along a side wall. Several configurations of the patch and submergence ratio (i.e. water depth to the height of vegetation), and two flow conditions (i.e. below and above the sediment motion threshold) were considered. For flows below the sediment motion threshold, erosion occurred primarily on the opposite side of the patch and near the leading edge of the patch. The degree of scouring depth observed in both these regions was affected by the submergence ratio and it increased with the non‐dimensional flow blockage (i.e. the product of the patch density and width). In contrast, for flows above the sediment motion threshold, sediment accumulated within and around the patch due to a reduction in bed shear stress, which was strongly influenced by the flow blockage and the obstruction ratio (i.e. the ratio of patch width to channel width). The eroded area observed within the patch was consistent with the interior adjustment region where the deceleration and diversion of flow occurred through the patch. As the flow blockage increased or as the obstruction ratio decreased, the deposition rate within and behind the patch decreased. Furthermore, the deposition rate increased with an increase in the ratio of flow rate through the patch to total flow rate regardless of the submergence ratio. Copyright © 2014 John Wiley & Sons, Ltd.     

抛石挤淤深度的计算方法和模型试验

在含水率大、抗剪强度低的淤泥中采用抛石挤淤的办法加固地基或建造围埝,处理效果好且经济效益显著,因此得到了广泛地应用。抛石在软弱地基中下沉,直至其重力与地基承载力平衡为止。挤淤所形成截面的形状及抛石下沉深度的计算是此项研究的重点,基于抛石截面为倒梯形和矩形两种形状的假定,考虑淤泥表面隆起对承载力的影响,利用土体极限平衡理论,推导出抛石挤淤深度与抛石高度的关系。通过抛石挤淤的模型试验和现场挤淤的数据,分析比较两种假定下挤淤公式的准确性和适用性,试验结果与公式吻合性很好,该研究结果可为相关工程的设计和施工提供参考。