Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

Pumping decisions for sustainable development of groundwater resources in areas of grassland degradation: a case study in Lanqi Banner, Inner Mongolia, China

The best planting alternatives for satisfying high water use demands of forage and fodder crops in a region of Inner Mongolia, China, were determined by a multiobjective distributed-parameter groundwater management model. These alternatives took account of different cropping patterns and pumping decisions associated with both temporal and spatial aspects of water allocation. The model was developed for phreatic, homogenous, and isotropic aquifers using the response matrix technique of quadratic programming theory and, in this case, using the alternative direction implicit (ADI) scheme. Model solutions using effective rainfall with a probability of 50%, show that average water table drawdown in the planning period (2006–2017) is 0.22 m and the groundwater fluctuation in each pumping well is very low. In order to evaluate the pumping decisions under an effective rainfall with a probability of 75%, a sensitive analysis was also conducted. Analysis shows that it is useful to apply the results from the proposed model to control the landscape degradation due to overgrazing and overpumping activities.     

Groundwater flow modeling for effective implementation of landslide stability enhancement measures

This paper deals with groundwater hydrology at a prominent fracture zone landslide slope (Nuta–Yone landslides) in Japan with an objective to explore an efficient method for the application of landslide stability enhancement measures. The correlation analyses between the hydrological parameters and ground surface movement data at this landslide resulted in low correlation values indicating that the geological formation of the area is extremely complex. For the purpose of understanding the groundwater flow behavior in the landslide area, a three-dimensional transient groundwater flow model was prepared for a part of the landslide slope, where the levels of effectiveness of applied landslide stability enhancement measures (in the form of multilayered deep horizontal drains) are different, and was calibrated against the measured water surface elevations at different piezometer locations. The parameter distributions in the calibrated model and the general directions of the groundwater flow in terms of flow vectors and the results of particle tracking at the model site were interpreted to understand the reasons for variations in effectiveness of existing landslide stability enhancement measures and to find potentially better locations for the implementation of future landslide stability enhancement measures. From the modeling results, it was also understood that groundwater flow model can be effectively used in better planning and locating the landslide stability enhancement measures.     

中国数字地质调查系统的基本构架 及其核心技术的实现

数字地质调查系统是贯穿整个地质矿产资源调查全过程的软件,涵盖地质矿产调查、矿产资源勘查、矿体模拟、品住估计、资源量估算、矿山开采系统优化等内容。考虑数字地质调查系统的应用技术层面,从数据“层”模型、数据流“池”技术、不同阶段数据模型继承技术、数据互操作技术等几个方面讨论了核心技术及其实现,通过基于无缝一体化技术的数据采集、管理、综合处理与成果表达,在实体或矿块的矿床建模技术与品住估计、储量估算等方面展现了全地质调查过程的数字化,不但为地质人员应用高新技术降低了门坎,而且极大地提高了研究精度和效率,丰富了成果的表现形式和服务形式。随着数字地质调查系统的完善和应用水平的提高,数字地质调查系统将成为中国地质调查的主流软件体系。     

Towards a nonperturbation transport theory in hetereogeneous aquifers

A large body of existing theories of flow and contaminant transport in aquifers ignore the presence of recharge, eliminate the boundary conditions, neglect transient conditions in groundwater flow, conceive hydraulic gradients as linear, and require parameter variability to be stationary and Gaussian. The most outstanding and difficult to justify assumption is the subjective small size of the stochastic terms (i.e., small perturbation methods), which usually is forced by considering the logarithm of the hydraulic conductivity. Several problems in flow and contaminant subsurface hydrology, such as the enhanced dispersion parameters with plume size or time after injection, remain to be observed in the light of a stochastic theory that allows a more realistic consideration of physical and hydrologic properties. In this article, an attempt is made to reformulate a contaminant transport equation (the variable dispersion equation, VDE) with transport parameters in terms of regional hydrologic and aquifer hydraulic properties, such as recharge rate, spatially random transmissivity, hydraulic gradient, aquifer thickness, and soil porosity. Subsequently, a general analytic procedure, the method of decomposition, is used to derive a solution to the VDE. This procedure does not require small perturbation, logarithmic transformations, or specific probability law assumptions. Comparison tests with existing theoretical and field results are given. The tests illustrate the enhanced dispersion and shifting concentration effects produced by the variable dispersion equation. Finally a generalization of the method to nonstationary dispersion in three-dimensional domains is proposed.     

Oil and gas resource assessment: The linkage between geological analysis and discovery process model results

Two widely-used techniques to estimate the volume of remaining oil and gas resources are discovery process modeling and geologic assessment. Both were used in a recent national assessment of oil and gas resources of the United States. Parallel estimates were obtained for 27 provinces. Geological-based estimates can typically see into areas not available to discovery process models (that is areas with little or no exploration history) and thus, on average, yield higher estimates. However, a linear relation does exist between the mean estimates obtained from these two methods. In addition, other variables were found in a multiple regression model that explained much of the difference. Thus, it is possible to perform discovery process modeling and adjust the estimates to yield results that might be expected from geological-based assessments.     

黄河下游断面形态与水沙输移关系及数学模拟方法

以前人对黄河下游的实测资料分析为基础,本文讨论断面形态与来水来沙关系、断面形态对输水输沙的影响,并根据实测资料,提出黄河下游弯段与直段断面冲淤变化的两种模式,建立了主流摆动及坍岸影响断面形态变化以及纵向冲淤量在断面的分布两种数学模拟方法。     

Interpolation by regularized spline with tension: I. Theory and implementation

Bivariate and trivariate functions for interpolation from scattered data are derived. They are constructed by explicit minimization of a general smoothness functional, and they include a tension parameter that controls the character of the interpolation function (e.g., for bivariate case the surface can be tuned from a membrane to a thin steel plate), Tension can be applied also in a chosen direction, for modeling of phenomena with a simple type of anisotropy. The functions have regular derivatives of all orders everywhere. This makes them suitable for analysis of surface geometry and for direct application in models where derivatives are necessary. For processing of large datasets (thousands of data points), which are now common in geosciences, a segmentation algorithm with a flexible size of overlapping neighborhood is presented. Simple examples demonstrating flexibility and accuracy of the functions are presented.On leave from the Department of Physical Geography and Cartography, Comenius University, Mlynská dolina, Bratislava, Czechoslovakia.On leave from the Institute of Physics, Dúbravská cesta 9, Bratislava, Czechoslovakia.     

内蒙古中西部宝音图群石榴角闪岩的地球化学、变质作用及年代学特征

宝音图群分布于内蒙古中西部狼山、图古日格和达茂旗一带，主要由云母片岩、石英片岩、石英岩、角闪岩和大理岩组成。在狼山格尔敖包沟和图古日格西南地区发育十分典型的石榴角闪岩，均以似层状或透镜状产自云母片岩中，但两地具有不同的矿物组合，前者主要以石榴石+角闪石+斜长石+含钛矿物（金红石和钛铁矿）为特征，后者主要以石榴石+角闪石+绿帘石+含钛矿物（金红石和钛铁矿）为特征。地球化学研究显示两个地区的石榴角闪岩原岩具有相似的化学组成，均为亚碱性玄武岩的拉斑系列。宝音图群的石榴角闪岩具有右倾的稀土配分模式，REE总量为83.31×10^-6~125.9×10^-6，（La/Yb）_N比值为2.17~6.48，δEu=0.87~0.98。Ta、Nb、Ti没有明显的负异常，其配分型式类似E-MORB特点。微量元素构造判别图解表明这些石榴角闪岩的原岩产于板内拉张环境中。本文通过模拟格尔敖包沟样品LS01和图古日格西南地区样品LS35的P-T视剖面图研究其变质作用及矿物演化过程，结果显示这两个样品均经历了早期进变质，峰期以及峰后近等温减压的顺时针型P-T轨迹。样品LS01的峰期温压条件为~11kbar/~735℃，模拟得到的峰期矿物组合可能为石榴石+角闪石+斜长石+黑云母+透辉石+金红石+熔体，P-M（H₂O）视剖面图显示，由于峰后演化过程中存在饱和流体渗透，导致峰期透辉石无法保留。样品LS35的峰期温度压力条件为~8kbar/675℃，其峰期组合为石榴石+角闪石+绿帘石+金红石。两个地区的石榴角闪岩的温度压力条件明显不同，推测宝音图群中呈透镜体或似层状产出的变质基性岩，存在着递增型的变质作用。锆石LA-ICP-MS U-Pb年代学的研究结果显示石榴角闪岩样品LS01的变质锆石年龄为394±8Ma。由此推测这些石榴角闪岩的原岩可能形成于华北北缘在新元古代发育的裂陷盆地，在泥盆纪中期，宝音图群作为华北克拉通的一部分，被卷入到与古亚洲洋闭合有关的造山过程，发育中压型递增变质作用。     

Characterizing heterogeneous permeable media with spatial statistics and tracer data using sequential simulated annealing

Characterizing heterogeneous permeable media using flow and transport data typically requires solution of an inverse problem. Such inverse problems are intensive computationally and may involve iterative procedures requiring many forward simulations of the flow and transport problem. Previous attempts have been limited mostly to flow data such as pressure transient (interference) tests using multiple observation wells. This paper discusses an approach to generating stochastic permeability fields conditioned to geologic data in the form of a vertical variogram derived from cores and logs as well as fluid flow and transport data, such as tracer concentration history, by sequential application of simulated annealing (SA). Thus, the method incorporates elements of geostatistics within the framework of inverse modeling. For tracer-transport calculations, we have used a semianalytic transit-time algorithm which is fast, accurate, and free of numerical dispersion. For steady velocity fields, we introduce a transit-time function which demonstrates the relative importance of data from different sources. The approach is illustrated by application to a set of spatial permeability measurements and tracer data from an experiment in the Antolini Sandstone, an eolian outcrop from northern Arizona. The results clearly reveal the importance of tracer data in reproducing the correlated features (channels) of the permeability field and the scale effects of heterogeneity.