片状微囊藻(Microcystis panniformis)——中国微囊藻属的一个新记录种

目前全球范围内先后有50多种微囊藻被描述记载,国内最新研究报道有12种.根据采自太湖的野外藻类样品,确定了中国微囊藻属的一个新记录种——片状微囊藻(Microcystis panniformis),对其分类学的形态特征进行详细的描述,并对其和分类学上相近的属种Pannus以及微囊藻属的鱼害微囊藻(M.ichthyoblabe)、铜绿微囊藻(M.aeruginosa)和水华微囊藻(M.flos-aquae)等的区分进行讨论.     

基于长时间序列(1975—2020年)生态耗水的岱海动态生态需水分析

生态需水是湖泊生态系统的重要指标,维持着湖泊生态系统的良性循环.以内蒙古中部半干旱湖泊岱海为研究对象,对湖泊动态生态需水进行分析.本研究在遥感和气象数据的基础上,获得1975-2020年长时间序列高精度水文要素数据,分析岱海水文要素时空演变规律;通过天然生态水深分析法、水深经验频率分析法和湖泊形态分析法分析岱海的水深随面积变化的关键水深;构建基于生态耗水规律的湖泊生态需水模型,计算自然状态下岱海生态需水动态变化范围.研究结果如下:岱海地区6-9月为丰水期,10月至次年5月为枯水期;45 a以来岱海水面面积呈显著下降趋势,近年来下降速率减缓;枯水期岱海适宜生态水深为8.72~9.92 m,丰水期为9.40~10.69 m,适宜生态需水量为5.62亿~7.71亿m³,适宜湖面面积为70.92~84.77 km².本文构建了长时间序列气候水文数据库,确定岱海动态生态需水范围可以实现对湖泊生态健康的实时监测,为相关规划与管理提供科学依据及可操作性指导,从而为岱海湖泊治理提供理论参考.     

外源氮磷负荷比增加对刺苦草（Vallisneria spinulosa）生长的影响

磷(P)是水生态系统生产力的限制因子,因此,在水体富营养化治理的过程中,许多地方采取了有效的措施控制流域P的排放;但氮(N)来源复杂,难以有效控制,导致湖泊外源的N∶P负荷比日益扩大.植物的生长需要合适的N∶P比,因此,外源N∶P负荷比的增加可能会对沉水植物的生长产生影响.采取控制实验,将刺苦草(Vallisneria spinulosa)栽种于塑料桶中,每隔3 d添加1次N、P营养盐,实验设置5个处理,P外源性负荷量固定为4 mg/(m~2·d),N外源性负荷量分别为0、40、80、120、160 mg/(m~2·d).实验周期为80 d.结果显示:随着N∶P负荷比的增加,刺苦草的叶干重、植株总干重、根干重、叶N及总N含量、叶片数、叶P及总P含量等指标基本保持不变或略有增加,单株总根长、根茎长度、块茎干重和无性系小株数目则呈现下降趋势.结果表明:随外源N∶P负荷比的增加,刺苦草个体生长指标总体呈现不变的趋势,但与种群扩张潜力相关的指标如根茎长度、块茎干重和无性系小株数目等则呈现下降趋势;刺苦草体内累积的N随外源N∶P负荷比的增加而增加,但P的累积保持不变.说明N∶P负荷比的增加对刺苦草个体生长影响不大,但对种群扩张不利;刺苦草对P的吸收也并不随N∶P比的增加而改变.     

鱼类形态特征与营养级位置之间关系初探

以长江中下游洪泛平原湖泊鱼类为例,探讨鱼类功能性形态特征与其营养级位置之间的关系.所用的116种鱼的食性数据来自于226个鱼类群落,总计16267尾鱼.用几何形态测量法的界标分析法提取鱼类形态特征,相对扭曲度法的前2个主成份能较好地区分鱼类的形态差异,它不仅能够生成散点图,而且能客观地反映出鱼类的形态性状.营养级位置采用肠含物定量分析法,合理地假定肠含物的营养级位置,利用食性数据计算出鱼类的营养级位置.采用广义加性模型分析鱼类营养级位置与功能性形态之间的关系.结果表明:只有当鱼类为植食性鱼类和肉食性鱼类才有特化的功能性形态与之相适应,植食性鱼类有较窄的口裂,而对肉食性鱼类而言,不同生活型的鱼类拥有各自特化的形态特征,如伏击型肉食性鱼类体型呈纺锤形,背鳍靠近头部,眼睛较大且靠上,头部面积较大;而追击型肉食性鱼类体型呈流线型,头部较小,背鳍和腹鳍靠近尾部.而杂食性鱼类在本研究中无更多证据证明有特化的外部形态,亟待进一步研究.     

胶西北新城金矿床硫同位素地球化学

新城金矿床是胶西北金矿集区中典型的破碎带蚀变岩型金矿床,其热液成矿作用可划分为四个阶段:黄铁矿-石英-绢云母阶段(I)、石英-黄铁矿阶段(II)、石英-多金属硫化物阶段(III)和石英-方解石阶段(IV),其中金主要赋存于II和III阶段的黄铁矿内。该矿床赋矿围岩为郭家岭岩体,岩性为石英二长岩和二长花岗岩,主要为胶东群变质基底经部分熔融形成。胶东群变粒岩硫同位素较为均一(δ34S值介于6.9‰~9.4‰,均值为8.0‰);郭家岭岩体的δ34S值介于6.0‰~16.0‰,均值为8.6‰,反映了其硫同位素组成总体上继承了变粒岩的硫同位素特征;长英质脉岩的δ34S值变化范围为0.8‰~8.5‰(均值为6.7‰),其中4件样品的δ34S值变化范围为7.4‰~8.5‰,反映了其硫主要源自于郭家岭岩体,变粒岩可能提供了部分硫源;而其中1件样品的δ34S值仅为0.8‰,符合岩浆硫来源特征,表明深部岩浆可能也提供了部分硫源。新城金矿床矿石中硫化物δ34S值变化范围较大(4.3‰~10.6‰,均值为8.3‰),表明矿石硫可能源于郭家岭岩体、变粒岩和长英质脉岩,最终主要来源于胶东群变质基底。I阶段黄铁矿颗粒较小(5~600μm),晶形主要为立方体,反映其处于温度较高(300~350℃)、成矿流体的过饱和度较低、低氧逸度和硫逸度、冷却快速、物质供应不足的成矿环境;黄铁矿δ34S值变化范围为8.4‰~10.6‰,均值为9.7‰,反映了矿石硫可能源自于δ34S值较高的郭家岭岩体和变粒岩。II和III阶段黄铁矿粒径变化较大(3μm~2.5mm),晶形主要为五角十二面体,反映其处于中-低温度(200~300℃)、成矿流体过饱和度高、高氧逸度和硫逸度、缓慢冷却同时物质供应充分的成矿环境。其中,II阶段黄铁矿δ34S值变化范围为7.7‰~9.7‰,均值为8.7‰,表明矿石硫源除郭家岭岩体和变粒岩外,δ34S值较低的长英质脉岩可能也提供了部分硫源。III阶段硫化物δ34S值变化范围较大(4.3‰~9.4‰,均值为7.1‰),闪锌矿-方铅矿硫同位素热力学平衡温度范围为180~282℃,氧逸度约为10-37.3~10-36.8,反映了矿石硫源自于郭家岭岩体、变粒岩和长英质脉岩,硫化物δ34S值变化范围较大可能是硫同位素分馏达到平衡的结果。IV阶段黄铁矿粒径最小(1~5μm),为晶形完好、表面光滑的立方体晶形,表明其处于较低温度(200℃),成矿流体的过饱和度较低、氧逸度和硫逸度较低、物质供应不足的成矿环境。     

Study on Effects of Building Morphology on Urban Boundary Layer Using an Urban Canopy Model

An urban canopy model is incorporated into the Nanjing University Regional Boundary Layer Model. Temperature simulated by the urban canopy model is in better agreement with the observation, especially in the night time, than that simulated by the traditional slab model. The coupled model is used to study the effects of building morphology on urban boundary layer and meteorological environment by changing urban area, building height, and building density.It is found that when the urban area is expanded, the urban boundary layer heat flux, thermal turbulence, and the turbulent momentum flux and kinetic energy all increase or enhance, causing the surface air temperature to rise up. The stability of urban atmospheric stratification is affected to different extent at different times of the day.When the building height goes up, the aerodynamic roughness height, zero plane displacement height of urban area, and ratio of building height to street width all increase. Therefore, the increase in building height results in the decrease of the surface heat flux, urban surface temperature, mean wind speed, and turbulent kinetic energy in daytime. While at night, as more heat storage is released by higher buildings, thermal turbulence is more active and surface heat flux increases, leading to a higher urban temperature.As the building density increases, the aerodynamic roughness height of urban area decreases, and the effect of urban canopy on radiation strengthens. The increase of building density results in the decrease in urban surface heat flux, momentum flux, and air temperature, the increase in mean wind speed, and the weakening of turbulence in the daytime. While at night, the urban temperature increases due to the release of more heat storage.     

Characterisation of Soot Emitted by Domestic Heating,Aircraft and Cars Using Diesel or Biodiesel

The characterisation of aggregates, like soot, firstly requires the determination of the size distribution of the primary particles. The primary particle size of combustion generated aggregates depends upon the combustion environment and the formation conditions, such as temperature, pressure and fuel-to-air ratio, among others. Since the combustion characteristics are different in the different types of burners, the characterisation of primary particles may offer the possibility to distinguish soot from different sources. In this paper, we present the signature of the primary particles and the aggregates of soot emitted by cars using diesel or biodiesel, by domestic heating, and by aircraft exhausts, which can be considered as the major sources as derived from measurements on transmission electron micrographs. The size distributions of all aggregates types with different aerodynamic diameter were log-normal and quasi-monodisperse. The size distribution of the primary particles for soot emitted by different sources showed minor differences. However, a comparison between the diameter of the primary particles and those obtained using a standard method for carbon black revealed discrepancies. The median diameter of the primary particles was combined with the median number of primary particles in an aggregate to calculate the relative particle surface area available for adsorption. In a similar way, the relative specific surface area was determined. The surface area was measured using the Brunauer-Emmett-Teller (B.E.T.) nitrogen adsorption method and the relative surface area available for adsorption was calculated.     

利用灰岩断层面形貌特征识别罗云山山前断裂古地震信息

以山西地堑系罗云山山前断裂的基岩断层面为例,用陆基Li DAR扫描获取了断层面形貌学数据,采用各向同性变差函数法计算了断层面形貌的分维值。结果显示,断层面形貌在高度上具有显著的分带性,每个分带的特征分维值随断层面高度的增加呈阶跃式变化。分析认为这种形貌特征可能反映了断层面与多次地震相关的间歇式出露方式。分带高度指示了约3m和1m的2组同震倾滑位移量,各分带之间的分维值过渡带是断层面缓慢剥露的结果。与片麻岩区的断层面形貌学研究结果相比,灰岩断层面形貌学分维值随着暴露时间的增加而减小,2种岩性区的断层面分维值D与断层面高度H呈现类似镜像的关系,在气候构造条件大致相同的情况下,考虑为岩性差异的影响。     

新月形沙丘迎风坡形态及沉积物对表面气流的响应

对孤立新月形沙丘迎风坡风速的野外实测和计算表明,沙丘迎风坡表面风速廓线呈非对数关系,近地面剪切风速和输沙强度由坡脚至丘顶总体呈递增趋势,但同时随断面坡度的增减而发生相应的变化;沿断面输沙率的变化导致蚀积强度的改变,表现为沙丘迎风坡坡度变缓的部位沉积大于侵蚀,其它部位侵蚀大于沉积,其中丘顶输沙率和侵蚀强度最大。在沙丘形态上,表现为坡度减缓的部位沉积变凸、其它部位因侵蚀变凹以及坡脚和丘顶的前移。变凸和变凹部位反过来又制约着表面剪切风速的相应变化。粒度分析也表明,沙丘迎风坡表面粒度特征主要取决于表面蚀积状况,同断面形态表现出密切的相关性。     

Experimental investigation of hydrate formation in water-dominated pipeline and its influential factors

Blockage in water-dominated flow pipelines due to hydrate reformation has been suggested as a potential safety issue during the hydrate production. In this work, flow velocity-dependent hydrate formation features are investigated in a fluid circulation system with a total length of 39 m. A 9-m section pipe is transparent consisted of two complete rectangular loops. By means of pressurization with gas-saturated water, the system can gradually reach the equilibrium conditions. The result shows tha...