三种类型烃-烃不混溶包裹体组合的特征和热力学条件的计算

在自然界广泛分布着烃-烃不混溶体系中捕获的流体包裹体,由于这些包裹体具有复杂的组成和相态,因此不混溶包裹体组合的判别和热力学参数的计算常常难以进行。根据烃-烃不混溶体系中两个端员组分流体包裹体室温下的相态特征和在温度-压力平面图上等容线交点显示的位置,划分成三种类型流体包裹体组合,本介绍了三种类型流体包裹体组合特征,叙述了不混溶烃-烃包裹体组合的测定和判别方法,并且阐述均一化包裹体相态方程和气-液平衡常数原理和方法与此同时列举了自然界简单的三种类型不混溶烃-烃包裹体组合的测定、判别和计算的几个实例,利用相态方程和气-液平衡常数,不但精确地计算出包裹体均一压力,并且精确地计算出流体密度和体积等热力学参数。最后,利用均一成气相和液相的两种包裹体在 p-T 平面图上等容线交点同样计算出流体包裹体组合的捕获温度和压力。     

A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.     

裂隙型单斜介质中弹性系数的计算及波的传播特性研究

根据Hudson等关于裂隙介质弹性系数计算的扰动理论及Bond变换矩阵原理，给出了各向同性介质中含多组垂直裂隙时等效弹性系数的计算方法。计算了含两组斜交的垂直裂隙形成的单斜各向异性介质中的等效弹性系数，并根据Christoffel方程推导、得出水平面内平面波传播的相速度和群速度随方位变化的特性。     

纤维素接枝丙烯酰胺/高岭土高吸水性复合材料研究

在高岭土的存在下，以N，N－亚甲基双丙烯酰胺作交联剂，以硝酸铈铵为引发剂微晶纤维素与丙烯酰胺进行接枝共聚反应，合成接枝纤维素／高岭土高吸水性复合材料。研究了纤维素与单体的配比、高岭土添加量、交联剂用量、引发剂用量及反应温度对吸水率的影响。用红外光谱表征复合材料的结构，用电子显微镜观察复合材料的表面与界面。结果表明，高岭土在接枝聚合物中能较好分散，复合材料吸水率达1166，对生理盐水溶液的吸水率达86。     

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.     

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.     

某地平板玻璃原料用石英砂的提纯研究

某地石英矿砂通过磁选分离法、稀酸浸泡法处理后，矿砂不同程度地降低了铁、铝、钙镁的含量；采用磁选分离 稀酸浸泡法联合处理后，使该地石英砂的化学成分达到了优质的生产平板玻璃用硅质原料的国家标准。     

压电双晶片双向大幅振动的探讨

通过压电陶瓷的逆压电效应对压电陶瓷双晶片在自动生产送料线上的应用研究，得出在二元系Ph(Ni1／3Nb2／3)O3-PhTiO3-PhZrO3的基础上作调整制作的压电双晶片。经运用在振动料斗上，作调频调幅控制。达到了压电双晶片振子结构，振子谐振频率为300Hz，当外加电压达300V时，振子偏转位移量大于1．7mm，故可作为一种理想的振动源。     

夏塞地区银、锡多金属矿成矿规律新认识

夏塞地区是西南三江(金沙江、澜仓江、怒江)地区东缘的一个重要成矿带，带内银、锡矿产责源十分丰富。本文认为其成矿物质来源于花岗岩体和地层，构造和岩体是区内的主要控矿因素，地壳演化与成矿作用关系十分密切，矿床类型为分布于岩体内接触带的矽卡岩型矿床和分布于岩体外接触带的热液型矿床。     

兰坪白秧坪铜银多金属矿床成矿物质来源的铅和硫同位素示踪

白秧坪铜银多金属矿床主要产于白垩系下统景星组石英砂岩、粉砂岩中，矿石铅同位素组成特征与景星组砂岩的铅同位素组成比较接近，表明壳源物质参与了成矿作用。作ZartMan图解和△γ—△β图解表明，矿石铅属于壳幔混合来源。矿石铅μ值介于9．43—9．65之间，Th/U比值介于3．72—3．87之间，表明矿石铅为壳幔混合铅。该矿床硫同位素组成表明，硫来源于深部地幔硫遭受地壳硫的混入。该矿床的成矿作用发生于开放体系之中，成矿物质来源为深部幔源物质混合了壳源物质。