A Connectivity Index for Discrete Fracture Networks

Connectivity is an important measure for assessing flow transport in rock, especially through fractures. In this paper, rock fracture systems are modelled by a discrete fracture model simulated by a marked point process. A connectivity index is then introduced to quantify the connectivity between any two points in space. Monte Carlo simulation is used to evaluate the connectivity index for stationary cases and relationships between the connectivity index and the parameters of the discrete fracture model are analysed. The average number of intersections per fracture, X_f, and the fracture intensity, P12 (P32), are calculated and the relationships between these parameters and the connectivity index are investigated, concluding that X_f is the more suitable parameter for the classification of rock mass flow properties. The relationships between the connectivity index and the percolation state of the fractured medium are also discussed. An edge correction is briefly discussed and a practical example is used to demonstrate the method of computing the connectivity index.     

A geochronological approach to understanding the role of solar activity on Holocene glacier length variability in the Swiss Alps

We present a radiocarbon data set of 71 samples of wood and peat material that melted out or sheared out from underneath eight presentday mid‐latitude glaciers in the Central Swiss Alps. Results indicated that in the past several glaciers have been repeatedly less extensive than they were in the 1990s. The periods when glaciers had a smaller volume and shorter length persisted between 320 and 2500 years. This data set provides greater insight into glacier variability than previously possible, especially for the early and middle Holocene. The radiocarbon‐dated periods defined with less extensive glaciers coincide with periods of reduced radio‐production, pointing to a connection between solar activity and glacier melting processes. Measured long‐term series of glacier length variations show significant correlation with the total solar irradiance. Incoming solar irradiance and changing albedo can account for a direct forcing of the glacier mass balances. Long‐term investigations of atmospheric processes that are in interaction with changing solar activity are needed in order to understand the feedback mechanisms with glacier mass balances.     

Retrieval of stratospheric O3 and NO2 vertical profiles using zenith scattered light observations

Daily zenith scattered light intensity observations were carried out in the morning twilight hours using home-made UV-visible spectrometer over the tropical station Pune (18‡31′, 73‡51′) for the years 2000–2003. These observations are obtained in the spectral range 462–498 nm for the solar zenith angles (SZAs) varying from 87‡ to 91.5‡. An algorithm has been developed to retrieve vertical profiles of ozone (O₃) and nitrogen dioxide (NO₂) from ground-based measurements using the Chahine iteration method. This retrieval method has been checked using measured and recalculated slant column densities (SCDs) and they are found to be well matching. O₃ and NO₂ vertical profiles have been retrieved using a set of their air mass factors (AMFs) and SCDs measured over a range of 87–91.5‡ SZA during the morning. The vertical profiles obtained by this method are compared with Umkehr profiles and ozonesondes and they are found to be in good agreement. The bulk of the column density is found near layer 20–25 km. Daily total column densities (TCDs) of O₃ and NO₂ along with their stratospheric and tropospheric counterparts are derived using their vertical profiles for the period 2000–2003. The total column, stratospheric column and tropospheric column amounts of both trace gases are found to be maximum in summer and minimum in the winter season. Increasing trend is found in column density of NO₂ in stratospheric, tropospheric and surface layers, but no trend is observed in O₃ columns for above layers during the period 2000–2003     

采矿引起的边坡倾倒滑移变形机理与变形安全性分析研究—以抚顺西露天矿边坡为例

在矿山开发、水电建设过程中倾倒变形问题日渐突出。倾倒变形边坡一般具有反倾边坡结构,变形的过程和机理比较复杂、涉及的变形岩体范围较大、危害严重。论文以抚顺西露天矿边坡为例,通过岩体位移监测资料的跟踪分析、底面摩擦模拟试验,以岩体力学、松散介质力学原理为理论基础,探讨了采矿影响下边坡倾倒滑移体的变形机理,分析认为采矿引起的倾倒滑移变形问题是在特定的地质构造和采矿工程条件下产生的,并提出了岩体变形安全性分析方法。通过工程实例,验证了方法的实用性,并针对实际问题提出了变形整治对策。     

洪山预测区煤层赋存的可能性分析

分析了洪山预测区西部洪山岩体地质特征及其向外围扩散的范围和程度，研究了北掌勘查区和焦窑煤矿两邻区煤层受岩浆岩影响的程度，认为洪山岩体对预测区煤系及煤层赋存的影响较小，岩体外围仍有煤系赋存。为下一步找煤指明了方向。     

湖北省巴东县黄土坡滑坡深部变形防治方案探讨

文章根据几年来从事黄土坡滑坡区的勘查、可研及现场工程管理的认识，从滑坡分布特征、物质构成、稳定研究、变形特征等方面对滑坡进行研究。针对该滑坡厚度巨大，滑体强度高，近期深部变形较明显的实情，作者以库仑定律为基础，提出采用岩土加固治理滑坡区深部滑移的初步治理方案。     

引黄水在北大港水库蓄存期水质咸化的研究

依据引黄水在北大港水库蓄存期水质咸化的事实以及传质理论,定性地分析了引黄水水质咸化的主要原因,包括盐碱土传质作用、蒸发浓缩作用以及风的扰动加速传质作用等.在北大港水库旁修建了一个模拟试验水池,进行了现场模拟试验研究.依据水量平衡和氯离子总量平衡的原理,分别定量地计算了传质作用和蒸发浓缩作用对水质咸化影响的比重.结果表明,在模拟水池蓄水后的30 d内,传质作用对水质咸化影响的比重有随时间增加而增长的趋势;30 d后,传质作用对水质咸化影响的比重稳定在80%,蒸发浓缩作用对水质咸化影响的比重稳定在20%,说明导致水质咸化的最主要因素是盐碱土传质作用.     

柯树背岩体的元素地球化学特征及其成矿意义

对柯树背岩体的岩石化学，稀土元素，微量元素及铀金成矿元素进行了系统的研究。研究结果表明：柯树背岩体F9大断裂（鹰潭－安远深大断裂）以东部分（东体）与F9大断裂以西部分（西体）在稀土分布模式，微量元素，铀金成矿元素及矿化特征上存在很大的差别，东体与寨背岩体类似，为同熔系列花岗岩，对铀成矿不利；西体为重熔再生岩浆成因的改造型花岗岩，对铀成矿有利，具有良好的成矿远景。     

基于土体中结构面的岩土工程问题探讨

土体中也存在结构面，并且结构面的存在与很多的岩土问题有关。为使土体中的结构面受到足够的重视，本文就其中的几个主要岩土工程问题进行了探讨，它们是：结构面对土体力学性质的影响、土体结构面对土体破坏的控制作用、有时可尝试用离散元等模型分析土体变形、土体中结构面上水的渗流和污染物的运移、结构面上土体力学参数问题、土坡稳定性问题、土与结构物的相互作用问题、土体中结构面与环境岩土工程问题等。     

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.