The sequence of sediment behaviour during wave-induced liquefaction

This paper presents the results of an experimental investigation of the complete sequence of sediment behaviour beneath progressive waves. The sediment was silty with d ₅₀ = 0.060 mm. Two kinds of measurements were carried out: pore-water pressure measurements (across the sediment depth), and water-surface elevation measurements. The process of liquefaction/compaction was videotaped from the side simultaneously with the pressure and water-surface elevation measurements. The video records were then analysed to measure: (i) the time development of the mudline, (ii) the time development of liquefaction and compaction fronts in the sediment and (iii) the characteristics of the orbital motion of the liquefied sediment including the motion of the interface between the water body and the sediment. The ranges of the various quantities in the tests were: wave height, H  = 9–17 cm, wave period, T  = 1.6 sec, water depth = 42 cm, and the Shields parameter = 0.34–0.59. The experiments reveal that, with the introduction of waves, excess pore pressure builds up, which is followed by liquefaction during which internal waves are experienced at the interface of the water body and the liquefied sediment, the sequence of processes known from a previous investigation. This sequence of processes is followed by dissipation of the accumulated excess pore pressure and compaction of the sediment which is followed by the formation of bed ripples. The present results regarding the dissipation and compaction appear to be in agreement with recent centrifuge wave-tank experiments. As for the final stage of the sequence of processes (formation of ripples), the ripple steepness (normalized with the angle of repose) for sediment with liquefaction history is found to be the same as that in sediment with no liquefaction history.     

Modeling of the classification behavior of the diaphragms used in multi-chamber cement mills

A new approach has been developed for describing the classification that arises at the diaphragm in multi-chamber ball mills. Fourteen industrial scale cement mills have been sampled in this study and after mass balancing, model fits of the equipment were done. Successive mill product predictions for the sampled conditions were achieved, and requirements to build up an optimization capable model are discussed.     

A Solution to the Problem of Predicting the Suitability of Silty–clayey Materials for Cement-stabilization

Major geotechnical problems in construction involving silty–clayey soils are due to their low strength, durability and high compressibility of soft soils, and the swell–shrink nature of the overconsolidated swelling soils. Confronted with these problems, a suitable ground improvement technique is needed, for deep excavations in soft clays, for stability, durability and deformation control. Cement-stabilization is one of the alternatives. An increase in strength and durability, reduction in deformability are the main aims of this method. Conventional cement-stabilization methods are used mainly for surface treatment. However, the use of cement has recently been extended to a greater depth in which cement columns were installed to act as a type of soil reinforcement (deep cement–soil mixing and cement jet grouting). In situ engineering properties of these silty–clayey soils are often variable and difficult to predict. For this reason cement-stabilization methods have a basic target to control the aforementioned engineering properties of these clays so that the properties of a silty–clayey soil become more like the properties of a soft rock such as clayey shale or lightly cemented sandstone. So cement-stabilization of these soils is essential to control their engineering properties and to predict their engineering behaviour for construction. In an effort to predict, classify and study the suitability of silty–clayey soils for cement-stabilization both slaking and unconfined compressive strength tests were carried out on clayey–sand mixtures consisted of two types of clays, kaolin and bentonite. Finally diagrams were prepared to study the variation of slaking and strength due to compaction, curing time and cement percentage and also to predict areas of efficient cement-stabilization.     

与全球变化有关的几个北极海洋地质问题

极地区域是全球变化研究的重点区域 ,在北极地区与全球变化有关的地质问题主要是北极地区的海陆变化对全球变化的影响 ,以及全球变化在地层中的记录。这涉及到北极形态变化及与其它大洋沟通的水道开闭情况 ,地形起伏对大气、大洋环流的影响 ,地壳升降与海平面变化对河流流量和海岸稳定性的影响 ,气体水合物及有机碳等变化对全球碳循环的影响 ,以及这些影响与气候变化信息在极地沉积物中的记录。文章在对上述影响及海洋地质研究状况进行探讨后 ,又简要介绍了中国的首次北极考察海洋地质研究状况     

四阶△－∑过抽样电路原理及其在微弱地学信号检测中的应用

传统的测量电路无法解决诸如海底大地电磁场这样微弱地学信号的检测问题。近几年诞生了一种称之为△-∑的电路理论以及相应的硬件芯片，给微伏级的弱信号检测开辟一条新的技术路径。文章介绍与地学探测有关的一种△-∑电路类型，该类型以低频段微弱信号为检测对象。采用系统理论和电路分析方法对△-∑原理作了较深入的讨论，阐明这种电路技术对提高微弱信号观测的分辨率是有效的。结合海底大地电磁探测中的信号采集问题，介绍了在仪器中把多路的被测模拟量变为数字量的技术过程。经对实际采集的海底信息的频谱曲线进行分析，证实所采用的△-∑技术以及多路信号采集的电路方案是合理的。     

环渤海地区油气资源探查的思考

回顾过去渤海勘探实践的经验，对于指导今后的研究工作是十分重要的。40年来渤海地区发现大量新老第三纪陆相石油资源，成为中国的重要产油区，也积累了丰富的勘探经验。深化环渤海地区油气资源的探查，首先应考虑前新生代海相油气资源。但其勘探是高难度的，前景是诱人的。应该认真贯彻下列认识原则：（1）区域指导局部；（2）深部制约浅层；（3）在地震处理解释创新的同时，大力发展综合地质地球物理研究。     

中扬子区寒武纪层序地层研究

笔者建立了中扬子区寒武系层序地层格架，研究了中扬子区层序界面和体系域特点，分析了中扬子区层序样式的基本类型及其特征。共划分出2个二级层序、14个三级层序。寒武系下统划分了1个二级层序(SS3)、6个三级层序(SQ1—SQ6)，平均延时约5．0Ma；体系域颜色普遍较深，泥质含量较高，是一套良好的烃源岩。寒武系中上统划分出1个二级层序(SS4)、8个三级层序(SQ7—SQ14)，平均延时约2．9Ma；体系域颜色普遍较浅，云质含量较高，是一套良好的储集层。总体上H型样式为主，T型样式和TH型样式数量相当，反映寒武纪水体中等。二级层序体系域和三级层序体系域都表现出明显的南北向差异性。     

广东大亚湾底质重金属分布特征与环境质量评价

大亚湾是粤东的大型海湾，毗邻深港，其环境质量现状及发展趋势颇受关注。对大亚湾海域45个表层站位、1口浅钻及2个柱状样重金属元素Hg、As、Cd、Cu、Pb、Cr、Zn进行分析，并对底质环境质量进行定量评价。其结果：①大亚湾海域Hg、As、Cu的污染指数Pi值均小于1．0，超标率为0，表明全区未受这些因子污染；②Cd、Zn、Pb、Cr的污染指数Pi值部分大于1．0，表明受到这些因子不同程度的污染，其中Pb的超标率最高，达93．3％，污染指数Pi值为0．83～2．25，为良好—中等污染，总体为轻微污染；Zn的超标率为76．9％，pf值为0．25～2．63，变化较大，总体为轻微污染；Cd的超标率为60．0％，Pi值为0．50～1．78，良好—轻微污染；Cr的超标率为17．8％，Pi值为0，49～1．90，良好—轻微污染；③综合污染指数为1．08～2．21，平均1．37，表明本区均不同程度地受重金属污染，总体属轻微污染，其中范和港污染最为严重，SQI值多在1．5以上，其次为中央列岛附近海域。湾口和澳头—霞涌近岸海域污染较轻。从钻孔及柱状样的重金属含量分布来看，在表层没有明显增多的趋势。     

浅论新疆海相火山热水沉积矿床的分带及其找矿意义

新疆海相火山热水沉积矿床，一般在时间上没有明显的集中生长期。空间上依附于活动大陆边缘火山岛弧带，它在区域上和矿床本身具有矿种转化、类型转换、配套与分带特征。以块状氧化物、块状碳酸盐和块状硫化物转换序次来研究该类矿床。利用铁木尔特铅锌矿上部铅锌下部铜金，预须开普台铁矿上铁下铜；莫托沙拉铁锰矿上锰下铁中间铅锌重晶石等矿种转化规律和由块状氧化物和块状碳酸盐向块状硫化物成生过渡特点，预测诸如蒙库铁矿、赤龙峰火山盆地中铁矿和喀喇昆仑山各铁矿床(点)外围与深部转换、发展成为铜金矿的成矿前景。     

鄂尔多斯盆地奥陶系马家沟组溶斑形成机理

鄂尔多斯盆地中部气田奥陶系马家沟组属蒸发边缘海相地层,其风化壳是中部气田的主要产气层段。该层中广泛发育毫米级、厘米级的溶斑,这些溶斑的产状、大小、成分以及溶孔内的充填物十分复杂,有的具多期充填,充填物为石膏、石英、方解石、白云石、高岭石、黄铁矿等多种矿物。溶斑中下半部残留的岩石经溶蚀后的白云石晶粒形成的渗流砂示底构造十分明显。研究表明,溶斑的形成不仅具有适宜的岩相古地理环境和其复杂的生成演化史,而且与原始沉积以及不同地史阶段的岩溶作用相关。