抗拔桩设计方法

当地下水位较高时,地下车库等附属建筑物不得不对抗浮问题进行考虑,抗拔桩被越来越多的应用于工程中。依据工程实例对抗拔桩设计荷载条件、抗浮桩单桩承载力设计、抗浮桩桩身结构设计、群桩地基整体稳定性、单位面积抗浮力、抗拔桩抗裂分别进行了阐述,以及抗拔桩设计中应考虑的问题进行了论述。     

煤层气开发利用与辽宁能源环境

对辽宁省主要煤田煤层气赋有条件及开发利用现状和开发潜力进行了研究评价。同时对辽宁省煤层气市场与煤层气开发效益进行了分析,并提出了重点目标区和开发利用建议。     

甘肃北祁连山寒山金矿床控矿条件与成矿模式

通过对该矿床成矿地质背景、矿床地质特征、成矿标志及控矿因素等诸方面分析，指出成矿物质主要来源于下奥陶统岛弧钙碱性安山—英安质火山碎屑岩，矿体受多级断裂裂隙系统的控制，且主要定位于韧—脆性剪切带内的强片理化带中，成矿作用发生于碰撞造山作用挤压—伸展转变期，花岗闪长岩、闪长岩等造山期中酸性岩体侵位期间及其以后，深部岩浆房或中酸性侵入体主要为矿床形成提供了热驱动力，矿床成因类型属与火山岩有关的构造蚀变岩型金矿床。在此基础上，总结归纳了该矿床的成矿模式与综合找矿标志。     

小秦岭金矿含金石英脉中石英晶体微形貌研究

利用微分干涉显微镜等手段对小秦岭金矿含金石英脉中不同成矿阶段的石英晶体微形貌进行了研究。石英晶体{101^-1}、{011^-1}、{101^-0}单形晶面上不同特征的微形貌对了解石英晶体的生长机理、生长速率、生长环境的变化及成矿溶液的过饱和度具有重要意义，同时也可提供成矿阶段划分及晶体生长时热力学条件的信息。     

鄂尔多斯盆地奥陶系马家沟组溶斑形成机理

鄂尔多斯盆地中部气田奥陶系马家沟组属蒸发边缘海相地层,其风化壳是中部气田的主要产气层段。该层中广泛发育毫米级、厘米级的溶斑,这些溶斑的产状、大小、成分以及溶孔内的充填物十分复杂,有的具多期充填,充填物为石膏、石英、方解石、白云石、高岭石、黄铁矿等多种矿物。溶斑中下半部残留的岩石经溶蚀后的白云石晶粒形成的渗流砂示底构造十分明显。研究表明,溶斑的形成不仅具有适宜的岩相古地理环境和其复杂的生成演化史,而且与原始沉积以及不同地史阶段的岩溶作用相关。     

Lateral tidal mixing in the Antarctic marginal seas

Tidal mixing plays an important role in the modification of dense water masses around the Antarctic continent. In addition to the vertical (diapycnal) mixing in the near-bottom layers, lateral mixing can also be of relevance in some areas. A numerical tide simulation shows that lateral tidal mixing is not uniformly distributed along the shelf break. In particular, strong mixing occurs all along the Ross Sea and Southern Weddell Sea shelf breaks, while other regions (e.g., the western Weddell Sea) are relatively quiet. The latter regions correspond surprisingly well to areas where indications for cross-shelf exchange of dense water masses have been found. The results suggest that lateral tidal mixing may account for the relatively small contribution of Ross Sea dense water masses to Antarctic Bottom Water.     

NNR constraint in ITRF2000 and the new global plate motion model NNR-ITRF2000VEL

There are 54 sites employed by ITRF2000 for ITRF2000 orientation. The deficiencies are obvious. First, these sites cannot well represent the rotation rate of the earth crust because there is no selected site in five out of fourteen tectonic plates and three of fourteen plates only have one site each. Second, the total angular momentum of the crust is non-vanishing in ITRF2000, even though it is declared that No Net Rotation (NNR) with respect to NNR-NUVEL1A is imposed on ITRF2000 construction according to the documentations of ITRF2000. So the NNR condition in conventional terrestrial reference system (CTRS) realization cannot be satisfied in ITRF2000. In this paper, the criteria of site selection for estimating the Euler vectors are suggested; the Tisserand system constraint equation in ITRF construction is derived; and as a product, the global plate motions can be obtained from the ITRF2000 construction.     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.     

Jurassic Dextral and Cretaceous Sinistral Movements Along the Hida Marginal Belt

The Hida marginal belt (HMB), which consists of various kinds of fault-bound blocks, is located between the continental massif of the Hida belt and the Mesozoic accretionary complex of the Mino belt in Central Japan. Detailed field investigation reveals that the HMB had grown through the two different movements, i.e., Jurassic dextral and Cretaceous sinistral movements. The Jurassic dextral ductile shear zones run in the southern marginal part of the Hida belt and the northern part of the HMB, whereas the Cretaceous sinistral cataclastic shear zones occur in the southern part of the HMB and the northern marginal part of the Mino belt. Geologic map and field evidence seem to suggest that the Jurassic dextral movement form the fault-bound blocks of the HMB to form the basic structure of the Hida marginal belt, i.e., formation of the ‘proto-HMB.’ Following the dextral movement, the sinistral one restructured the ‘proto-HMB’ to complete the present feature of the Hida marginal belt. The Cretaceous sinistral movement might result in the sinistral collision between the proto-HMB and the Mino belt.     

场地条件对地震动相干函数的影响

本通过弹性半空间内位错源的数值解法研究了曲岩地震动相干函数，采用有限元方法分析了一些典型场地的地表地震动相干函数，两的对比结果表明：复杂场地对地震动相干函数的影响强烈。